Good luck finding a Hardware Store these days... Home Depot and Lowes have run the *real* hardware stores out of business. I have yet to find exact matches. Most of the bolts are UNF 5/16 and UNF 3/8 which limits the choices and the lengths are in 1/8" increments while hardware stores will have lengths in 1/2" increments. Also, be careful with anything inside the engine. These are tempered for a high-torque and are not OTS. For generic hardware, you might try finding a fastener supply house in your area but you may end up buying by the gross.
The closest thing I have seen to a Bolt List is the Torque chart in the Bentley Shop Manual. Between it and the exploded views, you could put together a decent list with a little trial and error. I still think it's cheaper to order from Spitbits... Gene > for every nut and bolt.. but the point if this note is this: I'd like to go > to the hardware store with a list of bolt sizes, etc. example, 3/8ths by > 4 > in bolt... and fill up my basket with my complete list. Is there a 'list' > of nuts and bolts sizes, quantity, etc? *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!