>
>
> -- Original Message --
> From: "Drew Moseley" mailto:d...@moseleynet.net>>
> To: "Peter Balazovic" <mailto:balazovic.pe...@gmail.com>>
> Cc: "Yocto list discussion" <mailto:yocto@yoctoproject.org>>
>
-
From: "Drew Moseley"
To: "Peter Balazovic"
Cc: "Yocto list discussion"
Sent: 5/13/2017 7:27:03 PM
Subject: Re: [yocto] dhcp eth0 network
Hi Peter,
First question, after you manually configure with ifconfig, can you
actually connect to external devices on the
et configured as
> > dhcp (no
> > static)...
> >
> >
> > -- Original Message --
> > From: "Trevor Woerner" mailto:twoer...@gmail.com>>
> > To: "Peter Balazovic" > <mailto:balazovic.pe...@gmail.com>>
; >
> >
> > -- Original Message --
> > From: "Trevor Woerner"
> > To: "Peter Balazovic"
> > Cc: "Yocto list discussion"
> > Sent: 5/12/2017 9:32:17 PM
> > Subject: Re: [yocto] dhcp eth0 network
> >
> >> H
> static)...
>
>
> -- Original Message --
> From: "Trevor Woerner"
> To: "Peter Balazovic"
> Cc: "Yocto list discussion"
> Sent: 5/12/2017 9:32:17 PM
> Subject: Re: [yocto] dhcp eth0 network
>
>> Hi Peter,
>>
>>
I build on i.mx (NXP) machine, I want to get configured as dhcp (no
static)...
-- Original Message --
From: "Trevor Woerner"
To: "Peter Balazovic"
Cc: "Yocto list discussion"
Sent: 5/12/2017 9:32:17 PM
Subject: Re: [yocto] dhcp eth0 network
Hi Pe
Hi Peter,
For what MACHINE are you building? What's your target hardware? Can
you summarize the steps you took to build your image?
What do you want eth0 to do? dhcp or static ip?
Best regards,
Trevor
On Fri, May 12, 2017 at 12:01 PM, Peter Balazovic
wrote:
> Dears,
>
> I got Yocto image
Dears,
I got Yocto image and unfortunatelly network is not somehow enabled &
proprely configured. After "ifconfig" no eth0 configured.
> ifconfig
loLink encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
> /etc/network
> ls
if-down.d if-post-down.d if-pre-up.d if-up.d
