> Subject: [PATCH 2/5] misc: scu_api: Add new APIs for clk-imx8 driver
>
> Add sc_misc_set_control to write the subsystem's DSC GPR registers, and
> sc_pm_set_clock_parent to select parent clock source.
>
> Signed-off-by: Ye Li
> ---
> arch/arm/include/asm/arch-imx8/sci/sci.h| 4 ++
>
> Subject: [PATCH 1/5] imx8: Add lpcg driver for iMX8QM/QXP
>
[...]
>
> diff --git a/arch/arm/include/asm/arch-imx8/imx8qm_lpcg.h
> b/arch/arm/include/asm/arch-imx8/imx8qm_lpcg.h
> new file mode 100644
> index 000..692c27f
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-imx8/imx8qm_lpcg.h
Add support for more clocks used by iMX8 from DTB:
ref_clock, tx_2x_clock, ahb_clock
And update get clock rate interface to support multiple fec ports.
Signed-off-by: Ye Li
---
drivers/net/fec_mxc.c | 47 ++-
drivers/net/fec_mxc.h | 1 +
2 files chang
Encounter malloc failure in arch_cpu_init_dm when binding "fsl,imx8-mu" node
with imx8_scu driver. So increase the early malloc pool to fix the issue.
Signed-off-by: Ye Li
---
configs/imx8qm_mek_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/imx8qm_mek_defc
Update imx8 clock driver to support LPCG and full clocks tree for some
modules aligned with kernel.
We classify the clock into serveral types: slice, fixed, lpcg, gpr and mux.
Generally slice and fixed clocks are the sources. lpcg, gpr and mux are
the downstream of those sources and are used for g
Add sc_misc_set_control to write the subsystem's DSC GPR registers,
and sc_pm_set_clock_parent to select parent clock source.
Signed-off-by: Ye Li
---
arch/arm/include/asm/arch-imx8/sci/sci.h| 4 ++
arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h | 7
arch/arm/include/asm/arch-imx
Each module may have one or more lpcg registers for SW/HW enabling its
clocks. Add lpcg register address and its driver for accessing lpcg.
Signed-off-by: Ye Li
---
arch/arm/include/asm/arch-imx8/imx8qm_lpcg.h | 200 ++
arch/arm/include/asm/arch-imx8/imx8qxp_lpcg.h | 195
This patch cleans up some coding style related issues in the mtk_wtd
driver to make this driver comply again with the U-Boot coding style
standards.
The only minimal functional change is that the timeout parameter is now
passed in (u64) instead of (unsigned int) from mtk_wdt_start() to
mtk_wdt_set
> -Original Message-
> From: U-Boot On Behalf Of Ramon Fried
> Sent: Tuesday, June 11, 2019 8:50 PM
> To: u-boot@lists.denx.de
> Cc: Joe Hershberger
> Subject: [U-Boot] [PATCH 6/6] net: macb: apply sane DMA configuration
>
> DMA configuration was heavily dependent on the HW defaults, a
> -Original Message-
> From: U-Boot On Behalf Of Ramon Fried
> Sent: Tuesday, June 11, 2019 8:49 PM
> To: u-boot@lists.denx.de
> Cc: Joe Hershberger
> Subject: [U-Boot] [PATCH 4/6] net: macb: add support for SGMII phy
> interface
>
> This patch adds support for the sgmii phy interface,
> -Original Message-
> From: U-Boot On Behalf Of Ramon Fried
> Sent: Tuesday, June 11, 2019 8:49 PM
> To: u-boot@lists.denx.de
> Cc: Joe Hershberger
> Subject: [U-Boot] [PATCH 5/6] net: macb: add dma_burst_length config
>
> GEM support higher DMA burst writes/reads than the default (4)
> -Original Message-
> From: U-Boot On Behalf Of Ramon Fried
> Sent: Tuesday, June 11, 2019 8:49 PM
> To: u-boot@lists.denx.de
> Cc: Joe Hershberger
> Subject: [U-Boot] [PATCH 3/6] net: macb: use bit access macro from header
> file
>
> macb.h provides macros for reading/setting bitfiel
> -Original Message-
> From: U-Boot On Behalf Of Ramon Fried
> Sent: Tuesday, June 11, 2019 8:49 PM
> To: u-boot@lists.denx.de
> Cc: Joe Hershberger
> Subject: [U-Boot] [PATCH 2/6] net: macb: add support for faster clk rates
>
> add support for clock rates higher than 2.4Mhz
>
> Signe
> -Original Message-
> From: U-Boot On Behalf Of Ramon Fried
> Sent: Tuesday, June 11, 2019 8:49 PM
> To: u-boot@lists.denx.de
> Cc: Joe Hershberger
> Subject: [U-Boot] [PATCH 1/6] net: macb: sync header definitions as taken
> from Linux
>
> Few registers and bits were added by Cadence
If U-Boot is loaded and started from TF-A (you need to change
SYS_TEXT_BASE to 0x6000), it will hang up at flash initialization.
If secure mode is off (default, or -machine virt,secure=off) at qemu,
it will provide dtb with two flash memory banks:
flash@0 {
bank-width =
Currently, CONFIG_TFABOOT is located in armv8/fsl-layerscape Kconfig,
but it will be also useful for other targets if some additional
configuration are necessary.
So move it to arch/arm/Kconfig.
Please note that CONFIG_TFABOOT still depends on
CONFIG_ARCH_SUPPORT_TFABOOT and so the menu won't come
With this patch, hang-up of U-Boot, as described in patch#2, will be fixed
if it is loaded and started from TF-A.
Changes in v2 (July 3, 2019)
* add patch#1 (preparatory patch)
* remove a reference to unnecessary patch in the commit message
AKASHI Takahiro (2):
arm: move CONFIG_TFABOOT to gener
On Wed, Jul 3, 2019 at 1:57 AM Michal Suchanek wrote:
>
> Use the wrapper because the unwrapped function prototype will be changed
> in the following patch.
>
> Signed-off-by: Michal Suchanek
> ---
> v2: usb_submit_int_msg -> usb_int_msg
> ---
> common/usb_storage.c | 2 +-
> 1 file changed, 1 i
Hi Michal,
On Wed, Jul 3, 2019 at 1:57 AM Michal Suchanek wrote:
>
> On error the data buffer does not contain valid data so do not submit it
> for processing. Usually it will contain the last data recieved so the
> last pressed key will be repeated indefinitely on device failure.
>
> Signed-off-
Hi Peter,
On 1 July 2019 9:35:48 PM IST, Peter Robinson wrote:
>Hi,
>
>Some improvements to the Rock960, tested locally on a v1.2 board. Most
>are self explanatory in the patches.
Many thanks for your work!
The series looks good to me but I don't have time to test it on Rock960 until
Friday. H
Hi Alex,
On Wed, Jul 3, 2019 at 1:46 AM Alex Marginean wrote:
>
> Hi Bin,
>
> On 7/1/2019 11:08 AM, Bin Meng wrote:
> > Hi Alex,
> >
> > On Thu, Jun 20, 2019 at 10:48 PM Alex Marginean
> > wrote:
> >>
> >> LS1028A ethernet interfaces work with at least 8 BDs, set number of buffers
> >> to match
On 1 July 2019 9:35:54 PM IST, Peter Robinson wrote:
>Enable USB3 support via the dwc3 XHCI driver.
>
>Signed-off-by: Peter Robinson
Reviewed-by: Manivannan Sadhasivam
Thanks,
Mani
>---
> configs/rock960-rk3399_defconfig | 3 +++
> 1 file changed, 3 insertions(+)
>
>diff --git a/configs/rock9
On 1 July 2019 9:35:53 PM IST, Peter Robinson wrote:
>As the Rock960 doesn't have an onboard wired ethernet interface
>it's useful to have some common USB wired ethernet devices added
>to enable testing.
>
>Signed-off-by: Peter Robinson
Reviewed-by: Manivannan Sadhasivam
Thanks,
Mani
>---
>
On 1 July 2019 9:35:52 PM IST, Peter Robinson wrote:
>Enable the SDMA controller so the eMMC connected to the SDHCI
>controller (sdhci@fe33) can make use of it.
>
>Signed-off-by: Peter Robinson
Reviewed-by: Manivannan Sadhasivam
Thanks,
Mani
>---
> configs/rock960-rk3399_defconfig | 1 +
On 1 July 2019 9:35:51 PM IST, Peter Robinson wrote:
>We have both PMIC and Regulator functionality so it's useful to
>be able to see output and debug with the commands enabled.
>
>Signed-off-by: Peter Robinson
Reviewed-by: Manivannan Sadhasivam
Thanks,
Mani
>---
> configs/rock960-rk3399_def
On 1 July 2019 9:35:50 PM IST, Peter Robinson wrote:
>The Rock960 doesn't contain SPI flash so drop related config options.
