Public bug reported:
Using network printers with samba authentication on Ubuntu 20.04 the
authentication dialog is shown only a very short time and closes
unexpectedly. But authentication works with noninteractive
authentication using specifying username and password as part of the
samba address.
Public bug reported:
If eog is called to read a png file from a directory like:
eog mydirectory/picture.png
while new png images are frequently added to this directory, eog crashes
with random errors, e. g.:
(eog:4447): GLib-WARNING **: 00:00:37.123: Accessing a sequence while it is
being sor
Very important: I had to select "intel" in nvidia-settings to prevent
loading the blacklisted nvidia driver by nvidia-persistenced.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1758243
Title:
bumbl
These proposed way seems to work for me. What are the next steps to
bring it upstream?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1758243
Title:
bumblebee needs configuration changes to work with
Public bug reported:
AMT uses same MAC- and IP-address like the host network port of the
computer. MAAS seems to have a problem with that. MAAS detects all
computers that may be controlled by MAAS. Now we can configure the
machine e. g. by setting the power configuration to have AMT on a
specific
Public bug reported:
Using AMT to check power and power up computer, MAAS does not allow to
specify the username. It defaults to "admin".
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: maas 2.4.2-7034-g2f5deb8b8-0ubuntu1
ProcVersionSignature: Ubuntu 4.18.0-17.18~18.04.1-generic 4.18.20
Una
Public bug reported:
MAAS switches off computers graceless. Since Intel Haswell AMT supports
graceful power operations. MAAS should send a graceful powerdown command
to switch off the computer. It should use acpi shutdown. It should also
fallback if graceful powerdown times out or an older AMT ver
Public bug reported:
To add a local rack controller, I have to setup an ip address with "ip
addr add" for the ethernet port. I also have to run:
sudo maas-rack register --url http://192.168.2.3:5240/MAAS --secret
Normally this should be done without multiple commands. MMAS should
provide an use
Public bug reported:
If I click "add rack controller" I only see instructions to do this.
MAAS should do this for me.
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: maas 2.4.2-7034-g2f5deb8b8-0ubuntu1
ProcVersionSignature: Ubuntu 4.18.0-17.18~18.04.1-generic 4.18.20
Uname: Linux 4.18.0-17-
Public bug reported:
System was running without problems for a long time. After two weeks of
no interaction with mouse or keyboard, System did not respond on
keyboard or mouse interaction anymore. Gui works (tried with DISPLAY=:1
xmessage "test" from ssh), mouse and keyboard are also working (Fn-L
tried now nvidia 396.24, got simmilar problems
I think it does not depend on nvidia drivers. The internal display ist
connected to intel graphics. Switching nvidia gpu off does not change
anything.
** Attachment added: "screenshot graphic problems"
https://bugs.launchpad.net/ubuntu/+source/xo
Public bug reported:
after wake up from standby the screen was flickering and a window was
fallen over
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: xorg 1:7.7+13ubuntu3
ProcVersionSignature: Ubuntu 4.4.0-121.145-generic 4.4.117
Uname: Linux 4.4.0-121-generic x86_64
NonfreeKernelModules:
Public bug reported:
On Ubuntu 16.04 LTS, AMD Ryzen 7 1700, 16 GB RAM, Nvidia GTX 1050 Ti
with driver 384.111 running
watch nvidia-smi
crashes after 4 days nonstop operation with message "stack smashed"
This does NOT happen on Intel Xeon E5-2660v4, GTX 1080 Ti with Ubuntu
17.04, Nvidia driver 3
This happens also on newer versions: 52.4.0 (64-bit) There are a lot of
windows of this kind opening again and again.
** Attachment added: "Add Security exception opened many times."
https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/556998/+attachment/5005410/+files/BugThunderbirdSecu
Public bug reported:
Sometimes the PIN-Code request window opens over the session unlock
screen. The window cannot be moved. Entering PIN-Code is possible but
fails.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: network-manager 1.2.6-0ubuntu0.16.04.1
ProcVersionSignature: Ubuntu 4.4.0-97.
@LocutusOfBorg (costamagnagianfranco):
Do you use the unity desktop + nvidia bumblebee?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1704586
Title:
minimized boinc-manager window empty after boinc
7.8.1 does not change anything.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1704568
Title:
Control menu checkbox shows state one step in the past
To manage notifications about this bug go to:
htt
Does not change anything.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1704567
Title:
exit from launcher symbol undefined behavior
To manage notifications about this bug go to:
https://bugs.launch
Problem still occurs with your ppa on ubuntu. But on debian testing
everything is fine.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1704586
Title:
minimized boinc-manager window empty after boinc-
Public bug reported:
using apt dist-upgrade breaks glx. I had to:
sudo apt-get install --reinstall libgl1-mesa-glx xserver-xorg-core
after it to make optirun glxgears work with bumblebee again.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: update-manager 1:16.04.8
ProcVersionSignature:
Public bug reported:
If I connect to vpngate.hrz.tu-chemnitz.de all dhcp configuration (also
dns) are retrieved correctly, but dns is not working anymore. It worked
weeks ago. It correctly sets up resolv.conf:
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO
** Changed in: boinc (Ubuntu)
Status: Fix Released => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1704567
Title:
exit from launcher symbol undefined behavior
To manage notificati
I upgraded to the version 7.6.33 in your link. This does not fix it.
** Changed in: boinc (Ubuntu)
Status: Fix Released => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1704568
Title
Public bug reported:
On Ubuntu 16.04.2: Installing Tensorflow with pip installs a new
tensorflow pkg with old ABI (non C++11).
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: python-pip 8.1.1-2ubuntu0.4
ProcVersionSignature: Ubuntu 4.4.0-83.106-generic 4.4.70
Uname: Linux 4.4.0-83-generic x
works on ubuntu-server but not on ubuntu-desktop
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1688911
Title:
preseeding password fails
To manage notifications about this bug go to:
https://bugs.la
Public bug reported:
If network-manager stucks caused by bug #1704600, further attempts to
interact with the nm-applet gui lead to timeouts and often a
segmentation fault of nm-applet, causing the nm-applet to terminate non-
gracefully.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: networ
Public bug reported:
If a process binds 127.0.1.1:53 and the network-manager ist started, it
tries to use this port (dnsmasq). It waits until the port is available.
That means no interaction with the network-manager is possible. So
unity-control-center stucks if "Network" is clicked or the nm-appl
Public bug reported:
If I have the boinc-manager window minimized and start the boinc-client,
the boinc-manager window is completely empty (gray), no control elements
are shown. This doesn not happen, if I stop the boinc-client while the
boinc-manager is minimized. It gets also updated after resta
This may be a security problem, because also the currently running
connection is also not shown/named. It looks like wifi is inactive, but
the computer may be connected to an insecure, unencrypted or fishy
network without user knowledge.
** Summary changed:
- often now wifi connections shown
+ of
Public bug reported:
Clicking in boinc-manager "Control" ("Steuerung") menu on one menu item,
it changes the state correctly, but not the current state is shown. It
is shown one step in the past. That means it shows, what was selected,
before the last selection.
ProblemType: Bug
DistroRelease: Ub
Public bug reported:
Trying to exit boinc-manager from launcher symbol with right mouse click
-> "Exit" shows undefined behavior. Often it minimizes window and
maximizes it again. Sometimes it minimizes window without maximizing it
after. If the window is already minimized, it exits the program.
** Summary changed:
- dolphin "Properties of Filetype" ("Einstellung zum Dateityp") without function
+ dolphin "Properties of Filetype" ("Einstellungen zum Dateityp") without
function
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
h
Public bug reported:
If I click a file in dolphin, the filename is white with orange
background. If I hold the mouse cursor over it, the background is
highlighted to white, so the filename is white on white. This should not
happen. Please implement something like a colordistance constraint.
Probl
Public bug reported:
Clicking on the named/shown button doesn't do anything.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: dolphin 4:15.12.3-0ubuntu1
ProcVersionSignature: Ubuntu 4.4.0-83.106-generic 4.4.70
Uname: Linux 4.4.0-83-generic x86_64
NonfreeKernelModules: nvidia_uvm nvidia_drm n
Public bug reported:
The sort direction of dolphin detail view is wrong. Nearly all other
programs sort the large value to the large side of the arrow and the
little value to the tip of the arrow. Dolphin does it in the reverse
direction for all parameters (file name, date, size, ...).
ProblemTyp
Happens often also in Ubuntu 16.04.2, maybe in combination with standy.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to the bug report.
https://bugs.launchpad.net/bugs/32016
Title:
nm-applet shows no connections (cannot control Network Mana
Public bug reported:
On Ubuntu 16.04.2: The network-manager often does not show wifi
networks. The connection may be runningen without problems at the same
time.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: network-manager 1.2.6-0ubuntu0.16.04.1
ProcVersionSignature: Ubuntu 4.4.0-83.106-
Public bug reported:
After
sudo mount -t cifs -vvv -o credentials=~/.smbcredentials
//192.168.1.2/austausch /media/austausch
The message:
domain=mydomain
Credential formatted incorrectly: (null)
mount.cifs kernel mount options:
ip=192.168.1.2,unc=\\192.168.1.2\austausch,user=myuser,,domain=myd
Public bug reported:
On Ubuntu 16.04.2: If cifs-utils is not installed the following command
gives error messages making no sense:
sudo mount -t cifs -o credentials=~/.credentials //192.168.1.2/austausch
/media/austausch
The message is:
mount: wrong fs type, bad option, bad superblock on //192.
