|
You're welcome.
TFlan
----- Original Message -----
Sent: Friday, October 29, 2004 8:28
AM
Subject: Re: ShopTalk: senior ladies
shafts now chuck weights
tflan,
thanks very helpfull ; I wasnt really looking
forward to a trip to Home Depot armed with my gram
scale.
Jeremy
tflan wrote:
Buy a 3/8" (or metric equivalent). Take it
home. Open the package. Weigh the chuck on your gram scale. If it weighs
more than 258 grams, grind excess material from the chuck, using your bench
grinder. If it weighs less than 258 grams, add lead tape until you get the
weight. If you don't have a grinder, then use the chuck at whatever weight
it is and interpolate. If you don't have a gram scale, take the chuck to
your local post office and have them weigh it. If none of the above works,
use a 5-iron head. Shim it on woods, use it as is on irons.
Better still, use the actual head for freq.
measurements.
TFlan
-----
Original Message -----
Sent:
Thursday, October 28, 2004 5:37 AM
Subject:
Re: ShopTalk: senior ladies shafts
Arnie thanks but I thought drill
chucks.
were sold by size ie 1/4" etc (or metric up
here in Canada) I think I would get a very strange look if I
went to the hardware store and asked for a 258 gram chuck
[EMAIL PROTECTED] wrote:
In a message dated 10/27/04 10:48:09 AM Eastern
Daylight Time, [EMAIL PROTECTED] writes:
what exactly is a 258 drill
chuck?
A drill chuck that weighs 258
grams.
|