>
>Signed-off-by: Peter Robinson
Reviewed-by: Manivannan Sadhasivam
Thanks,
Mani
>---
> configs/rock960-rk3399_defconfig | 2 --
> 1 file changed, 2 deletions(-)
>
>dif
On 1 July 2019 9:35:49 PM IST, Peter Robinson wrote:
>Sync the dts files for the Rock960 boards from Linux to get the
>latest changes and fixes for the devices.
>
>Signed-off-by: Peter Robinson
Reviewed-by: Manivannan Sadhasivam
Thanks,
Mani
>---
> arch/arm/dts/rk3399-ficus.dts| 92 +++
On 7/2/19 11:54 PM, Adam Ford wrote:
> On Tue, Jul 2, 2019 at 4:41 PM Marek Vasut wrote:
>>
>> On 7/2/19 11:30 PM, Adam Ford wrote:
>>
>> [...]
>>
>>> @@ -0,0 +-2,466 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * Texas Instruments da8xx "glue layer"
>>> + *
>>> + * Copyright (c) 2010
On Tue, Jul 2, 2019 at 4:41 PM Marek Vasut wrote:
>
> On 7/2/19 11:30 PM, Adam Ford wrote:
>
> [...]
>
> > @@ -0,0 +-2,466 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Texas Instruments da8xx "glue layer"
> > + *
> > + * Copyright (c) 2010, by Texas Instruments
> > + *
> > + * Based
On 7/2/19 11:30 PM, Adam Ford wrote:
[...]
> @@ -0,0 +-2,466 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Texas Instruments da8xx "glue layer"
> + *
> + * Copyright (c) 2010, by Texas Instruments
> + *
> + * Based on the DA8xx "glue layer" code.
> + * Copyright (c) 2008-2009, MontaVista
On Tue, Jul 02, 2019 at 05:25:31PM +0800, Kever Yang wrote:
> Hi Tom,
>
> Please pull some rockchip updates:
>
> - fix for atf bl31_image_info pointer
> - fix for rockpro64 vdd_log init
> - fix for tinker-rk3288 SPL size too big
>
> https://travis-ci.org/keveryang/u-boot/builds/553096186
>
> T
The da8xx can support the MUSB OTG controller. This patch enables
it in host mode. There is still work to do for device/OTG, but
this has been broken for a while, so host-only is still better
than nothing at all.
Signed-off-by: Adam Ford
diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/
With the MUSB now available with host-only support, this
patch enables it for the various versions of the da850-evm.
Signed-off-by: Adam Ford
diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
index 8affb8db23..bfddf4d020 100644
--- a/configs/da850evm_defconfig
+++ b/configs/da
Hi Simon,
On Sat, Jun 22, 2019 at 08:09:51PM +0100, Simon Glass wrote:
> On Thu, 23 May 2019 at 16:33, Eugeniu Rosca wrote:
> >
> > Rename:
> > - doc/{README.avb2 => android/avb2.txt}
>
> This should be in a separate patch since it isn't related to adding
> the new docs, actually.
I will incor
Hi Sam,
On Tue, Jul 02, 2019 at 09:11:45PM +0300, Sam Protsenko wrote:
> Hi Eugeniu,
[..]
> Sorry for the late review, but it seems like some links to renamed doc
> weren't changed properly (easily found by grep). Can you please add
> change [1] to this patch, so that we don't need to send it se
On 7/2/19 9:35 PM, Michal Suchánek wrote:
> On Tue, 2 Jul 2019 20:41:04 +0200
> Marek Vasut wrote:
>
>> On 7/2/19 7:55 PM, Michal Suchanek wrote:
>>
>> Commit message is still missing ...
>>
>>> Signed-off-by: Michal Suchanek
>> [...]
>
> It says "usb: sl811-hcd: return -ENOTSUPP from unimple
On 7/2/19 9:31 PM, Michal Suchánek wrote:
> On Tue, 2 Jul 2019 20:38:27 +0200
> Marek Vasut wrote:
>
>> On 7/2/19 7:50 PM, Michal Suchánek wrote:
>>> On Tue, 2 Jul 2019 18:58:54 +0200
>>> Marek Vasut wrote:
>>>
On 7/2/19 4:22 PM, Michal Suchánek wrote:
> On Tue, 2 Jul 2019 15:11:07
On Tue, 02 Jul 2019 22:08:33 +0200
marvi...@posteo.de marvi...@posteo.de wrote:
> Fixes: 57e7775413 ("video: backlight: Parse PWM polarity cell")
>
> set_pwm will always fail with -ENOSYS if pwm_set_invert is not implemented,
> leaving the backlight dark. Fix this by returning no error if
> pwm_s
On Tue, Jul 02, 2019 at 07:35:31PM +0200, Heinrich Schuchardt wrote:
> > This always felt somewhat precarious to me.
