It is do more to the lack of fiber straight up an
down the shaft. The filament winding processes used by most manufacturers have a
minimum angle they lay the fiber at approximately 20* not approaching 0* as it
should. Therefore you are depending on the resin for a great deal of the
strength in the flex direction.
llhack
|
- ShopTalk: Aldila Dean
- Re: ShopTalk: Aldila Arniesclubs
- Re: ShopTalk: Aldila Dean
- Re: ShopTalk: Aldila Volcgolf
- Re: ShopTalk: Aldila Graham Little
- Re: ShopTalk: Aldila Lloyd Hackman
- Re: ShopTalk: Aldila David Rees