Paul Webster wrote: 
> You could check to see if they are discovered as a USB device during the
> boot phase.
> For example - from SSH session
> dmesg | grep -i usb
> 
> or from the web UI in Beta mode - go to the Diagnostics page and look
> for dmesg and the scroll through that (or Copy/Paste into a text editor
> and search it for "usb" without quotes)

The ssh reports that it's there. But I'm not sure what to do next. Which
if any of the Audio output device settings should I select? Details
pasted below. Should mention that the Pi2 also has a memory stick and
usb bluetooth attached.

[    0.000000] Kernel command line: bcm2708_fb.fbwidth=656
bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1
vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 
tz=GMT0BST,M3.5.0/1,M10.5.0 dwc_otg.fiq_fsm_mask=0xF host=piCorePlayer
dwc_otg.lpm_enable=0 console=tty1 root=/dev/ram0 elevator=deadline
rootwait quiet nortc loglevel=3 noembed smsc95xx.turbo_mode=N noswap
consoleblank=0 waitusb=2
[    0.055644] usbcore: registered new interface driver usbfs
[    0.055693] usbcore: registered new interface driver hub
[    0.055803] usbcore: registered new device driver usb
[    0.492800] usbcore: registered new interface driver lan78xx
[    0.492860] usbcore: registered new interface driver smsc95xx
[    0.520772] dwc_otg 3f980000.usb: base=0xf0980000
[    0.921924] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.921957] dwc_otg 3f980000.usb: new USB bus registered, assigned
bus number 1
[    0.921991] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    0.922253] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[    0.922262] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    0.922269] usb usb1: Product: DWC OTG Controller
[    0.922275] usb usb1: Manufacturer: Linux 4.14.81-pcpCore_v7
dwc_otg_hcd
[    0.922281] usb usb1: SerialNumber: 3f980000.usb
[    0.922897] hub 1-0:1.0: USB hub found
[    0.923715] usbcore: registered new interface driver usb-storage
[    0.927053] usbcore: registered new interface driver usbhid
[    0.927057] usbhid: USB HID core driver
[    1.371750] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.612126] usb 1-1: New USB device found, idVendor=0424,
idProduct=9514
[    1.612142] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[    1.612868] hub 1-1:1.0: USB hub found
[    1.931790] usb 1-1.1: new high-speed USB device number 3 using
dwc_otg
[    2.061926] usb 1-1.1: New USB device found, idVendor=0424,
idProduct=ec00
[    2.061941] usb 1-1.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[    2.154846] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at
usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:24:8c:30
[    2.251678] usb 1-1.4: new high-speed USB device number 4 using
dwc_otg
[    2.382185] usb 1-1.4: New USB device found, idVendor=0781,
idProduct=5571
[    2.382195] usb 1-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[    2.382202] usb 1-1.4: Product: Cruzer Fit
[    2.382208] usb 1-1.4: Manufacturer: SanDisk
[    2.382215] usb 1-1.4: SerialNumber: 4C530101230213104272
[    2.382901] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[    2.384327] scsi host0: usb-storage 1-1.4:1.0
[    2.481680] usb 1-1.5: new full-speed USB device number 5 using
dwc_otg
[    2.629184] usb 1-1.5: New USB device found, idVendor=0a5c,
idProduct=21e8
[    2.629194] usb 1-1.5: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[    2.629201] usb 1-1.5: Product: BCM20702A0
[    2.629207] usb 1-1.5: Manufacturer: Broadcom Corp
[    2.629213] usb 1-1.5: SerialNumber: 000272CC9CD2
[    2.931678] usb 1-1.2: new full-speed USB device number 6 using
dwc_otg
[    3.072936] usb 1-1.2: New USB device found, idVendor=210a,
idProduct=a410
[    3.072946] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[    3.072953] usb 1-1.2: Product: PAAD cubik      
[    3.072959] usb 1-1.2: Manufacturer: PAAD cubik      
[    3.078794] input: PAAD cubik       PAAD cubik       as
/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:210A:A410.0001/input/input0
[    3.141922] hid-generic 0003:210A:A410.0001: input,hidraw0: USB HID
v1.00 Device [PAAD cubik       PAAD cubik      ] on
usb-3f980000.usb-1.2/input2
[   14.587801] usbcore: registered new interface driver snd-usb-audio
[   14.589679] usbcore: registered new interface driver btusb


------------------------------------------------------------------------
pettifoggery's Profile: http://forums.slimdevices.com/member.php?userid=69041
View this thread: http://forums.slimdevices.com/showthread.php?t=105997

_______________________________________________
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix

Reply via email to