> >
> > Could you possibly:
> > - add 'set debug=linux' in your grub.cfg and paste the logs
> > - add some printouts to arm32-stub.c
> > ?
>
> That debug output is ever so strange.
On Tue, 2 Jul 2019 20:41:04 +0200
Marek Vasut wrote:
> On 7/2/19 7:55 PM, Michal Suchanek wrote:
>
> Commit message is still missing ...
>
> > Signed-off-by: Michal Suchanek
> [...]
It says "usb: sl811-hcd: return -ENOTSUPP from unimplemented
submit_int_msg"
Thanks
Michal
On Tue, 2 Jul 2019 20:38:27 +0200
Marek Vasut wrote:
> On 7/2/19 7:50 PM, Michal Suchánek wrote:
> > On Tue, 2 Jul 2019 18:58:54 +0200
> > Marek Vasut wrote:
> >
> >> On 7/2/19 4:22 PM, Michal Suchánek wrote:
> >>> On Tue, 2 Jul 2019 15:11:07 +0200
> >>> Marek Vasut wrote:
> >>>
> >>>
Hi Joe,
On 7/2/2019 12:17 AM, Joe Hershberger wrote:
On Wed, Jun 19, 2019 at 4:07 AM Alexandru Marginean
wrote:
Current code fails to probe some C45 PHYs that also respond to C22 reads.
This is the case for PHYs like Aquantia AQR112, Marvell 88X2242 (as
previously posted on the u-boot list).
On 7/1/2019 11:15 AM, Bin Meng wrote:
Hi Alex,
On Wed, Jun 19, 2019 at 5:07 PM Alexandru Marginean
wrote:
Current code fails to probe some C45 PHYs that also respond to C22 reads.
This is the case for PHYs like Aquantia AQR112, Marvell 88X2242 (as
previously posted on the u-boot list).
If the
On Tue, 2019-06-25 at 06:30 +, Anup Patel wrote:
> This series update SiFive Unleashed clock driver and Cadence MACB
> driver
> so that:
> 1. It is in sync with upstream Linux driver
> 2. It uses latest DT bindings as-per upstream Linux driver
>
> With this series, we can now use latest DT bin
On 02.07.19 18:52, Heinrich Schuchardt wrote:
On 7/2/19 6:16 PM, Alexander Graf wrote:
On 30.06.19 17:17, Heinrich Schuchardt wrote:
Hello Alex,
the test/py/tests/test_efi_loader.py test for GRUB is failing for me. I
get the following output:
=> tftpboot 4000 orangepi-pc/grubarm.efi
Usi
On 6/30/19 3:38 AM, André Przywara wrote:
> On 30/06/2019 00:03, Marek Vasut wrote:
>
> Marek,
>
> you seem to be quite defensive in your answer
I am just correcting the mistakes I perceive in the previous email.
>, but I was just talking
> against merging ATF into U-Boot, not against U-Boot -
On 7/2/19 7:55 PM, Michal Suchanek wrote:
Commit message is still missing ...
> Signed-off-by: Michal Suchanek
[...]
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On 7/2/19 7:50 PM, Michal Suchánek wrote:
> On Tue, 2 Jul 2019 18:58:54 +0200
> Marek Vasut wrote:
>
>> On 7/2/19 4:22 PM, Michal Suchánek wrote:
>>> On Tue, 2 Jul 2019 15:11:07 +0200
>>> Marek Vasut wrote:
>>>
On 7/2/19 3:04 PM, Michal Suchánek wrote:
> On Tue, 2 Jul 2019 13:58:30
On 7/2/19 12:20 PM, Sam Protsenko wrote:
sgdisk 0.8.10.2 from AOSP doesn't support short options, failing with
errors like this:
sgdisk: invalid option -- 'U'
Test fails due to that error. Let's use long options to make the test
work with any sgdisk version.
Acked-by: Stephen Warren
..
sgdisk 0.8.10.2 from AOSP doesn't support short options, failing with
errors like this:
sgdisk: invalid option -- 'U'
Test fails due to that error. Let's use long options to make the test
work with any sgdisk version.
Signed-off-by: Sam Protsenko
---
test/py/tests/test_gpt.py | 11 +++-
Signed-off-by: Sam Protsenko
---
test/py/tests/{ => test_android}/test_avb.py | 0
1 file changed, 0 insertions(+), 0 deletions(-)
rename test/py/tests/{ => test_android}/test_avb.py (100%)
diff --git a/test/py/tests/test_avb.py b/test/py/tests/test_android/test_avb.py
similarity index 100%
ren
Signed-off-by: Sam Protsenko
---
.../fastboot-protocol.txt}| 0
doc/android/fastboot.txt | 4 ++--
2 files changed, 2 insertions(+), 2 deletions(-)
rename doc/{README.android-fastboot-protocol => android/fastboot-protocol.t
Hi Eugeniu,
On Thu, May 23, 2019 at 6:33 PM Eugeniu Rosca wrote:
>
> Rename:
> - doc/{README.avb2 => android/avb2.txt}
> - doc/{README.android-fastboot => android/fastboot.txt}
>
> Add a new file documenting the 'bcb' command:
> - doc/android/bcb.txt
>
> The new directory structure has been re
On Tue, 2 Jul 2019 19:50:05 +0200
Michal Suchánek wrote:
> On Tue, 2 Jul 2019 18:58:54 +0200
> Marek Vasut wrote:
>
> > On 7/2/19 4:22 PM, Michal Suchánek wrote:
> > > On Tue, 2 Jul 2019 15:11:07 +0200
> > > Marek Vasut wrote:
> > >
> > >> On 7/2/19 3:04 PM, Michal Suchánek wrote:
>
Hi Igor,
On Tue, Jul 2, 2019 at 11:51 AM Igor Opaniuk wrote:
>
> From: Ruslan Trofymenko
>
> Add support for A/B boot process on AM57xx based boards:
>
> 1. Define 'slot_suffix' variable (using 'ab_select' command)
> 2. Extend 'emmc_android_boot' boot command (add commands for A/B boot
>
Use the wrapper because the unwrapped function prototype will be changed
in the following patch.
Signed-off-by: Michal Suchanek
---
v2: usb_submit_int_msg -> usb_int_msg
---
common/usb_storage.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/common/usb_storage.c b/common/usb
Variant of the int_msg wrapper that does not introduce excessive retry
delay on error.
Signed-off-by: Michal Suchanek
---
v2: usb_submit_int_msg -> usb_int_msg
---
common/usb.c | 9 +
include/usb.h | 2 ++
2 files changed, 11 insertions(+)
diff --git a/common/usb.c b/common/usb.c
index
An USB 1.1 keyboard connected to dwc2 through a high-speed hub does not
report status until it changes. With this patch you can enable keyboard
by pressing a key while USB devices are probed. Without a keypress no
state is reported and the probe times out. We don't want to wait for a
keypress or ti
This aligns naming with usb_bulk_msg and usb_control_msg.
Signed-off-by: Michal Suchanek
---
v2: new patch
---
common/usb.c | 2 +-
common/usb_kbd.c | 6 +++---
include/usb.h| 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/common/usb.c b/common/usb.c
index b70f614d2
With the following patch it avoids excessive delays with USB 1.1
keyboard connected to high-speed USB hub conncted to dwc2.
Signed-off-by: Michal Suchanek
---
v2: usb_submit_int_msg -> usb_int_msg
---
common/usb_kbd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/common/usb
On error the data buffer does not contain valid data so do not submit it
for processing. Usually it will contain the last data recieved so the
last pressed key will be repeated indefinitely on device failure.
Signed-off-by: Michal Suchanek
---
v2: fix indentation
---
common/usb_kbd.c | 7 +++
This will be used to implement non-blocking keyboard polling in case of
errors.
Signed-off-by: Michal Suchanek
---
v2: ad missing hunk from last patch
---
common/usb.c | 2 +-
drivers/usb/host/dwc2.c | 12 +++-
drivers/usb/host/ehci-hcd.c | 13 ++
Signed-off-by: Michal Suchanek
---
drivers/usb/host/sl811-hcd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index daba0dcd1aee..4fd2ad464312 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-h
Signed-off-by: Michal Suchanek
---
drivers/usb/host/r8a66597-hcd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 3c263e51c160..7b699d3f4788 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/
linux-mainline with multi_v7_defconfig + Android configs takes more
space than regular TI Android kernel and bootm will fail to load it.
Let's increase max kernel size up to 64 MiB to make it possible to run
such kernel.
Signed-off-by: Sam Protsenko
---
include/configs/am57xx_evm.h | 2 ++
1 fil
linux-mainline with multi_v7_defconfig + Android configs takes more
space than regular TI Android kernel. Let's increase boot partition
twice, so that boot_fit.img (with new zImage in it) can fit into "boot"
partition.
Signed-off-by: Sam Protsenko
---
include/environment/ti/boot.h | 2 +-
1 file
Hi Igor,
On Tue, Jul 2, 2019 at 11:51 AM Igor Opaniuk wrote:
>
> From: Ruslan Trofymenko
>
> Add a short documentation for A/B enablement and 'ab_select' command
> usage.
>
> Signed-off-by: Ruslan Trofymenko
> Signed-off-by: Igor Opaniuk
> Reviewed-by: Alistair Strachan
> Reviewed-by: Sam Pro
On Tue, 2 Jul 2019 18:58:54 +0200
Marek Vasut wrote:
> On 7/2/19 4:22 PM, Michal Suchánek wrote:
> > On Tue, 2 Jul 2019 15:11:07 +0200
> > Marek Vasut wrote:
> >
> >> On 7/2/19 3:04 PM, Michal Suchánek wrote:
> >>> On Tue, 2 Jul 2019 13:58:30 +0200
> >>> Marek Vasut wrote:
> >>>
> >>>
On 7/1/2019 11:08 AM, Bin Meng wrote:
Hi Alex,
On Thu, Jun 20, 2019 at 10:48 PM Alex Marginean
wrote:
The commit title says: rds. It should be rdb.
You're right, I'll fix it. You have a really good eye for detail!
Thank you!
Alex
Enables ethernet, MDIO, PHY drivers for LS1028A RDB a
Hi Igor,
On Tue, Jul 2, 2019 at 11:51 AM Igor Opaniuk wrote:
>
> From: Ruslan Trofymenko
>
> Add sandbox test for 'ab_select' command.
>
> Test: ./test/py/test.py --bd sandbox --build -k test_ab
>
> Signed-off-by: Ruslan Trofymenko
> Signed-off-by: Igor Opaniuk
> Reviewed-by: Alistair Strachan
Hi Bin,
On 7/1/2019 11:08 AM, Bin Meng wrote:
Hi Alex,
On Thu, Jun 20, 2019 at 10:48 PM Alex Marginean
wrote:
LS1028A ethernet interfaces work with at least 8 BDs, set number of buffers
to match that.
Signed-off-by: Alex Marginean
---
include/configs/ls1028a_common.h | 4
1 file ch
On 7/2/19 6:55 PM, Leif Lindholm wrote:
Hello Heinrich,
On Sat, Jun 29, 2019 at 07:47:10PM +0200, Heinrich Schuchardt wrote:
Hello Leif,
the Wandboard Quad rev B1 cannot be booted via U-Boot, GRUB-efi-arm.
GRUB loads the initial ramdisk into an area which the the mainline
4.19.55 kernel simply
On Tue, Jul 02, 2019 at 07:12:11PM +0200, Heinrich Schuchardt wrote:
> > After LoadImage is called, the EFI stub of the kernel image determines
> > where the runtime kernel is going to be decompressed to (and I think
> > relocates zImage if necessary), and reserves this area, before
> > actually ju
On 7/2/19 4:22 PM, Michal Suchánek wrote:
> On Tue, 2 Jul 2019 15:11:07 +0200
> Marek Vasut wrote:
>
>> On 7/2/19 3:04 PM, Michal Suchánek wrote:
>>> On Tue, 2 Jul 2019 13:58:30 +0200
>>> Marek Vasut wrote:
>>>
On 7/1/19 5:56 PM, Michal Suchanek wrote:
> Causes unbound key repeat o
On 7/2/19 6:04 PM, Troy Benjegerdes wrote:
>
>
>> On Jun 22, 2019, at 2:43 PM, Marek Vasut wrote:
>>
>> On 6/22/19 9:12 PM, Heinrich Schuchardt wrote:
>>> On 6/22/19 8:15 PM, Simon Glass wrote:
Hi,
On Sat, 22 Jun 2019 at 16:10, Andreas Färber wrote:
>
> Hi Simon,
>
>>
On 7/2/19 6:55 PM, Leif Lindholm wrote:
Hello Heinrich,
On Sat, Jun 29, 2019 at 07:47:10PM +0200, Heinrich Schuchardt wrote:
Hello Leif,
the Wandboard Quad rev B1 cannot be booted via U-Boot, GRUB-efi-arm.
GRUB loads the initial ramdisk into an area which the the mainline
4.19.55 kernel simply
Hello Heinrich,
On Sat, Jun 29, 2019 at 07:47:10PM +0200, Heinrich Schuchardt wrote:
> Hello Leif,
>
> the Wandboard Quad rev B1 cannot be booted via U-Boot, GRUB-efi-arm.
> GRUB loads the initial ramdisk into an area which the the mainline
> 4.19.55 kernel simply does not accept because it think
On 7/2/19 6:16 PM, Alexander Graf wrote:
On 30.06.19 17:17, Heinrich Schuchardt wrote:
Hello Alex,
the test/py/tests/test_efi_loader.py test for GRUB is failing for me. I
get the following output:
=> tftpboot 4000 orangepi-pc/grubarm.efi
Using ethernet@1c3 device
TFTP from server 192.
On 28.06.19 19:39, Heinrich Schuchardt wrote:
We are implementing UEFI variable RuntimeServicesSupported and set the
unimplemented runtime functions return EFI_UNSUPPORTED as described in UEFI
specification 2.8. So let's also advertise this specification version in
our system table.
Signed-off-
On 29.06.19 03:59, Heinrich Schuchardt wrote:
ConvertPointer() must be EFIAPI. The first parameter should be of type
efi_uint_t. Use the same parameter name as the UEFI specification.
Signed-off-by: Heinrich Schuchardt
Reviewed-by: Alexander Graf
Alex
---
include/efi_api.h | 3 ++-
On 30.06.19 07:27, Heinrich Schuchardt wrote:
The current short description has a typo. Let it stand out clear that we
provide unit tests.
Improve the description of the CMD_BOOTEFI_SELFTEST configuration option.
Signed-off-by: Heinrich Schuchardt
---
lib/efi_selftest/Kconfig | 8
On 30.06.19 17:17, Heinrich Schuchardt wrote:
Hello Alex,
the test/py/tests/test_efi_loader.py test for GRUB is failing for me. I
get the following output:
=> tftpboot 4000 orangepi-pc/grubarm.efi
Using ethernet@1c3 device
TFTP from server 192.168.123.3; our IP address is 192.168.123.8
> On Jun 22, 2019, at 2:43 PM, Marek Vasut wrote:
>
> On 6/22/19 9:12 PM, Heinrich Schuchardt wrote:
>> On 6/22/19 8:15 PM, Simon Glass wrote:
>>> Hi,
>>>
>>> On Sat, 22 Jun 2019 at 16:10, Andreas Färber wrote:
Hi Simon,
Am 22.06.19 um 16:55 schrieb Simon Glass:
> I'
On Tue, 2 Jul 2019 23:39:42 +0800
Bin Meng wrote:
> On Tue, Jul 2, 2019 at 11:30 PM Michal Suchánek wrote:
> >
> > On Tue, 2 Jul 2019 23:11:01 +0800
> > Bin Meng wrote:
> >
> > > Hi Michal,
> > >
> > > On Tue, Jul 2, 2019 at 10:58 PM Michal Suchánek
> > > wrote:
> > > >
> > > > On Tue, 2
On Tue, Jul 2, 2019 at 11:30 PM Michal Suchánek wrote:
>
> On Tue, 2 Jul 2019 23:11:01 +0800
> Bin Meng wrote:
>
> > Hi Michal,
> >
> > On Tue, Jul 2, 2019 at 10:58 PM Michal Suchánek wrote:
> > >
> > > On Tue, 2 Jul 2019 22:29:42 +0800
> > > Bin Meng wrote:
> > >
> > > > Hi Michal,
> > > >
> >
OHCI was added with DM_USB support, so there are a few unneeded
items in the header file that can be removed. This also
unifies da850evm with NOR and NAND booting options so all have
OHCI support.
