On 13 April 2017 at 19:11, Wenyou Yang <wenyou.y...@atmel.com> wrote:
> The device tree source files of at91sam9g20ek and at91sam9260ek
> boards are copied from the Linux v4.10, do the changes below.
> - Fix the build error for the usb0 node.
> - Add the reg property for the pinctrl node.
> - Move the gpio (pioA, pioB, pioC ...) nodes as the pinctrl's
> slibling nodes, instead of the child nodes.
> - Add the "u-boot,dm-pre-reloc" property for the dbgu node are used
> in board_init_f stage.
> - Add the clk pinctrl of the mmc0 node.
> - Fix the compilation warnings.
>
> Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com>
> ---
>
> Changes in v2: None
>
> arch/arm/dts/Makefile | 5 +
> arch/arm/dts/at91sam9260.dtsi | 149 ++++++++++++----------
> arch/arm/dts/at91sam9260ek.dts | 215 +++++++++++++++++++++++++++++++
> arch/arm/dts/at91sam9g20.dtsi | 4 +-
> arch/arm/dts/at91sam9g20ek.dts | 29 +++++
> arch/arm/dts/at91sam9g20ek_2mmc.dts | 56 ++++++++
> arch/arm/dts/at91sam9g20ek_common.dtsi | 227
> +++++++++++++++++++++++++++++++++
> 7 files changed, 617 insertions(+), 68 deletions(-)
> create mode 100644 arch/arm/dts/at91sam9260ek.dts
> create mode 100644 arch/arm/dts/at91sam9g20ek.dts
> create mode 100644 arch/arm/dts/at91sam9g20ek_2mmc.dts
> create mode 100644 arch/arm/dts/at91sam9g20ek_common.dtsi
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot