Dear Tech, i have a ENDAT 7703 motherboard near my desk, the manual point out some instruction to configure the watchdog :
//init, select the destination of command... outportb(0x2e,0x87); outportb(0x2e,0x87); outportb(0x2e,0x07); outportb(0x2f,0x08); //com outportb(0x2e,0x30); //main outportb(0x2f,0x01); //0 to inactive outportb(0x2e,0xf2); //reset param outportb(0x2f,0x00); // bit 6 keyboard, bit 7 mouse outportb(0x2e,0xf0); //time unit conf outportb(0x2f,0x04); // bit3 = 1 minutes outportb(0x2e,0xf1); // how much time outportb(0x2f,1); // 1 minute I suppose only the kernel can write to the 0x2e and 0x2f address ? Usually watchdog are detected and shown in dmesg, have i to ask more detail to the supplier ? Best regards, -- --------------------------------------------------------------------------------------------------------------------- () ascii ribbon campaign - against html e-mail /\