one area you may need to check is your speaker settings. If the front
speakers are set to large then the sub will only work through a DSP
setting or 5.1 signal. If you set your front speakers to small then all
low freq below 80 hertz will be sent to the sub. no matter what setting
you are using.
Have fun and enjoy the music factory reset is your friend :)
Good catch by other posters to find out the pure direct mode migth
support the sub anyway ?
Wonder if not this pure direct modes comes from the analog 2 ch pass
trough the best AV amplifiers used to have ?
They are not designed that wa
..for the thoughtful and helpful comments. The amp used to output to the
front 2 speakers plus subwoofer in pure direct before I moved it. I'll
check the submenus again though in case I've missed something. Meanwhile
I've done factory reset on the amp and its now working fine in default
mode. I ap
OK so in a timely coincidence I was at a mates house and fiddling with
his Denon receiver. His is an older model but I noticed a setting for
main+sub in the menu.
On his receiver this makes the sub active in direct mode so may achieve
what you want.
---
toby10 wrote:
> Amp is fine and functioning as expected. Pure Direct requires all (or
> most) digital processing to be avoided and only outputs to L/R speakers.
> Typically a sub/sat system cannot use a "Pure" type setting as the sub
> won't function.
Hmm avoid that mode sounds like marketing h
YeehaaJC wrote:
> ... in the 'pure direct' high quality sound mode the subwoofer still
> cuts out, leaving only the front speakers. I've tried to resolve this
> too but without success and am now resigning myself to the probability
> that the amp is on its way out :=(
Amp is fine and functio
I believe that's the point of pure direct isn't it?
>From here
https://www.avforums.com/threads/denon-amp-sound-settings-direct-mode.1807695/
avforums wrote:
>
> 'Direct Playback'.
>
> In this mode the signals bypass the tone adjustment circuitry for high
> quality sound.*
> The sounds is ou
Many thanks for the reply. I already had the amp configured as you
suggest and it was working fine before I moved it. But you're right it
is an amp issue. After much experimentation I did a factory reset. It
now works in the default mode but in the 'pure direct' high quality
sound mode the subwoof
YeehaaJC wrote:
> Hi
>
> I have a peculiar problem I hope someone can help me with.
>
> Because of decorating I had to dismantle my hifi. Now I've rebuilt it
> there's a peculiar problem. My SBT outputs sound to the two front
> speakers (of a 5.1 system) but the subwoofer - which was previously
Hi
I have a peculiar problem I hope someone can help me with.
Because of decorating I had to dismantle my hifi. Now I've rebuilt it
there's a peculiar problem. My SBT outputs sound to the two front
speakers (of a 5.1 system) but the subwoofer - which was previously
working fine - now no longer k
10 matches
Mail list logo