Signed-off-by: Adam Ford
diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
inde
On 7/2/19 9:24 AM, Bin Meng wrote:
Hi Joshua,
On Tue, Jul 2, 2019 at 9:26 PM Joshua Watt wrote:
Converts qemu x86 machines to boot using distro_config. The intent is to
allow u-boot in qemu to be maximally compatible with many boot methods
without having to change the config. Previously, u-bo
On Tue, 2 Jul 2019 23:11:01 +0800
Bin Meng wrote:
> Hi Michal,
>
> On Tue, Jul 2, 2019 at 10:58 PM Michal Suchánek wrote:
> >
> > On Tue, 2 Jul 2019 22:29:42 +0800
> > Bin Meng wrote:
> >
> > > Hi Michal,
> > >
> > > On Tue, Jul 2, 2019 at 10:25 PM Michal Suchánek
> > > wrote:
> > > >
>
Hi Michal,
On Tue, Jul 2, 2019 at 10:58 PM Michal Suchánek wrote:
>
> On Tue, 2 Jul 2019 22:29:42 +0800
> Bin Meng wrote:
>
> > Hi Michal,
> >
> > On Tue, Jul 2, 2019 at 10:25 PM Michal Suchánek wrote:
> > >
> > > On Tue, 2 Jul 2019 22:16:02 +0800
> > > Bin Meng wrote:
> > >
> > > > Hi Michal,
On Tue, 2 Jul 2019 22:29:42 +0800
Bin Meng wrote:
> Hi Michal,
>
> On Tue, Jul 2, 2019 at 10:25 PM Michal Suchánek wrote:
> >
> > On Tue, 2 Jul 2019 22:16:02 +0800
> > Bin Meng wrote:
> >
> > > Hi Michal,
> > >
> > > On Tue, Jul 2, 2019 at 10:14 PM Michal Suchánek
> > > wrote:
> > > >
>
Hi Michal,
On Tue, Jul 2, 2019 at 10:25 PM Michal Suchánek wrote:
>
> On Tue, 2 Jul 2019 22:16:02 +0800
> Bin Meng wrote:
>
> > Hi Michal,
> >
> > On Tue, Jul 2, 2019 at 10:14 PM Michal Suchánek wrote:
> > >
> > > On Tue, 2 Jul 2019 13:59:49 +0200
> > > Marek Vasut wrote:
> > >
> > > > On 7/1/
On Tue, 2 Jul 2019 22:16:02 +0800
Bin Meng wrote:
> Hi Michal,
>
> On Tue, Jul 2, 2019 at 10:14 PM Michal Suchánek wrote:
> >
> > On Tue, 2 Jul 2019 13:59:49 +0200
> > Marek Vasut wrote:
> >
> > > On 7/1/19 5:56 PM, Michal Suchanek wrote:
> > > > Signed-off-by: Michal Suchanek
> > > > ---
Hi Joshua,
On Tue, Jul 2, 2019 at 9:26 PM Joshua Watt wrote:
>
> Converts qemu x86 machines to boot using distro_config. The intent is to
> allow u-boot in qemu to be maximally compatible with many boot methods
> without having to change the config. Previously, u-boot would only boot
> in a very
On Tue, 2 Jul 2019 15:11:07 +0200
Marek Vasut wrote:
> On 7/2/19 3:04 PM, Michal Suchánek wrote:
> > On Tue, 2 Jul 2019 13:58:30 +0200
> > Marek Vasut wrote:
> >
> >> On 7/1/19 5:56 PM, Michal Suchanek wrote:
> >>> Causes unbound key repeat on error otherwise.
> >>>
> >>> Signed-off-by: Mic
Hi Aiden,
On Wed, Jun 26, 2019 at 7:19 AM Park, Aiden wrote:
>
> - Get serial port information from the serial port info hob
Again, the same question: does this serial port info hob apply to FSP
based board? (eg: newer FSP produces such hob for bootloader to use?)
If yes, we probably need rename
Hi Aiden,
On Wed, Jun 26, 2019 at 7:15 AM Park, Aiden wrote:
>
Since this is the first patch in the series, could you please add a
brief description about slim bootloader?
> - Added CONFIG_SYS_SLIMBOOTLOADER to enable slimbootloader CPU type
nits: Added -> Add
> - Added new arch/x86/cpu/slimb
Hi Aiden,
On Wed, Jun 26, 2019 at 7:17 AM Park, Aiden wrote:
>
> - Added a function to get a GUID HOB data pointer from hob_list
>
We need some changes to arch/x86/lib/fsp/fsp_support.c: move these
fsp_get_xxx() APIs to a separate module (hob.c?) and rename them to
get_xxx() for both FSP based b
Hi Aiden,
On Wed, Jun 26, 2019 at 7:21 AM Park, Aiden wrote:
>
> - Add new board/slimbootloader directory with minimum codes
> - Add slimbootloader configuration files
> - Add README in board/slimbootloader/slimbootloader/
>
> Signed-off-by: Aiden Park
> ---
> arch/x86/Kconfig
On Wed, Jun 26, 2019 at 7:23 AM Park, Aiden wrote:
>
> The setting up MTRRs have already been done in previous
> Slim Bootloader stages.
>
> Signed-off-by: Aiden Park
> ---
> arch/x86/lib/init_helpers.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
Reviewed-by: Bin Meng
_
Hi Aiden,
On Wed, Jun 26, 2019 at 7:18 AM Park, Aiden wrote:
>
> - Get memory size from the memory map info hob
> - Set ram top for U-Boot relocation lower than 4GB
> - Provide e820 entries from the memory map info hob
>
> Signed-off-by: Aiden Park
> ---
> arch/x86/cpu/slimbootloader/Makefile
1 - 100 of 191 matches
Mail list logo