Sounds smart and Lite...
my 2 cents
CJ
At 06:23 PM 1/1/2006, James V. Bacus wrote:
I don't know if I will do internal pushrods on my Supra or not, but
when I did it on the Ava I used a similar technique using
cottonballs and CA to make very light internal bulkheads to support
the pushrods.
At 05:14 PM 1/1/2006, [EMAIL PROTECTED] wrote:
This is long but useful info:
Well Barry, the fuse is complete and the internal pushrods are
great. Start with
the two holes into the pod lined up with the servo output arms.
Jim
Downers Grove, IL
Member of the Chicago SOAR club, and Team JR
AMA 592537 LSF 7560 Level IV R/C Soaring blog at www.jimbacus.net
RCSE-List facilities provided by Model Airplane News. Send
"subscribe" and "unsubscribe" requests to
[EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent in text only format with MIME
turned off. Email sent from web based email such as Hotmail and AOL
are generally NOT in text format
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe
messages must be sent in text only format with MIME turned off. Email sent from web based email
such as Hotmail and AOL are generally NOT in text format
