2008/8/19 A r y a S e t a <[EMAIL PROTECTED]>: > >>>> Sesuai judul, adakah command untuk cek type eth? >>>> (Ethernet 802.3, 802.11, 802.5, 802.2, dll) > >>> wifi card ya mas ? >>> >>> iwconfig / iwspy > >> sori nambahin, keburu send tadi >> kalo ethernet biasa, bisa pake command mii-diag > > Ethernet biasa > > [EMAIL PROTECTED]:~$ sudo mii-diag eth0 > [sudo] password for byte: > Basic registers of MII PHY #1: 1000 7809 002b dc40 05e1 0000 0004 2001. > Basic mode control register 0x1000: Auto-negotiation enabled. > Basic mode status register 0x7809 ... 7809. > Link status: not established. > End of basic transceiver information. > > Jika outputnya seperti ini, type nya yg mana ya? > > klo wifi kan kelihatan jelas :) > > wlan0 IEEE 802.11g ESSID:"xxxx" > > > -inv- > > --
[EMAIL PROTECTED] mitranet]# mii-diag eth0 Basic registers of MII PHY #32: 1100 782d 0000 0000 01e1 45e1 0001 0000. The autonegotiated capability is 01e0. The autonegotiated media type is 100baseTx-FD. Basic mode control register 0x1100: Auto-negotiation enabled. You have link beat, and everything is working OK. Your link partner advertised 45e1: Flow-control 100baseTx-FD 100baseTx 10baseT-FD 10baseT, w/ 802.3X flow control. End of basic transceiver information. kliatane harus konek mengingat > Link status: not established. -- --------------------------------------------- bayu - mandriva - other Linux at http://bayuart.wordpress.com -- FAQ milis di http://wiki.linux.or.id/FAQ_milis_tanya-jawab Unsubscribe: kirim email ke [EMAIL PROTECTED] Arsip dan info milis selengkapnya di http://linux.or.id/milis
