-----Original
Message----- I’ve built the OLYII three ways. 1. With servo in fuselage,
spoilers activated by strings as shown on plans. Spoilers seldom closed properly, and a hassle to hook up at
the field. Very inexpensive 2. Servo in fuselage. Spoilers hooked up with Very Flexible
Sullivan control cables. Works
very well, spoilers open and close in a very positive manner. Still a hassle to hookup at the field.
Slightly more expensive, but much better than option 1 (above). 3. Hitec HS80 in each wing. Hooked directly to Servo. Y harness to hook to throttle (spoiler)
channel on four channel receiver.
Works best, Easy hookup at field.
Most expensive. Hope this helps. Good Luck,
Happy New Year Jack -----Original
Message----- has anyone
built an olympic 2 with the spoiler option ? i want to add them
while i'm building the plane and was wondering if the design on the plans is
the best way to go with the servo in the fuselage . i thought it might work
better to put the servo in the wing ! any thoughts on this? |
- Re: [RCSE] spoilers in an olmpic 2 Jack Suder