He is good natured FM I don't have a problem  complying, but I did offer him 50 
bucks for copy of the code. 
Thank you,
Andy Johnston



On May 13, 2013, at 4:34 PM, "John O'Connor" <[email protected]> wrote:

> Andy,
> I have never seen anything in writing about the number of exposed threads of
> a bolt thru the nut.  However, I used to be an aircraft mechanic in the
> Navy, and we had a rule of two exposed threads.  We lived by that rule,
> where it came from we never questioned.  It worked in conditions of
> vibrations that a fire pump would never experience.  Probably came from some
> design engineer in the third basement of Boeing during WWII.  It is amazing
> how some rules get hatched and live forever, only to be expanded upon as if
> the original came down from Mt. Sinai.
> John O'Connor
> National Fire Sprinklers, Inc.
> Nashville TN
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Andy
> Sent: Monday, May 13, 2013 3:05 PM
> To: [email protected]
> Subject: Exposed threads
> 
> 
> I was told that bolts on a fire pump must have 3 threads showing on the bolt
> side I complied and then was told I must have 5 exposed threads because it
> will operate above 150 PSI I complied but I did ask were to find that. I
> love code trivia I was told its some were in the ASME codes that are
> referenced In front of NFPA 20. I do not have a copy of these. I pleats try
> to meet the FM request But.....
> 
> 
> Thank you, in advance. 
> Andy Johnston
> 
> 
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
> 
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1432 / Virus Database: 3162/5820 - Release Date: 05/13/13
> 
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

Reply via email to