DaveKen;614714 Wrote: > Hi Phil, > Thanks for that but, having bought 3 differing sets of jacks from > Maplins, a total of 24, none of which fit the touch, can I ask if you > KNOW from first hand experience that that item will fit. Several of the > ones I've tried had the same OD and length but it seemed (to me) that > the 'pin' in the Touch that fits into the ID of the jack plug is the > problem. > I think that for some reason known only to Logitech they have made the > fitting non-standard. I say this because I had my first Touch replaced > by Logitech under warranty (without any query, which surprised me) > because the jack plug on that one was a very loose fit such that any > movement of the Touch or the other connecting cables immediately > resulted in the Touch losing power. > Thanks for any help. > Dave.
I've been building/repairing stuff for 40 years. The only odd thing about the Touch connector is that it uses a 2.5mm pin rather than the 2.1mm pin we are more used to in the UK... -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - Audiolense 3.3/2.0+INGUZ DRC - MF x-dacv3/x-10/x-psu(Audiocom full mods) - Linn 5103 - full Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters, Blue Jeans Belden Digital,Kimber 8TC Speaker & Chord Signature Plus Interconnect cables Stax4070+SRM7/II phones Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything. ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=86001 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch