On Tue, Nov 2, 2010 at 11:39 AM, Ákos Maróy <a...@maoy.hu> wrote: > my assumption now is that my ethernet interface driver, atl1c, is > broken, as it does not seem to allow re-configuring the IP address of > the ethernet interface multiple times :( > > so my assumption now is not that the camera is broken. > > > but, now that I can reach the camera, I can't seem to be able to change > the IP configuration on the camera. in the preferences page, > http://192.168.0.9/index.php?site=camerasetup/setup.php - whenever I > edit the network settings, the save button gets disabled :( > > > Akos >
Akos, Sebastian who wrote the web interface was trying to make users go through all the required fields to reduce the risk of misconfiguring the network that would require low-level reflash, not possible with just web interface (as the camera will obviously not be accessible over the network), so you need to go through all of the network settings fields in the interface - then the save button will be enabled. Andrey _______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com