You should be able to add new hosts to 3.5 cluster assuming proper 3.5
repos are used on these hosts.
Can you attach complete logs?
(engine ones and host deploy).
Regards,
Oved
On Apr 22, 2016 8:45 AM, "Sandvik Agustin" wrote:
does that mean that i have to downgrade my ovirt-engine from 3.6 to
On Apr 23, 2016 7:46 AM, "Marina Kalinin" wrote:
>
> Hi all,
>
> So far I created this solution for immediate remedy:
> https://access.redhat.com/solutions/721423
>
> I created this general RFE, that would help in our situation:
> https://bugzilla.redhat.com/show_bug.cgi?id=1329793
>
> However, th
I can confirm the problem.
Thank you!
On ven, 2016-04-22 at 15:02 +0200, Simone Tiraboschi wrote:
> On Fri, Apr 22, 2016 at 2:48 PM, Stefano Stagnaro
> wrote:
> > [root@h4 ~]# /usr/sbin/dmidecode -s system-uuid
> > Not Settable
>
> Ok, the issue is there.
> Please check you BIOS/UEFI settings.
On Fri, Apr 22, 2016 at 2:48 PM, Stefano Stagnaro
wrote:
> [root@h4 ~]# /usr/sbin/dmidecode -s system-uuid
> Not Settable
Ok, the issue is there.
Please check you BIOS/UEFI settings.
> On ven, 2016-04-22 at 14:35 +0200, Simone Tiraboschi wrote:
>> On Fri, Apr 22, 2016 at 2:26 PM, Stefano Stagnar
[root@h4 ~]# /usr/sbin/dmidecode -s system-uuid
Not Settable
On ven, 2016-04-22 at 14:35 +0200, Simone Tiraboschi wrote:
> On Fri, Apr 22, 2016 at 2:26 PM, Stefano Stagnaro
> wrote:
> > Ciao Simone,
> >
> > here it is:
> >
> > [root@h4 ~]# vdsClient -s 0 getVdsCaps
> > Traceback (most recent call
Hi,
I'm looking for the best procedure to upgrade a host from CentOS 6 to
CentOS 7. The host is the only host in the oVirt data center (the engine
is running on another machine and manages multiple data centers).
For datacenters with multiple hosts I followed the following steps:
- Add new clus
On Fri, Apr 22, 2016 at 2:26 PM, Stefano Stagnaro
wrote:
> Ciao Simone,
>
> here it is:
>
> [root@h4 ~]# vdsClient -s 0 getVdsCaps
> Traceback (most recent call last):
> File "/usr/share/vdsm/vdsClient.py", line 3001, in
> code, message = commands[command][0](commandArgs)
> File "/usr/sha
Le 22/04/2016 13:53, Nathanaël Blanchet a écrit :
Le 22/04/2016 13:49, Francesco Romani a écrit :
- Original Message -
From: "Nathanaël Blanchet"
To: "Francesco Romani"
Cc: users@ovirt.org
Sent: Friday, April 22, 2016 1:34:59 PM
Subject: Re: [ovirt-users] ssh -t serial connection
Ciao Simone,
here it is:
[root@h4 ~]# vdsClient -s 0 getVdsCaps
Traceback (most recent call last):
File "/usr/share/vdsm/vdsClient.py", line 3001, in
code, message = commands[command][0](commandArgs)
File "/usr/share/vdsm/vdsClient.py", line 542, in do_getCap
return self.ExecAndExit(
Hi Sandro,
thank you very much for the explanation.
On ven, 2016-04-22 at 13:35 +0200, Sandro Bonazzola wrote:
>
>
> On Fri, Apr 22, 2016 at 1:26 PM, Stefano Stagnaro
> wrote:
> Hi,
>
> today oVirt 3.6.5 has been released and I tried to perform a
> fresh instal
Le 22/04/2016 13:49, Francesco Romani a écrit :
- Original Message -
From: "Nathanaël Blanchet"
To: "Francesco Romani"
Cc: users@ovirt.org
Sent: Friday, April 22, 2016 1:34:59 PM
Subject: Re: [ovirt-users] ssh -t serial connection on Widows
Thank you for your answer.
Le 22/04/2016
- Original Message -
> From: "Nathanaël Blanchet"
> To: "Francesco Romani"
> Cc: users@ovirt.org
> Sent: Friday, April 22, 2016 1:34:59 PM
> Subject: Re: [ovirt-users] ssh -t serial connection on Widows
>
> Thank you for your answer.
>
> Le 22/04/2016 12:39, Francesco Romani a écrit :
>
On Fri, Apr 22, 2016 at 1:07 PM, Stefano Stagnaro
wrote:
> Hi,
>
> while deploying Hosted Engine in hyper-converged configuration, installation
> fails with following error:
> [ ERROR ] Failed to execute stage 'Environment customization': ":cannot marshal None unless allow_none is
> enabled">
On Fri, Apr 22, 2016 at 1:26 PM, Stefano Stagnaro <
stefa...@prismatelecomtesting.com> wrote:
> Hi,
>
> today oVirt 3.6.5 has been released and I tried to perform a fresh
> installation through the CentOS Virtualization SIG:
>
> # yum install centos-release-ovirt36
>
> which has installed, for dep
Thank you for your answer.
Le 22/04/2016 12:39, Francesco Romani a écrit :
- Original Message -
From: "Nathanaël Blanchet"
To: users@ovirt.org
Sent: Friday, April 22, 2016 11:26:42 AM
Subject: [ovirt-users] ssh -t serial connection on Widows
Concerning ovirt-serial connection :
ssh -
Hi,
today oVirt 3.6.5 has been released and I tried to perform a fresh installation
through the CentOS Virtualization SIG:
# yum install centos-release-ovirt36
which has installed, for dependencies, also
- centos-release-gluster37
- centos-release-virt-common
- centos-release-qemu-ev
- centos-r
Hi,
while deploying Hosted Engine in hyper-converged configuration, installation
fails with following error:
[ ERROR ] Failed to execute stage 'Environment customization': :cannot marshal None unless allow_none is enabled">
I followed Ramesh post:
http://blogs-ramesh.blogspot.it/2016/01/ovirt-a
Here is host01's broker.log:
https://gist.github.com/weeix/d73aa8506b296c27110747464ea33312/raw/e73938f4dce3591006b07e6ea61760831f4a2f18/broker.log
On 22 เมษายน 2016 15 นาฬิกา 04 นาที 40 วินาที GMT+07:00, Simone Tiraboschi
wrote:
>On Fri, Apr 22, 2016 at 9:46 AM, Simone Tiraboschi
> wrote:
>> On
- Original Message -
> From: "Nathanaël Blanchet"
> To: users@ovirt.org
> Sent: Friday, April 22, 2016 11:26:42 AM
> Subject: [ovirt-users] ssh -t serial connection on Widows
>
> Concerning ovirt-serial connection :
>
> ssh -t -p ovirt-vmconsole@engine
>
> Waiting for the closed off
I have created vms in the vmware ESXi.
Thanks,
Nagaraju
On Fri, Apr 22, 2016 at 3:38 PM, Simone Tiraboschi
wrote:
> On Fri, Apr 22, 2016 at 10:27 AM, Budur Nagaraju
> wrote:
> > HI
> >
> > I thought Its promiscuous mode issue ,after reboot of engine unable to
> reach
> > again ? is there an
On Fri, Apr 22, 2016 at 10:27 AM, Budur Nagaraju wrote:
> HI
>
> I thought Its promiscuous mode issue ,after reboot of engine unable to reach
> again ? is there anyways to resolve ?
Are you using a nested env?
> Thanks,
> Nagaraju
>
>
> On Fri, Apr 22, 2016 at 11:45 AM, Budur Nagaraju wrote:
>>
Thanks, exactly what I need!
However, I found the --all_content as an argument of "show vm" but when
I tried it nothing more happened.
Nothing could tell me at this moment that "true" was expected. It should
me more intuitive...
Le 22/04/2016 11:39, Juan Hernández a écrit :
On 04/22/2016 10:1
On 04/22/2016 10:14 AM, Nathanaël Blanchet wrote:
> Hi all,
>
> I'd like to find any vms with some defined properties like
> (console-enabled or serial_number-policy for example) with ovirt-shell
> -E "show vm name", but I can't find all information that I can get with
> edit vm popupin the UI.
Concerning ovirt-serial connection :
ssh -t -p ovirt-vmconsole@engine
Waiting for the closed officiel bash implementation on W10, does it
exist a way to do the same with putty or other ssh client?
As the spice/vnc console, could it be a good idea to get the same on the
UI so as to be OS in
Seems to be quite good!
Le 22/04/2016 00:14, Greg Sheremeta a écrit :
Hi everyone,
If you've experienced this issue and you're able to upgrade to 3.6.5,
I'd love to get your feedback on the responsiveness of the webadmin UI
now.
Best wishes,
Greg
On Sun, Apr 3, 2016 at 11:13 AM, Greg Sher
Hi all,
I'd like to find any vms with some defined properties like
(console-enabled or serial_number-policy for example) with ovirt-shell
-E "show vm name", but I can't find all information that I can get with
edit vm popupin the UI.
I belevied these kind of properties were unvailable because
HI
I thought Its promiscuous mode issue ,after reboot of engine unable to
reach again ? is there anyways to resolve ?
Thanks,
Nagaraju
On Fri, Apr 22, 2016 at 11:45 AM, Budur Nagaraju wrote:
> I found the solution ,promiscuous mode was rejecting the packets this was
> causing the issue ,enabl
On Fri, Apr 22, 2016 at 9:46 AM, Simone Tiraboschi wrote:
> On Fri, Apr 22, 2016 at 9:44 AM, Wee Sritippho wrote:
>> Hi,
>>
>> I were upgrading oVirt from 3.6.4.1 to 3.6.5. The engine-vm was running on
>> host02. These are the steps that I've done:
>>
>> 1. Set hosted engine maintenance mode to g
On Fri, Apr 22, 2016 at 9:44 AM, Wee Sritippho wrote:
> Hi,
>
> I were upgrading oVirt from 3.6.4.1 to 3.6.5. The engine-vm was running on
> host02. These are the steps that I've done:
>
> 1. Set hosted engine maintenance mode to global
> 2. Accessed engine-vm and upgraded oVirt to latest version
Hi,
I were upgrading oVirt from 3.6.4.1 to 3.6.5. The engine-vm was running
on host02. These are the steps that I've done:
1. Set hosted engine maintenance mode to global
2. Accessed engine-vm and upgraded oVirt to latest version
3. Run 'reboot' in engine-vm
4. After about 10 minutes, the engi
HI
I have configured hosted engine with two hosts ,one of the hosted engine is
down and unable to make it active .
Is there anyways to fix the issue ? I have restarted ha-agent and ha-broker
but no luck.
Thanks,
Nagaraju
___
Users mailing list
Users@ov
31 matches
Mail list logo