** Summary changed:
- ping deviation report negative number if rtt over 10 min.
+ ping deviation report negative number if rtt reaches 8 min.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1700413
Ti
Public bug reported:
On Ubuntu 16.04.2: If ping time reaches 8 min. with over 600 echo
requests on a lossy internet access, an overflow can happen resulting in
a negative mdev value.
The second bug triggered by this bug shows a minus sign after the
decimal separator.
ProblemType: Bug
DistroRelea
Public bug reported:
On Ubuntu 16.04.2: Saving attachements from a received email in
thunderbird with "Save All" button opens a dialog with missleading
"Open" button instead of "Save" button, but it saves the files
correctly.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: thunderbird 1:52.
*** This bug is a duplicate of bug 277092 ***
https://bugs.launchpad.net/bugs/277092
** Changed in: nautilus (Ubuntu)
Status: Invalid => Confirmed
** This bug has been marked a duplicate of bug 277092
Brasero 0.8.2 shows itself five times in "Open with..." on Intrepid Alpha 6
and J
Public bug reported:
On Ubuntu 16.04.2: Some apllictations are not listed in the Open With
dialog. The wine application "Irfanview" is not listed, but the wine
application "Adobe Reader 8.1" is listed correctly.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: nautilus 1:3.18.4.is.3.14.3-0ub
Same on Ubuntu 16.04.2
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/362389
Title:
Nautilus Open With shows the same program multiple times
To manage notifications about this bug go to:
https://bug
It appears again in Ubuntu 16.04.2:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/362389
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/277092
Title:
Brasero 0.8.2 shows itself five times i
Yes Okular is shown very often and many other apps too.
** Attachment added: "nautilusOpenWithAppsShownMultiple.png"
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/362389/+attachment/4895523/+files/nautilusOpenWithAppsShownMultiple.png
--
You received this bug notification because y
Public bug reported:
After opening an image and going to File -> Properties this dialog shows
nothing.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: gwenview 4:15.12.3-0ubuntu1
ProcVersionSignature: Ubuntu 4.4.0-79.100-generic 4.4.67
Uname: Linux 4.4.0-79-generic x86_64
NonfreeKernelModul
Public bug reported:
Trying to browse, selecting a directory after startup of gwenview or to
save a file the message: "URL cannot be listed" appears.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: gwenview 4:15.12.3-0ubuntu1
ProcVersionSignature: Ubuntu 4.4.0-79.100-generic 4.4.67
Uname: L
Public bug reported:
File -> open dialog on gwenview opens correctly, but there are no files
or directories listed.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: gwenview 4:15.12.3-0ubuntu1
ProcVersionSignature: Ubuntu 4.4.0-79.100-generic 4.4.67
Uname: Linux 4.4.0-79-generic x86_64
Nonfr
Public bug reported:
Error message is: "Could not start process Cannot talk to klauncher: The
name org.kde.klauncher5 was not provided by any .service files."
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: gwenview 4:15.12.3-0ubuntu1
ProcVersionSignature: Ubuntu 4.4.0-79.100-generic 4.4.67
Public bug reported:
On Ubuntu 16.04.2: winetricks is outdated - mspatcha download link was
removed by microsoft. But it is Available on alternative
mirrors/webarchives. This is solved in newest version of winetricks.
Please provide newest version via apt.
ProblemType: Bug
DistroRelease: Ubuntu 1
Public bug reported:
Affects multiple versions of Ubuntu:
"So to get Bumblebee to work properly with nvidia-370 in Ubuntu 16.04 /
Linux Mint 18.x, you'll need to install Bumblebee from THIS PPA."
http://www.webupd8.org/2016/08/how-to-install-and-configure-
bumblebee.html
The version of bumblebe
This bug happens, if screenreader is activated.
** Tags added: screenreader
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1685669
Title:
tray bar, menu bar mess up if pidgin "reconnect" is clicked
It happens more often, if screenreader was switched on and off multiple
times.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1685669
Title:
tray bar, menu bar mess up if pidgin "reconnect" is clicke
Public bug reported:
In my Lenovo W520 detected as 428449G on Ubuntu 16.04.2 (x86_64) the
color calibration is implemented wrong. It shows a little colored field
in the center of the screen, where the calibrator should be hold on.
This is not applicable for this correctly detected notebook. It has
This also affects Ubuntu (with unity). Installer window can't be
resized.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1311908
Title:
Installer on mythbuntu is too wide and cannot be resized
To ma
Public bug reported:
On Ubuntu 16.04.1 and 16.04.2 (x86_64), if I preseed:
d-i passwd/user-password password mypassword
d-i passwd/user-password-again password mypassword
d-i user-setup/allow-password-weak boolean true
The graphical installer does not show any bullets in the password
fields.
