You have been subscribed to a public bug:
I am trying to configure 3 monitors as such:
Monitor 1: Samsung SyncMaster 2494HM using HDMI on monitor to HDMI on system.
Monitor 2: HP 2511x using HDMI on Monitor to DisplayPort on System.
Monitor 3: Viewsonic 2450WM-LED DVI to DVI on system.
I was able to get Monitor 1 and Monitor 2 setup as dual monitor setup
and works correctly. Display utility is able to recognize the Monitor 3,
but when I flip the sw switch on Display utility from off to on and hit
apply I get the following error, and I am not able to use the Monitor 3,
but only Monitor 1&2.
The selected configuration for displays could not be applied
could not assign CRTCs to outputs:
Trying modes for CRTC 63
CRTC 63: trying mode 1920x1080@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1600x1200@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1680x1050@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1400x1050@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1600x900@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1280x1024@75Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1280x1024@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1440x900@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1280x960@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1152x864@75Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1024x768@75Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1024x768@70Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1024x768@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 832x624@75Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 800x600@72Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 800x600@75Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 800x600@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 800x600@56Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 640x480@73Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 640x480@75Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 640x480@67Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 640x480@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 720x400@70Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1920x1080@60Hz with output at 1920x1080@0Hz (pass 1)
could not assign CRTCs to outputs:
Trying modes for CRTC 63
CRTC 63: trying mode 1920x1080@60Hz with output at 1920x1080@60Hz (pass 0)
output HDMI2 does not have the same parameters as another cloned output:
existing mode = 72, new mode = 72
existing coordinates = (3840, 0), new coordinates = (1920, 0)
existing rotation = normal, new rotation = normal
CRTC 63: trying mode 1680x1050@60Hz with output at 1920x1080@60Hz (pass 0)
CRTC 63: trying mode 1280x1024@60Hz with output at 1920x1080@60Hz (pass 0)
CRTC 63: trying mode 1440x900@60Hz with output at 1920x1080@60Hz (pass 0)
CRTC 63: trying mode 1280x720@60Hz with output at 1920x1080@60Hz (pass 0)
CRTC 63: trying mode 1024x768@60Hz with output at 1920x1080@60Hz (pass 0)
CRTC 63: trying mode 800x600@60Hz with output at 1920x1080@60Hz (pass 0)
CRTC 63: trying mode 640x480@60Hz with output at 1920x1080@60Hz (pass 0)
CRTC 63: trying mode 720x400@70Hz with output at 1920x1080@60Hz (pass 0)
CRTC 63: trying mode 1920x1080@60Hz with output at 1920x1080@60Hz (pass 1)
output HDMI2 does not have the same parameters as another cloned output:
existing mode = 72, new mode = 72
existing coordinates = (3840, 0), new coordinates = (1920, 0)
existing rotation = normal, new rotation = normal
CRTC 63: trying mode 1680x1050@60Hz with output at 1920x1080@60Hz (pass 1)
CRTC 63: trying mode 1280x1024@60Hz with output at 1920x1080@60Hz (pass 1)
CRTC 63: trying mode 1440x900@60Hz with output at 1920x1080@60Hz (pass 1)
CRTC 63: trying mode 1280x720@60Hz with output at 1920x1080@60Hz (pass 1)
CRTC 63: trying mode 1024x768@60Hz with output at 1920x1080@60Hz (pass 1)
CRTC 63: trying mode 800x600@60Hz with output at 1920x1080@60Hz (pass 1)
CRTC 63: trying mode 640x480@60Hz with output at 1920x1080@60Hz (pass 1)
CRTC 63: trying mode 720x400@70Hz with output at 1920x1080@60Hz (pass 1)
Trying modes for CRTC 64
CRTC 64: trying mode 1920x1080@60Hz with output at 1920x1080@60Hz (pass 0)
could not assign CRTCs to outputs:
Trying modes for CRTC 63
Failed to apply configuration: %s
GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._gnome_2drr_2derror_2dquark.Code4:
could not assign CRTCs to outputs:
Trying modes for CRTC 63
CRTC 63: trying mode 1920x1080@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1600x1200@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1680x1050@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1400x1050@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1600x900@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1280x1024@75Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1280x1024@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1440x900@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1280x960@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1152x864@75Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1024x768@75Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1024x768@70Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1024x768@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 832x624@75Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 800x600@72Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 800x600@75Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 800x600@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 800x600@56Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 640x480@73Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 640x480@75Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 640x480@67Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 640x480@60Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 720x400@70Hz with output at 1920x1080@0Hz (pass 0)
