First off I'd like to say that today luck was with me. Big time. I went to
a local store (saturn.de) to buy a wireless usb adapter and picked one out
that I thought was supported. I did not take my netbook with me so I didn't
know if it would work or not. So when I got home it was detected as ugen0...
damn. So then I compared the USB Vendor in a list and made an educated guess
that this is a urtwn(4) device and hacked the support into the kernel and
rebooted. Then I prayed and it did configure and attach! success then I
did a ifconfig urtwn scan and it worked, success and then I read the manpage
on how to configure wireless as I've never done it on OpenBSD since 2002.
Anyhow the driver specification needs a better name I called it PJPUK for
my initials and unknown. But I can give you information about the box what
I bought: This is a ISY (simply connected) USB Wireless Micro Adapter,
IWL 4000 and claimed to be a (N300 standard). Thank you Damien Bergamini
for this driver!
Here is some relevant information:
ifconfig urtwn0
urtwn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr ec:1a:59:0d:fa:1c
priority: 4
groups: wlan egress
media: IEEE802.11 autoselect (OFDM54 mode 11g)
status: active
ieee80211: nwid AREA27 chan 11 bssid 24:65:11:68:a1:43 196dB wpakey
CENSORED wpaprotos wpa1,wpa2 wpaakms psk wpaciphers tkip,ccmp wpagroupcipher
tkip
inet6 fe80::ee1a:59ff:fe0d:fa1c%urtwn0 prefixlen 64 scopeid 0x4
inet 192.168.178.36 netmask 0xffffff00 broadcast 192.168.178.255
usbdevs -v
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), ATI(0x1002),
rev 1.00
port 1 addr 2: high speed, power 500 mA, config 1, Belkin Wireless
Adapter(0x21f2), Realtek(0x050d), rev 2.00, iSerialNumber 00e04c000001
port 2 powered
port 3 powered
port 4 powered
port 5 powered
Controller /dev/usb1:
...
The diff against a -current snapshot from last week:
Index: if_urtwn.c
===================================================================
RCS file: /cvs/src/sys/dev/usb/if_urtwn.c,v
retrieving revision 1.23
diff -u -r1.23 if_urtwn.c
--- if_urtwn.c 17 Sep 2012 15:14:14 -0000 1.23
+++ if_urtwn.c 20 Nov 2012 15:11:56 -0000
@@ -83,6 +83,7 @@
{ USB_VENDOR_AZUREWAVE, USB_PRODUCT_AZUREWAVE_RTL8188CE_2 },
{ USB_VENDOR_AZUREWAVE, USB_PRODUCT_AZUREWAVE_RTL8188CU },
{ USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_F7D2102 },
+ { USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_PJPUK },
{ USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_RTL8188CU },
{ USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_RTL8192CU },
{ USB_VENDOR_CHICONY, USB_PRODUCT_CHICONY_RTL8188CUS_1 },
Index: usbdevs
===================================================================
RCS file: /cvs/src/sys/dev/usb/usbdevs,v
retrieving revision 1.591
diff -u -r1.591 usbdevs
--- usbdevs 14 Nov 2012 16:53:49 -0000 1.591
+++ usbdevs 20 Nov 2012 15:11:59 -0000
@@ -1118,6 +1118,7 @@
product BELKIN F5U120 0x1203 F5U120-PC Hub
product BELKIN RTL8192CU 0x2102 RTL8192CU
product BELKIN F7D2102 0x2103 F7D2102
+product BELKIN PJPUK 0x21f2 PJPUK
product BELKIN ZD1211B 0x4050 ZD1211B
product BELKIN F5D5055 0x5055 F5D5055
product BELKIN F5D7050 0x7050 F5D7050 54g USB Network Adapter
and last but not least a dmesg:
OpenBSD 5.2-current (SATURN) #1: Tue Nov 20 15:57:38 CET 2012
p...@saturn.centroid.eu:/usr/src/sys/arch/amd64/compile/SATURN
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4003721216 (3818MB)
avail mem = 3874660352 (3695MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe3e70 (51 entries)
bios0: vendor Acer version "V1.08" date 12/06/2011
bios0: Acer AO722
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT SSDT
acpi0: wakeup devices SPB2(S4) GEC_(S4) USB0(S3) USB4(S3) P2P_(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD C-60 APU with Radeon(tm) HD Graphics, 998.31 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD C-60 APU with Radeon(tm) HD Graphics, 997.51 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line
16-way L2 cache
cpu1: 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB2_)
acpiprt2 at acpi0: bus -1 (PB3_)
acpiprt3 at acpi0: bus -1 (PB4_)
acpiprt4 at acpi0: bus -1 (PB5_)
acpiprt5 at acpi0: bus -1 (PB6_)
acpiprt6 at acpi0: bus -1 (PB7_)
acpiprt7 at acpi0: bus 2 (SPB0)
acpiprt8 at acpi0: bus -1 (SPB1)
acpiprt9 at acpi0: bus 6 (SPB2)
acpiprt10 at acpi0: bus 7 (SPB3)
acpiprt11 at acpi0: bus 1 (P2P_)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, PSS
acpicpu1 at acpi0: C2, PSS
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT1 model "13848633228217409" serial 417d type Lion oem
"Sanyo "
acpiac0 at acpi0: AC unit offline
acpibtn2 at acpi0: LID_
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: VGA_
acpivideo2 at acpi0: VGA_
cpu0: 998 MHz: speeds: 1000 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
vga1 at pci0 dev 1 function 0 vendor "ATI", unknown product 0x9807 rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI
1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD3200BPVT-2, 01.0> SCSI3 0/direct
fixed naa.50014ee25be3a7df
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 4 int 16
azalia1: codecs: Conexant/0x506c
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb0 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci1 at ppb0 bus 1
ppb1 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00
pci3 at ppb2 bus 6
alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address
dc:0e:a1:54:ba:16
atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 5
ppb3 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00
pci4 at ppb3 bus 7
"Atheros AR9485" rev 0x01 at pci4 dev 0 function 0 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
urtwn0 at uhub0 port 1 "Realtek Belkin Wireless Adapter" rev 2.00/2.00 addr 2
urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R, address ec:1a:59:0d:fa:1c
uvideo0 at uhub1 port 1 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. WebCam" rev 2.00/82.57 addr 2
video0 at uvideo0
umass0 at uhub1 port 2 configuration 1 interface 0 "Generic USB2.0-CRW" rev
2.00/38.82 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct
removable serial.0bda0138516388200000
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (b7929eff445098b7.a) swap on sd0b dump on sd0b