**
Public bug reported:
related to Bug #1687486
In "properties" -> "Open With" dialogue the "Default Application" list
entry can't be removed. But this entry is replicated in the "Open With"
-> "Other application..." in "Related Applications" where it can be
removed. This is synced back to "properti
Public bug reported:
On Ubuntu 16.04.2: If right-click a file clicking "Open With" -> "Other
apllication..." a list of "Related Applications" is shown. "Other
Apllications" are shown after clicking "Show all applications", but this
works only if the list contains at least one item. If it is comple
additional info: If the wrong application (PDF Mod) is listed in the
first row of the right-click menu of the pdf-file and this is row is
clicked, the application in "Default Application" (xpdf) is started.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is su
Public bug reported:
On Ubuntu 16.04.2: After installing xpdf it was not listed in the "Other
Applications" list in "properties" -> "Open With" dialogue of a file.
So this may imply that there are multiple places managing the filetype
<-> application relation.
I had "PDF Mod" set as default appl
Public bug reported:
On Ubuntu 16.04.2: right clicking a file, clicking "Open With" shows a
list of applications. This list may be inconsistant.
Removing applications in "Open With" -> "Other Applications..." does not
remove it in the mentioned list.
But Removing one application in the "properti
Public bug reported:
On Ubuntu 16.04.2: The two named dialogues are different in a senseless
way.
Clicking with the right mouse button on a file and clicking "Open With"
opens a dialogue not having "Default Application" topic. It lists the
"Default Application" added in "Related Applications" whi
Public bug reported:
On Ubuntu 16.04.2: The statemachine of the "Open With" dialogue in is
defective. To open this dialogue reightclick a file, click "properties"
and select "Open With" tab.
The behaviour of the button "Set as default" is correct. After clicking
that button, the behaviour of the
Public bug reported:
On Ubuntu 16.04.2: If I install an application using apt, it will not be
reported as installed/removeable in gnome-software/ubuntu-software.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: ubuntu-software 3.20.1+git20170208.0.a34b091-0ubuntu1~xenial1
ProcVersionSignatur
This bug is solved in Ubuntu 17.04 with systemd 232. Please solve it in
Ubuntu 16.04 LTS.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1685796
Title:
systemctl -H user@host hangs after execution
T
Public bug reported:
Ubuntu 16.04.2 (x86_64)
systemd 229
+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN
OpenSSH_7.2p2 Ubuntu-4ubuntu2.1, OpenSSL 1.0.2g 1 Mar 2016
If I execute:
systemctl -H root@127
Public bug reported:
On Ubuntu 16.04.2, unity/xenial-updates,now 7.4.0+16.04.20160906-0ubuntu1 amd64:
If I click "reconnect" on pidgin (pidgin/xenial-updates,xenial-security,now
1:2.10.12-0ubuntu5.2 amd64) the menu bar on some activ windows are show on the
window itself not in the screen top. Th
Public bug reported:
On Ubuntu 16.04.2: After triggering Bug #1684611 - Press now super + L -
The login screen is shown 4 time, one time in each workspace and the
unity launcher is blinking.
** Affects: unity (Ubuntu)
Importance: Undecided
Status: New
** Tags: login
--
You recei
Public bug reported:
On Ubuntu 16.04.2 - see image
Can be triggered by moving mouse cursor on launcher button, fast moving
curser right and down left to the next launcher button. Moving mouse
curser on the first terminal tab rerenders the tab showing it over the
tooltip.
** Affects: unity (Ubunt
Public bug reported:
On Ubuntu 16.04.2: If I click left on the dash button in the launcher
and hold down this mouse button while pressing super+s the workspace
overview opens and the dash becomes defective.
Resuming from workspace overview to one active workspace the defective
state remains: open
Public bug reported:
On Ubuntu 16.04.2: If I have multiple windows of one apllication open, I
can click the app on the Launcher and see all the windows of this app in
an overview screen. If I have the overview screen open and then i press
super+s to show the workspace overview, the Unity desktop r
Public bug reported:
On Ubuntu 16.04.2: If I click left on a window and press super+s while
holding the mousebutton, in workspace overview normal interaction with
the window is possible. Pressing alt and clicking "File' or "edit" of
the active window shows the menu in all 4 workspace at the same t
Public bug reported:
I tried all 4 variants of preseeding time/zone:
ubiquity time/zone select Europe/Berlin
ubiquity time/zone string Europe/Berlin
d-i time/zone select Europe/Berlin
d-i time/zone string Europe/Berlin
But the installed always said: "Stockholm"
** Affects: ubiquity (Ubuntu)
Public bug reported:
This is a minor name bug. If I want to start the command "docker" in
bash and docker.io is not installed, It recommends to install docker:
"sudo apt-get install docker" - This is not the right package name. The
docker command is associated with the "docker.io" package. So It
76 matches
Mail list logo
