SBFan wrote:
> Thanks for your help!, next time i go shopping for a DAC i will choose
> one that does native DSD.
I don't consider DOP vs. NATIVE the key issue. Not sure if anybody
requires more then DSD128.
The key question IMO is if the DAC is a true-DSD DAC!!
DACs like e.g. Topping D50 sup
Hi pCP Team,
This might be a question better asked in the Jivelite thread, but i
thought I'd start here first. Sorry if i'm in the wrong thread.
I have a playlist of internet radio stations set to auto start and all
is working well there, but I'd love it if the VU meter visualisations
page was the
Arh AP mode. That explains it. :cool:
I wasn't keeping track... :(
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread: http://forums.slimdevices.com/showthread.php?t=108852
_
Hi Greg,
What I've been trying to do is use a pCP in my car, so the APmode was a
god send. But, no matter if you use the LMS settings or the Tweaks, the
player will not reboot and start playing a playlist. It always looses
the previous playlist I'm assuming because it looses power from the
car.
Howard Passman wrote:
> I've thought about where to post this and I think this is the correct
> forum. I have two pCP's. One on a RPI3B and one on a RPI3B+. I don't
> think this makes any difference, but what do I know. Ill answer that.
> Nothing.
>
> On the RPI3B, using the command "pcp rand" i
jbraveman wrote:
> I have multiple pi's running picoreplayer 3.2 and have had this problem
> in the past. I'm currently trying to setup a new pi3 model B with a
> Hifiberry DAC+ with a 5v 2.5A power adapter (canakit). LMS is running on
> a dedicated windows 10 machine and player is connected via
Alright, I realize I might be being a bit of a pest here, but I thought
I would give this one more try after narrowing this down to the AP
Mode.
I won't go over the entire thing I'm trying to do, but suffice it to say
that if you are using APMode, commands from "Auto start LMS" and/or
"User comma
I appreciate the wag at it. Both are set at "Pause at power off/Resume
at power on". I have tried it the other way though.
Thanks,
Howard
kidstypike wrote:
> Just a wag, it's nothing to do with the setting at LMS > Settings >
> Player tab > your player > Power on Resume?
>
>
> 24933
--
Howard Passman wrote:
> I've thought about where to post this and I think this is the correct
> forum. I have two pCP's. One on a RPI3B and one on a RPI3B+. I don't
> think this makes any difference, but what do I know. Ill answer that.
> Nothing.
>
> On the RPI3B, using the command "pcp rand" i
I've thought about where to post this and I think this is the correct
forum. I have two pCP's. One on a RPI3B and one on a RPI3B+. I don't
think this makes any difference, but what do I know. Ill answer that.
Nothing.
On the RPI3B, using the command "pcp rand" in the tweaks page of pCP,
the playe
There is no configuration via ftp or ssh. There is a setup command
from ssh, but that is only for setting up the networking of the player.
If you can ssh in,
type
Code:
tc@piTouch:~$ cat /var/log/pcp_boot.log
and
tc@piTouch:~$ cat /usr/local/sbin/config.c
I have multiple pi's running picoreplayer 3.2 and have had this problem
in the past. I'm currently trying to setup a new pi3 model B with a
Hifiberry DAC+ with a 5v 2.5A power adapter (canakit). LMS is running on
a dedicated windows 10 machine and player is connected via ethernet.
After I flash th
I'll need to look at this in more detail when I have time. However,
remember TCP level communication is at the OS level. LMS does not send
RST - just open and close. RST are as a result of timeouts at TCP level
and implemented at driver level. Since your test system is WIndows based
and mine is
bpa wrote:
> More investigation is needed.
I tried to compare the behavior with the playback of a remote file from
the audio archive of Slovak Radio (RTVS). LMS plays back these files
without any problem and they are served by the webserver through
HTTP/1.1 as well, see the curl logs (on the lef
14 matches
Mail list logo
