Any news about this?
Should we fill a bug?
cheers,
david
On Tue, Jul 6, 2010 at 12:50 PM, Christopher Zimmermann
<madro...@zakweb.de> wrote:
> On 07/06/10 10:10, David Coppa wrote:
>> On Tue, Jul 6, 2010 at 4:14 AM, Anders Langworthy<lagrang...@gmail.com>
>> wrote:
>>> On Mon, Jul 5, 2010 at 4:37 PM, Christopher Zimmermann
>>> <madro...@zakweb.de> wrote:
>>>
>>>> The only thing I find funny is that the network link only comes
>>>> up after I have run the 'ifconfig iwi0 scan' a second time. See
>>>> below.
>>>
>>> Yeah, this is a quirk with my iwi device[1] also. A scan needs to be
>>> run after you change nwid or the network will not come up as active.
>>> It does work without a scan the first time you connect to a network
>>> after the machine has been booted, though.
>
> But not if you do a scan before bringing the inferface up for the
> first time - as in my case.
>
>>> [1]: iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05
>>>
>>>
>>
>> I think there's a probable regression with:
>>
>> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
>> pci2 at ppb1 bus 4
>
> that's what my dmesg says about this:
>
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev
> 0xd3
> pci4 at ppb3 bus 11
> iwi0 at pci4 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 11,
> address 00:12:f0:62:22:ba
>
>> I have a ralink on my ThinkPad X41 that shows the same weird behavior.
>>
>> ral0 at pci2 dev 2 function 0 "Ralink RT2561" rev 0x00: irq 10,
>> address 00:0d:f0:3e:6e:a0
>> ral0: MAC/BBP RT2561C, RF RT2527
>>
>> And the same "ifconfig scan" trick is also needed if I swap the card
>> with an Atheros minipci, so I think it's not related to a particular
>> wireless device.
>>
>> No quirks at all with another Ralink card on cardbus (MSI CB54G2)...
>> And I'm 99% sure I didn't have this problem before.
>>
>> cheers,
>> David
>
> my complete dmesg:
>
> OpenBSD 4.7-current (GENERIC) #34: Wed Jun 23 22:16:39 MDT 2010
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) M processor 2.13GHz ("GenuineIntel" 686-class)
> 2.13 GHz
> cpu0:
>
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,
MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
> real mem = 2145808384 (2046MB)
> avail mem = 2067968000 (1972MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 08/21/06, BIOS32 rev. 0 @ 0xfd760,
> SMBIOS rev. 2.33 @ 0xe0010 (64 entries)
> bios0: vendor IBM version "1YET65WW (1.29 )" date 08/21/2006
> bios0: IBM 2668H2G
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 96%
> apm0: AC on, battery charge high
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xfd6f0/0x910
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #12 is the last bus
> bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1600 0xd1800/0x1000
> 0xdc000/0x4000! 0xe0000/0x10000
> cpu0 at mainbus0: (uniprocessor)
> cpu0: Enhanced SpeedStep 2129 MHz: speeds: 2133, 1867, 1600, 1333, 1067,
800
> MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> io address conflict 0x5800/0x8
> io address conflict 0x5808/0x4
> io address conflict 0x5810/0x8
> io address conflict 0x580c/0x4
> pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
> ppb0 at pci0 dev 1 function 0 "Intel 82915GM PCIE" rev 0x03: irq 11
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI FireGL M24 GL" rev 0x80
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> radeondrm0 at vga1: irq 11
> drm0 at radeondrm0
> ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 11
> pci2 at ppb1 bus 2
> bge0 at pci2 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1
> (0x4101): irq 11, address 00:11:25:ae:0e:0c
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03: irq 11
> pci3 at ppb2 bus 3
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11
> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
> pci4 at ppb3 bus 11
> cbb0 at pci4 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11
> iwi0 at pci4 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 11,
> address 00:12:f0:62:22:ba
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 12 device 0 cacheline 0x0, lattimer 0xb0
> pcmcia0 at cardslot0
> auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 11,
ICH6
> AC97
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auich0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM
> disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <HTS541080G9AT00>
> wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 11
> iic0 at ichiic0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt2 at isa0 port 0x3bc/4: polled
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask effd netmask effd ttymask ffff
> mtrr: Pentium Pro MTRR support
> ugen0 at uhub3 port 2 "STMicroelectronics Biometric Coprocessor" rev
> 1.00/0.01 addr 2
> vscsi0 at root
> scsibus0 at vscsi0: 256 targets
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> scsibus1 at softraid0: 1 targets
> sd0 at scsibus1 targ 0 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct
fixed
> sd0: 42014MB, 512 bytes/sec, 86046306 sec total
