All I did to reduce the flow is to make a hole in the airline and
then you can regulate the flow by how far you bend the aquarium air
line. a small cut with a razor does the job. you can adjust the bend
by just moving the pump or jar a bit to regulate the air flow.
V
On Oct 5, 2006, at 11:04 AM, Marshall Dudley wrote:
Most inexpensive pumps are centrifical not positive displacement
type. A
centrifical pump can be throttled very easily, since they put out a
pretty low
pressure, and are not harmed by the output being throttled or
blocked. For a
very low flow, try some of the valves they sell at pet stores for
aquariums for
the air lines, or if you are dealing with a large flow, a ball
valve from Lowes
or Home Depot would do the trick.
Marshall
Lea Ann wrote:
Ode,
Do you know which kind of store I would go to to find a valve to
control the
rate of flow?
Blessings,
Lea Ann Savage
Satellite Beach, FL
321-773-7088
www.FreeFashionJewelry.com
We have two ears and one mouth - use them proportionately!
(I'm hoping that if it's in my signature line I'll heed the
advice :-)
Philippians 4:8
----- Original Message -----
From: "Ode Coyote" <odecoy...@alltel.net>
Subject: Re: CS>Question about stirring mechanisms
That's a good idea.
And you can probably direct the flow to avoid high velocity
eddies and
use a pressure bypass loop hose and a valve to control rate of flow.
ode
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to: silver-list@eskimo.com
Address Off-Topic messages to: silver-off-topic-l...@eskimo.com
The Silver List and Off Topic List archives are currently down...
List maintainer: Mike Devour <mdev...@eskimo.com>