čt 16. 4. 2020 v 14:22 odesílatel Michal Simek <michal.si...@xilinx.com> napsal: > > From: T Karthik Reddy <t.karthik.re...@xilinx.com> > > Add memory-controller@e000e000 node in zynq-ces-nand.dts as > zynq_nand driver utilizes flash@e1000000 node. Without this > dt node mini nand u-boot does not probe. > > Signed-off-by: T Karthik Reddy <t.karthik.re...@xilinx.com> > Signed-off-by: Michal Simek <michal.si...@xilinx.com> > --- > > arch/arm/dts/zynq-cse-nand.dts | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm/dts/zynq-cse-nand.dts b/arch/arm/dts/zynq-cse-nand.dts > index 1e16d7fab97d..32cb3bffcb94 100644 > --- a/arch/arm/dts/zynq-cse-nand.dts > +++ b/arch/arm/dts/zynq-cse-nand.dts > @@ -38,6 +38,21 @@ > #size-cells = <1>; > ranges; > > + smcc: memory-controller@e000e000 { > + #address-cells = <1>; > + #size-cells = <1>; > + clock-names = "memclk", "apb_pclk"; > + clocks = <&clkc 11>, <&clkc 44>; > + compatible = "arm,pl353-smc-r2p1", "arm,primecell"; > + ranges; > + reg = <0xe000e000 0x1000>; > + > + nand0: flash@e1000000 { > + compatible = "arm,pl353-nand-r2p1"; > + reg = <0xe1000000 0x1000000>; > + }; > + }; > + > slcr: slcr@f8000000 { > u-boot,dm-pre-reloc; > #address-cells = <1>; > -- > 2.26.0 >
Applied. M -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs