On Thu, Jul 20, 2006 at 05:32:12AM +0200, Pavel Machek wrote:
> Hi!
> > I'd rather say "call s2ram with the correct options" and let HAL figure
> > out the correct options.
>
> I'd prefer HAL figure out the complex options, but still leave
> "simple" whitelist inside s2ram.
Yes, that's fine wit
Hi!
> > > I believe we should start the "let the whitelist live in HAL" era :-)
> >
> > Okay, can you try to write parser with libxml?
>
> Well, we'd first need to have the infrastructure to match against. We
> have a (very primitive) pci-bus-scanner in the radeontool source. I
> wrote (well, c&
On Mon, Jul 10, 2006 at 12:15:19PM +0200, Pavel Machek wrote:
> > On Mon, Jul 10, 2006 at 12:48:40AM +0200, Pavel Machek wrote:
> >
> > > > consistently even when in X. The motherboard has an onboard VIA
> > > > graphics controller (Unichrome CLE266), and I'm using the X.org 7.1
> > > > server/dr
> On Mon, Jul 10, 2006 at 12:48:40AM +0200, Pavel Machek wrote:
>
> > > consistently even when in X. The motherboard has an onboard VIA
> > > graphics controller (Unichrome CLE266), and I'm using the X.org 7.1
> > > server/drivers and kernel 2.6.17 with VIA-specific AGP and DRI.
> >
> > Do you h
>
> > Do you have different PCI card than the person who submitted the
> > previous whitelist entry?
>
> The Epia-M only supports one PCI card. Mine is a DViCO FusionHDTV,
> which according to pciids.sourceforge.net has a vendor ID of 18ac and a
> device ID of d500. However, my initial tests we
On Mon, Jul 10, 2006 at 12:48:40AM +0200, Pavel Machek wrote:
> > consistently even when in X. The motherboard has an onboard VIA
> > graphics controller (Unichrome CLE266), and I'm using the X.org 7.1
> > server/drivers and kernel 2.6.17 with VIA-specific AGP and DRI.
>
> Do you have different
> Do you have different PCI card than the person who submitted the
> previous whitelist entry?
The Epia-M only supports one PCI card. Mine is a DViCO FusionHDTV,
which according to pciids.sourceforge.net has a vendor ID of 18ac and a
device ID of d500. However, my initial tests were done in a m
Hi!
> After several evenings of fighting with ACPI suspend-to-ram with my
> Epia-M motherboard, I ran across your project. My hearty thanks ...
> your instructions were clear and I managed to get my motherboard to
> suspend with a minimum of hassle.
>
> I would note that while my motherboard is
Dear suspend developers -
After several evenings of fighting with ACPI suspend-to-ram with my
Epia-M motherboard, I ran across your project. My hearty thanks ...
your instructions were clear and I managed to get my motherboard to
suspend with a minimum of hassle.
I would note that while my mothe
