I usually clean things well, use thick CA and put a piece of heat shrink over the joint. As you shrink the CA will bond the whole lot together to give a great joint.
Mark --- Phil Barnes <[EMAIL PROTECTED]> wrote: > After CAing the carbon rod into the Brass sleeve I > just cut a small square > of light fiberglass, maybe 1" square, spray it > lightly with 3M77 and wrap it > around the carbon rod/brass sleeve joint. Then just > saturate the glass with > thin CA. > > > RCSE-List facilities provided by Model Airplane > News. Send "subscribe" and "unsubscribe" requests > to [EMAIL PROTECTED] Please note that > subscribe and unsubscribe messages must be sent in > text only format with MIME turned off. Email sent > from web based email such as Hotmail and AOL are > generally NOT in text format > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format