CRTC 63: trying mode 1920x1080@60Hz with output at 1920x1080@0Hz (pass 1)
could not assign CRTCs to outputs:
Trying modes for CRTC 63
CRTC 63: trying mode 1920x1080@60Hz with output at 1920x1080@60Hz (pass 0)
output HDMI2 does not have the same parameters as another cloned output:
existing mode = 72, new mode = 72
existing coordinates = (3840, 0), new coordinates = (1920, 0)
existing rotation = normal, new rotation = normal
CRTC 63: trying mode 1680x1050@60Hz with output at 1920x1080@60Hz (pass 0)
CRTC 63: trying mode 1280x1024@60Hz with output at 1920x1080@60Hz (pass 0)
CRTC 63: trying mode 1440x900@60Hz with output at 1920x1080@60Hz (pass 0)
CRTC 63: trying mode 1280x720@60Hz with output at 1920x1080@60Hz (pass 0)
CRTC 63: trying mode 1024x768@60Hz with output at 1920x1080@60Hz (pass 0)
CRTC 63: trying mode 800x600@60Hz with output at 1920x1080@60Hz (pass 0)
CRTC 63: trying mode 640x480@60Hz with output at 1920x1080@60Hz (pass 0)
CRTC 63: trying mode 720x400@70Hz with output at 1920x1080@60Hz (pass 0)
CRTC 63: trying mode 1920x1080@60Hz with output at 1920x1080@60Hz (pass 1)
output HDMI2 does not have the same parameters as another cloned output:
existing mode = 72, new mode = 72
existing coordinates = (3840, 0), new coordinates = (1920, 0)
existing rotation = normal, new rotation = normal
CRTC 63: trying mode 1680x1050@60Hz with output at 1920x1080@60Hz (pass 1)
CRTC 63: trying mode 1280x1024@60Hz with output at 1920x1080@60Hz (pass 1)
CRTC 63: trying mode 1440x900@60Hz with output at 1920x1080@60Hz (pass 1)
CRTC 63: trying mode 1280x720@60Hz with output at 1920x1080@60Hz (pass 1)
CRTC 63: trying mode 1024x768@60Hz with output at 1920x1080@60Hz (pass 1)
CRTC 63: trying mode 800x600@60Hz with output at 1920x1080@60Hz (pass 1)
CRTC 63: trying mode 640x480@60Hz with output at 1920x1080@60Hz (pass 1)
CRTC 63: trying mode 720x400@70Hz with output at 1920x1080@60Hz (pass 1)
Trying modes for CRTC 64
CRTC 64: trying mode 1920x1080@60Hz with output at 1920x1080@60Hz (pass 0)
could not assign CRTCs to outputs:
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: unity 5.10.0-0ubuntu3
ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14
Uname: Linux 3.2.0-23-generic x86_64
.tmp.unity.support.test.0:
ApportVersion: 2.0.1-0ubuntu3
Architecture: amd64
CompizPlugins:
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell]
CompositorRunning: compiz
Date: Sat Apr 14 16:07:40 2012
DistUpgraded: Fresh install
DistroCodename: precise
DistroVariant: ubuntu
EcryptfsInUse: Yes
GraphicsCard:
Intel Corporation 2nd Generation Core Processor Family Integrated Graphics
Controller [8086:0102] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:201c]
InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Beta amd64 (20120412)
ProcEnviron:
TERM=xterm
PATH=(custom, user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic
root=UUID=36f41b3a-2d58-4571-8341-1cb60029ac82 ro quiet splash vt.handoff=7
SourcePackage: unity
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 11/07/2011
dmi.bios.vendor: Intel Corp.
dmi.bios.version: BCZ6810H.86A.0028.2011.1107.0958
dmi.board.asset.tag: To be filled by O.E.M.
dmi.board.name: DZ68BC
dmi.board.vendor: Intel Corporation
dmi.board.version: AAG30742-402
dmi.chassis.type: 3
dmi.modalias:
dmi:bvnIntelCorp.:bvrBCZ6810H.86A.0028.2011.1107.0958:bd11/07/2011:svn:pn:pvr:rvnIntelCorporation:rnDZ68BC:rvrAAG30742-402:cvn:ct3:cvr:
version.compiz: compiz 1:0.9.7.6-0ubuntu1
version.ia32-libs: ia32-libs N/A
version.libdrm2: libdrm2 2.4.32-1ubuntu1
version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.2-0ubuntu3
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.2-0ubuntu3
version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1
version.xserver-xorg-video-ati: xserver-xorg-video-ati
1:6.14.99~git20111219.aacbd629-0ubuntu2
version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau
1:0.0.16+git20111201+b5534a1-1build2
** Affects: xorg-server (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug compiz-0.9 precise ubuntu
--
[12.04] [Unity] DP<>HDMI + HDMI + DVI monitor, DVI monitor unable to configure.
https://bugs.launchpad.net/bugs/981903
You received this bug notification because you are a member of Ubuntu-X, which
is subscribed to xorg-server in Ubuntu.
_______________________________________________
Mailing list: https://launchpad.net/~ubuntu-x-swat
Post to : ubuntu-x-swat@lists.launchpad.net
Unsubscribe : https://launchpad.net/~ubuntu-x-swat
More help : https://help.launchpad.net/ListHelp
