2025/02/23 17:00:00 - Ejecutor.hpl - Using run configuration [local]
2025/02/23 17:00:00 - Ejecutor - nr of transforms to run : 2  , nr of hops : 1
2025/02/23 17:00:00 - Ejecutor - Executing this pipeline using the Local Pipeline Engine with run configuration 'local'
2025/02/23 17:00:00 - Ejecutor - Not running a unit test...
2025/02/23 17:00:00 - Ejecutor - Execution started for pipeline [Ejecutor]
2025/02/23 17:00:00 - Ejecutor - I found 2 different transforms to launch.
2025/02/23 17:00:00 - Ejecutor - Allocating rowsets...
2025/02/23 17:00:00 - Ejecutor -  Allocating rowsets for transform 0 --> Get rows from result
2025/02/23 17:00:00 - Ejecutor -   prevcopies = 1, nextcopies=1
2025/02/23 17:00:00 - Ejecutor - Pipeline allocated new rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:00 - Ejecutor -  Allocated 1 rowsets for transform 0 --> Get rows from result  
2025/02/23 17:00:00 - Ejecutor -  Allocating rowsets for transform 1 --> MoveryBorrar.hwf
2025/02/23 17:00:00 - Ejecutor -  Allocated 1 rowsets for transform 1 --> MoveryBorrar.hwf  
2025/02/23 17:00:00 - Ejecutor - Allocating Transforms & TransformData...
2025/02/23 17:00:00 - Ejecutor -  Pipeline is about to allocate transform [Get rows from result] of type [RowsFromResult]
2025/02/23 17:00:00 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:00 - Get rows from result.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:00 - Get rows from result.0 - Transform info: nrinput=0 nroutput=1
2025/02/23 17:00:00 - Get rows from result.0 - output rel. is 1:1
2025/02/23 17:00:00 - Get rows from result.0 - Found output rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:00 - Get rows from result.0 - Finished dispatching
2025/02/23 17:00:00 - Ejecutor -  Pipeline has allocated a new transform: [Get rows from result].0
2025/02/23 17:00:00 - Ejecutor -  Pipeline is about to allocate transform [MoveryBorrar.hwf] of type [WorkflowExecutor]
2025/02/23 17:00:00 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Transform info: nrinput=1 nroutput=0
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Got previous transform from [MoveryBorrar.hwf] #0 --> Get rows from result
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - input rel is 1:1
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Found input rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Finished dispatching
2025/02/23 17:00:00 - Ejecutor -  Pipeline has allocated a new transform: [MoveryBorrar.hwf].0
2025/02/23 17:00:00 - Ejecutor - Initialising 2 transforms...
2025/02/23 17:00:00 - Ejecutor - Transform [Get rows from result.0] initialized flawlessly.
2025/02/23 17:00:00 - Ejecutor - Transform [MoveryBorrar.hwf.0] initialized flawlessly.
2025/02/23 17:00:00 - Ejecutor - Data Set enabled? false
2025/02/23 17:00:00 - Ejecutor - Pipeline has allocated 2 threads and 1 rowsets.
2025/02/23 17:00:00 - Get rows from result.0 - Starting to run...
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Starting to run...
2025/02/23 17:00:00 - Get rows from result.0 - Signaling 'output done' to 1 output rowsets.
2025/02/23 17:00:00 - Get rows from result.0 - Finished processing (I=0, O=0, R=1, W=1, U=0, E=0)
2025/02/23 17:00:00 - MoveryBorrar - Start of workflow execution
2025/02/23 17:00:00 - MoveryBorrar - Set debug level information on workflow : MoveryBorrar
2025/02/23 17:00:00 - MoveryBorrar - Found debug level info for workflow actions : [Script Mover]
2025/02/23 17:00:00 - MoveryBorrar - exec(0, 0, Start)
2025/02/23 17:00:00 - Start - Starting action
2025/02/23 17:00:00 - MoveryBorrar - Starting action [Mover Archivos]
2025/02/23 17:00:00 - MoveryBorrar - exec(1, 0, Mover Archivos)
2025/02/23 17:00:00 - Mover Archivos - Starting action
2025/02/23 17:00:00 - Mover Archivos - Found 1 previous result rows
2025/02/23 17:00:00 - Mover Archivos - Running on platform : Linux
2025/02/23 17:00:00 - Mover Archivos - Executing command : /tmp/hop_fb5defba-07c9-40ff-baf8-0b7f15b59fd4shell
2025/02/23 17:00:00 - Mover Archivos - ERROR: (stderr) cp: falta el operando archivo de destino después de '/media/tawa/LM21.3_2/Backup/Scribus/////'
2025/02/23 17:00:00 - Mover Archivos - ERROR: (stderr) Pruebe 'cp --help' para más información.
2025/02/23 17:00:00 - Mover Archivos - Command /tmp/hop_fb5defba-07c9-40ff-baf8-0b7f15b59fd4shell has finished
2025/02/23 17:00:00 - Mover Archivos - Exit status of shell [null] was 1
2025/02/23 17:00:00 - MoveryBorrar - Finished action [Mover Archivos] (result=[false])
2025/02/23 17:00:00 - MoveryBorrar - Workflow execution finished
2025/02/23 17:00:00 - MoveryBorrar - Workflow duration : 0.048 seconds [  0.048" ]
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Signaling 'output done' to 0 output rowsets.
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Finished processing (I=0, O=0, R=1, W=0, U=0, E=0)
2025/02/23 17:00:00 - Ejecutor - Pipeline duration : 0.103 seconds [  0.103" ]
2025/02/23 17:00:00 - Ejecutor - Execution finished on a local pipeline engine with run configuration 'local'
2025/02/23 17:00:00 - Ejecutor.hpl - Using run configuration [local]
2025/02/23 17:00:00 - Ejecutor - nr of transforms to run : 2  , nr of hops : 1
2025/02/23 17:00:00 - Ejecutor - Executing this pipeline using the Local Pipeline Engine with run configuration 'local'
2025/02/23 17:00:00 - Ejecutor - Not running a unit test...
2025/02/23 17:00:00 - Ejecutor - Execution started for pipeline [Ejecutor]
2025/02/23 17:00:00 - Ejecutor - I found 2 different transforms to launch.
2025/02/23 17:00:00 - Ejecutor - Allocating rowsets...
2025/02/23 17:00:00 - Ejecutor -  Allocating rowsets for transform 0 --> Get rows from result
2025/02/23 17:00:00 - Ejecutor -   prevcopies = 1, nextcopies=1
2025/02/23 17:00:00 - Ejecutor - Pipeline allocated new rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:00 - Ejecutor -  Allocated 1 rowsets for transform 0 --> Get rows from result  
2025/02/23 17:00:00 - Ejecutor -  Allocating rowsets for transform 1 --> MoveryBorrar.hwf
2025/02/23 17:00:00 - Ejecutor -  Allocated 1 rowsets for transform 1 --> MoveryBorrar.hwf  
2025/02/23 17:00:00 - Ejecutor - Allocating Transforms & TransformData...
2025/02/23 17:00:00 - Ejecutor -  Pipeline is about to allocate transform [Get rows from result] of type [RowsFromResult]
2025/02/23 17:00:00 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:00 - Get rows from result.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:00 - Get rows from result.0 - Transform info: nrinput=0 nroutput=1
2025/02/23 17:00:00 - Get rows from result.0 - output rel. is 1:1
2025/02/23 17:00:00 - Get rows from result.0 - Found output rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:00 - Get rows from result.0 - Finished dispatching
2025/02/23 17:00:00 - Ejecutor -  Pipeline has allocated a new transform: [Get rows from result].0
2025/02/23 17:00:00 - Ejecutor -  Pipeline is about to allocate transform [MoveryBorrar.hwf] of type [WorkflowExecutor]
2025/02/23 17:00:00 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Transform info: nrinput=1 nroutput=0
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Got previous transform from [MoveryBorrar.hwf] #0 --> Get rows from result
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - input rel is 1:1
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Found input rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Finished dispatching
2025/02/23 17:00:00 - Ejecutor -  Pipeline has allocated a new transform: [MoveryBorrar.hwf].0
2025/02/23 17:00:00 - Ejecutor - Initialising 2 transforms...
2025/02/23 17:00:00 - Ejecutor - Transform [Get rows from result.0] initialized flawlessly.
2025/02/23 17:00:00 - Ejecutor - Transform [MoveryBorrar.hwf.0] initialized flawlessly.
2025/02/23 17:00:00 - Ejecutor - Data Set enabled? false
2025/02/23 17:00:00 - Get rows from result.0 - Starting to run...
2025/02/23 17:00:00 - Ejecutor - Pipeline has allocated 2 threads and 1 rowsets.
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Starting to run...
2025/02/23 17:00:00 - Get rows from result.0 - Signaling 'output done' to 1 output rowsets.
2025/02/23 17:00:00 - Get rows from result.0 - Finished processing (I=0, O=0, R=1, W=1, U=0, E=0)
2025/02/23 17:00:00 - MoveryBorrar - Start of workflow execution
2025/02/23 17:00:00 - MoveryBorrar - Set debug level information on workflow : MoveryBorrar
2025/02/23 17:00:00 - MoveryBorrar - Found debug level info for workflow actions : [Script Mover]
2025/02/23 17:00:00 - MoveryBorrar - exec(0, 0, Start)
2025/02/23 17:00:00 - Start - Starting action
2025/02/23 17:00:00 - MoveryBorrar - Starting action [Mover Archivos]
2025/02/23 17:00:00 - MoveryBorrar - exec(1, 0, Mover Archivos)
2025/02/23 17:00:00 - Mover Archivos - Starting action
2025/02/23 17:00:00 - Mover Archivos - Found 1 previous result rows
2025/02/23 17:00:00 - Mover Archivos - Running on platform : Linux
2025/02/23 17:00:00 - Mover Archivos - Executing command : /tmp/hop_2882ffa1-093a-49d9-a13b-3b78e0416ee5shell
2025/02/23 17:00:00 - Mover Archivos - ERROR: (stderr) cp: falta el operando archivo de destino después de '/media/tawa/LM21.3_2/Backup/Scribus/////'
2025/02/23 17:00:00 - Mover Archivos - ERROR: (stderr) Pruebe 'cp --help' para más información.
2025/02/23 17:00:00 - Mover Archivos - Command /tmp/hop_2882ffa1-093a-49d9-a13b-3b78e0416ee5shell has finished
2025/02/23 17:00:00 - Mover Archivos - Exit status of shell [null] was 1
2025/02/23 17:00:00 - MoveryBorrar - Finished action [Mover Archivos] (result=[false])
2025/02/23 17:00:00 - MoveryBorrar - Workflow execution finished
2025/02/23 17:00:00 - MoveryBorrar - Workflow duration : 0.045 seconds [  0.045" ]
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Signaling 'output done' to 0 output rowsets.
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Finished processing (I=0, O=0, R=1, W=0, U=0, E=0)
2025/02/23 17:00:00 - Ejecutor - Pipeline duration : 0.103 seconds [  0.103" ]
2025/02/23 17:00:00 - Ejecutor - Execution finished on a local pipeline engine with run configuration 'local'
2025/02/23 17:00:00 - Ejecutor.hpl - Using run configuration [local]
2025/02/23 17:00:00 - Ejecutor - nr of transforms to run : 2  , nr of hops : 1
2025/02/23 17:00:00 - Ejecutor - Executing this pipeline using the Local Pipeline Engine with run configuration 'local'
2025/02/23 17:00:00 - Ejecutor - Not running a unit test...
2025/02/23 17:00:00 - Ejecutor - Execution started for pipeline [Ejecutor]
2025/02/23 17:00:00 - Ejecutor - I found 2 different transforms to launch.
2025/02/23 17:00:00 - Ejecutor - Allocating rowsets...
2025/02/23 17:00:00 - Ejecutor -  Allocating rowsets for transform 0 --> Get rows from result
2025/02/23 17:00:00 - Ejecutor -   prevcopies = 1, nextcopies=1
2025/02/23 17:00:00 - Ejecutor - Pipeline allocated new rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:00 - Ejecutor -  Allocated 1 rowsets for transform 0 --> Get rows from result  
2025/02/23 17:00:00 - Ejecutor -  Allocating rowsets for transform 1 --> MoveryBorrar.hwf
2025/02/23 17:00:00 - Ejecutor -  Allocated 1 rowsets for transform 1 --> MoveryBorrar.hwf  
2025/02/23 17:00:00 - Ejecutor - Allocating Transforms & TransformData...
2025/02/23 17:00:00 - Ejecutor -  Pipeline is about to allocate transform [Get rows from result] of type [RowsFromResult]
2025/02/23 17:00:00 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:00 - Get rows from result.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:00 - Get rows from result.0 - Transform info: nrinput=0 nroutput=1
2025/02/23 17:00:00 - Get rows from result.0 - output rel. is 1:1
2025/02/23 17:00:00 - Get rows from result.0 - Found output rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:00 - Get rows from result.0 - Finished dispatching
2025/02/23 17:00:00 - Ejecutor -  Pipeline has allocated a new transform: [Get rows from result].0
2025/02/23 17:00:00 - Ejecutor -  Pipeline is about to allocate transform [MoveryBorrar.hwf] of type [WorkflowExecutor]
2025/02/23 17:00:00 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Transform info: nrinput=1 nroutput=0
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Got previous transform from [MoveryBorrar.hwf] #0 --> Get rows from result
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - input rel is 1:1
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Found input rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Finished dispatching
2025/02/23 17:00:00 - Ejecutor -  Pipeline has allocated a new transform: [MoveryBorrar.hwf].0
2025/02/23 17:00:00 - Ejecutor - Initialising 2 transforms...
2025/02/23 17:00:00 - Ejecutor - Transform [Get rows from result.0] initialized flawlessly.
2025/02/23 17:00:00 - Ejecutor - Transform [MoveryBorrar.hwf.0] initialized flawlessly.
2025/02/23 17:00:00 - Ejecutor - Data Set enabled? false
2025/02/23 17:00:00 - Get rows from result.0 - Starting to run...
2025/02/23 17:00:00 - Ejecutor - Pipeline has allocated 2 threads and 1 rowsets.
2025/02/23 17:00:00 - Get rows from result.0 - Signaling 'output done' to 1 output rowsets.
2025/02/23 17:00:00 - Get rows from result.0 - Finished processing (I=0, O=0, R=1, W=1, U=0, E=0)
2025/02/23 17:00:00 - MoveryBorrar.hwf.0 - Starting to run...
2025/02/23 17:00:01 - MoveryBorrar - Start of workflow execution
2025/02/23 17:00:01 - MoveryBorrar - Set debug level information on workflow : MoveryBorrar
2025/02/23 17:00:01 - MoveryBorrar - Found debug level info for workflow actions : [Script Mover]
2025/02/23 17:00:01 - MoveryBorrar - exec(0, 0, Start)
2025/02/23 17:00:01 - Start - Starting action
2025/02/23 17:00:01 - MoveryBorrar - Starting action [Mover Archivos]
2025/02/23 17:00:01 - MoveryBorrar - exec(1, 0, Mover Archivos)
2025/02/23 17:00:01 - Mover Archivos - Starting action
2025/02/23 17:00:01 - Mover Archivos - Found 1 previous result rows
2025/02/23 17:00:01 - Mover Archivos - Running on platform : Linux
2025/02/23 17:00:01 - Mover Archivos - Executing command : /tmp/hop_a95b7f20-a0bd-44ae-8d3f-e2634d58537dshell
2025/02/23 17:00:01 - Mover Archivos - ERROR: (stderr) cp: falta el operando archivo de destino después de '/media/tawa/LM21.3_2/Backup/Scribus/////'
2025/02/23 17:00:01 - Mover Archivos - ERROR: (stderr) Pruebe 'cp --help' para más información.
2025/02/23 17:00:01 - Mover Archivos - Command /tmp/hop_a95b7f20-a0bd-44ae-8d3f-e2634d58537dshell has finished
2025/02/23 17:00:01 - Mover Archivos - Exit status of shell [null] was 1
2025/02/23 17:00:01 - MoveryBorrar - Finished action [Mover Archivos] (result=[false])
2025/02/23 17:00:01 - MoveryBorrar - Workflow execution finished
2025/02/23 17:00:01 - MoveryBorrar - Workflow duration : 0.045 seconds [  0.045" ]
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Signaling 'output done' to 0 output rowsets.
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Finished processing (I=0, O=0, R=1, W=0, U=0, E=0)
2025/02/23 17:00:01 - Ejecutor - Pipeline duration : 0.105 seconds [  0.105" ]
2025/02/23 17:00:01 - Ejecutor - Execution finished on a local pipeline engine with run configuration 'local'
2025/02/23 17:00:01 - Ejecutor.hpl - Using run configuration [local]
2025/02/23 17:00:01 - Ejecutor - nr of transforms to run : 2  , nr of hops : 1
2025/02/23 17:00:01 - Ejecutor - Executing this pipeline using the Local Pipeline Engine with run configuration 'local'
2025/02/23 17:00:01 - Ejecutor - Not running a unit test...
2025/02/23 17:00:01 - Ejecutor - Execution started for pipeline [Ejecutor]
2025/02/23 17:00:01 - Ejecutor - I found 2 different transforms to launch.
2025/02/23 17:00:01 - Ejecutor - Allocating rowsets...
2025/02/23 17:00:01 - Ejecutor -  Allocating rowsets for transform 0 --> Get rows from result
2025/02/23 17:00:01 - Ejecutor -   prevcopies = 1, nextcopies=1
2025/02/23 17:00:01 - Ejecutor - Pipeline allocated new rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - Ejecutor -  Allocated 1 rowsets for transform 0 --> Get rows from result  
2025/02/23 17:00:01 - Ejecutor -  Allocating rowsets for transform 1 --> MoveryBorrar.hwf
2025/02/23 17:00:01 - Ejecutor -  Allocated 1 rowsets for transform 1 --> MoveryBorrar.hwf  
2025/02/23 17:00:01 - Ejecutor - Allocating Transforms & TransformData...
2025/02/23 17:00:01 - Ejecutor -  Pipeline is about to allocate transform [Get rows from result] of type [RowsFromResult]
2025/02/23 17:00:01 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:01 - Get rows from result.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:01 - Get rows from result.0 - Transform info: nrinput=0 nroutput=1
2025/02/23 17:00:01 - Get rows from result.0 - output rel. is 1:1
2025/02/23 17:00:01 - Get rows from result.0 - Found output rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - Get rows from result.0 - Finished dispatching
2025/02/23 17:00:01 - Ejecutor -  Pipeline has allocated a new transform: [Get rows from result].0
2025/02/23 17:00:01 - Ejecutor -  Pipeline is about to allocate transform [MoveryBorrar.hwf] of type [WorkflowExecutor]
2025/02/23 17:00:01 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Transform info: nrinput=1 nroutput=0
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Got previous transform from [MoveryBorrar.hwf] #0 --> Get rows from result
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - input rel is 1:1
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Found input rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Finished dispatching
2025/02/23 17:00:01 - Ejecutor -  Pipeline has allocated a new transform: [MoveryBorrar.hwf].0
2025/02/23 17:00:01 - Ejecutor - Initialising 2 transforms...
2025/02/23 17:00:01 - Ejecutor - Transform [Get rows from result.0] initialized flawlessly.
2025/02/23 17:00:01 - Ejecutor - Transform [MoveryBorrar.hwf.0] initialized flawlessly.
2025/02/23 17:00:01 - Ejecutor - Data Set enabled? false
2025/02/23 17:00:01 - Get rows from result.0 - Starting to run...
2025/02/23 17:00:01 - Get rows from result.0 - Signaling 'output done' to 1 output rowsets.
2025/02/23 17:00:01 - Get rows from result.0 - Finished processing (I=0, O=0, R=1, W=1, U=0, E=0)
2025/02/23 17:00:01 - Ejecutor - Pipeline has allocated 2 threads and 1 rowsets.
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Starting to run...
2025/02/23 17:00:01 - MoveryBorrar - Start of workflow execution
2025/02/23 17:00:01 - MoveryBorrar - Set debug level information on workflow : MoveryBorrar
2025/02/23 17:00:01 - MoveryBorrar - Found debug level info for workflow actions : [Script Mover]
2025/02/23 17:00:01 - MoveryBorrar - exec(0, 0, Start)
2025/02/23 17:00:01 - Start - Starting action
2025/02/23 17:00:01 - MoveryBorrar - Starting action [Mover Archivos]
2025/02/23 17:00:01 - MoveryBorrar - exec(1, 0, Mover Archivos)
2025/02/23 17:00:01 - Mover Archivos - Starting action
2025/02/23 17:00:01 - Mover Archivos - Found 1 previous result rows
2025/02/23 17:00:01 - Mover Archivos - Running on platform : Linux
2025/02/23 17:00:01 - Mover Archivos - Executing command : /tmp/hop_4068dde8-e608-433a-9084-eaf3c4578ac7shell
2025/02/23 17:00:01 - Mover Archivos - ERROR: (stderr) cp: falta el operando archivo de destino después de '/media/tawa/LM21.3_2/Backup/Scribus/////'
2025/02/23 17:00:01 - Mover Archivos - ERROR: (stderr) Pruebe 'cp --help' para más información.
2025/02/23 17:00:01 - Mover Archivos - Command /tmp/hop_4068dde8-e608-433a-9084-eaf3c4578ac7shell has finished
2025/02/23 17:00:01 - Mover Archivos - Exit status of shell [null] was 1
2025/02/23 17:00:01 - MoveryBorrar - Finished action [Mover Archivos] (result=[false])
2025/02/23 17:00:01 - MoveryBorrar - Workflow execution finished
2025/02/23 17:00:01 - MoveryBorrar - Workflow duration : 0.053 seconds [  0.053" ]
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Signaling 'output done' to 0 output rowsets.
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Finished processing (I=0, O=0, R=1, W=0, U=0, E=0)
2025/02/23 17:00:01 - Ejecutor - Pipeline duration : 0.138 seconds [  0.138" ]
2025/02/23 17:00:01 - Ejecutor - Execution finished on a local pipeline engine with run configuration 'local'
2025/02/23 17:00:01 - Ejecutor.hpl - Using run configuration [local]
2025/02/23 17:00:01 - Ejecutor - nr of transforms to run : 2  , nr of hops : 1
2025/02/23 17:00:01 - Ejecutor - Executing this pipeline using the Local Pipeline Engine with run configuration 'local'
2025/02/23 17:00:01 - Ejecutor - Not running a unit test...
2025/02/23 17:00:01 - Ejecutor - Execution started for pipeline [Ejecutor]
2025/02/23 17:00:01 - Ejecutor - I found 2 different transforms to launch.
2025/02/23 17:00:01 - Ejecutor - Allocating rowsets...
2025/02/23 17:00:01 - Ejecutor -  Allocating rowsets for transform 0 --> Get rows from result
2025/02/23 17:00:01 - Ejecutor -   prevcopies = 1, nextcopies=1
2025/02/23 17:00:01 - Ejecutor - Pipeline allocated new rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - Ejecutor -  Allocated 1 rowsets for transform 0 --> Get rows from result  
2025/02/23 17:00:01 - Ejecutor -  Allocating rowsets for transform 1 --> MoveryBorrar.hwf
2025/02/23 17:00:01 - Ejecutor -  Allocated 1 rowsets for transform 1 --> MoveryBorrar.hwf  
2025/02/23 17:00:01 - Ejecutor - Allocating Transforms & TransformData...
2025/02/23 17:00:01 - Ejecutor -  Pipeline is about to allocate transform [Get rows from result] of type [RowsFromResult]
2025/02/23 17:00:01 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:01 - Get rows from result.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:01 - Get rows from result.0 - Transform info: nrinput=0 nroutput=1
2025/02/23 17:00:01 - Get rows from result.0 - output rel. is 1:1
2025/02/23 17:00:01 - Get rows from result.0 - Found output rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - Get rows from result.0 - Finished dispatching
2025/02/23 17:00:01 - Ejecutor -  Pipeline has allocated a new transform: [Get rows from result].0
2025/02/23 17:00:01 - Ejecutor -  Pipeline is about to allocate transform [MoveryBorrar.hwf] of type [WorkflowExecutor]
2025/02/23 17:00:01 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Transform info: nrinput=1 nroutput=0
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Got previous transform from [MoveryBorrar.hwf] #0 --> Get rows from result
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - input rel is 1:1
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Found input rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Finished dispatching
2025/02/23 17:00:01 - Ejecutor -  Pipeline has allocated a new transform: [MoveryBorrar.hwf].0
2025/02/23 17:00:01 - Ejecutor - Initialising 2 transforms...
2025/02/23 17:00:01 - Ejecutor - Transform [Get rows from result.0] initialized flawlessly.
2025/02/23 17:00:01 - Ejecutor - Transform [MoveryBorrar.hwf.0] initialized flawlessly.
2025/02/23 17:00:01 - Ejecutor - Data Set enabled? false
2025/02/23 17:00:01 - Get rows from result.0 - Starting to run...
2025/02/23 17:00:01 - Get rows from result.0 - Signaling 'output done' to 1 output rowsets.
2025/02/23 17:00:01 - Get rows from result.0 - Finished processing (I=0, O=0, R=1, W=1, U=0, E=0)
2025/02/23 17:00:01 - Ejecutor - Pipeline has allocated 2 threads and 1 rowsets.
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Starting to run...
2025/02/23 17:00:01 - MoveryBorrar - Start of workflow execution
2025/02/23 17:00:01 - MoveryBorrar - Set debug level information on workflow : MoveryBorrar
2025/02/23 17:00:01 - MoveryBorrar - Found debug level info for workflow actions : [Script Mover]
2025/02/23 17:00:01 - MoveryBorrar - exec(0, 0, Start)
2025/02/23 17:00:01 - Start - Starting action
2025/02/23 17:00:01 - MoveryBorrar - Starting action [Mover Archivos]
2025/02/23 17:00:01 - MoveryBorrar - exec(1, 0, Mover Archivos)
2025/02/23 17:00:01 - Mover Archivos - Starting action
2025/02/23 17:00:01 - Mover Archivos - Found 1 previous result rows
2025/02/23 17:00:01 - Mover Archivos - Running on platform : Linux
2025/02/23 17:00:01 - Mover Archivos - Executing command : /tmp/hop_a0ef1fb8-ae75-4f3e-9ab6-15db1b739863shell
2025/02/23 17:00:01 - Mover Archivos - ERROR: (stderr) cp: falta el operando archivo de destino después de '/media/tawa/LM21.3_2/Backup/Scribus/////'
2025/02/23 17:00:01 - Mover Archivos - ERROR: (stderr) Pruebe 'cp --help' para más información.
2025/02/23 17:00:01 - Mover Archivos - Command /tmp/hop_a0ef1fb8-ae75-4f3e-9ab6-15db1b739863shell has finished
2025/02/23 17:00:01 - Mover Archivos - Exit status of shell [null] was 1
2025/02/23 17:00:01 - MoveryBorrar - Finished action [Mover Archivos] (result=[false])
2025/02/23 17:00:01 - MoveryBorrar - Workflow execution finished
2025/02/23 17:00:01 - MoveryBorrar - Workflow duration : 0.064 seconds [  0.064" ]
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Signaling 'output done' to 0 output rowsets.
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Finished processing (I=0, O=0, R=1, W=0, U=0, E=0)
2025/02/23 17:00:01 - Ejecutor - Pipeline duration : 0.15 seconds [  0.150" ]
2025/02/23 17:00:01 - Ejecutor.hpl - Using run configuration [local]
2025/02/23 17:00:01 - Ejecutor - Execution finished on a local pipeline engine with run configuration 'local'
2025/02/23 17:00:01 - Ejecutor - nr of transforms to run : 2  , nr of hops : 1
2025/02/23 17:00:01 - Ejecutor - Executing this pipeline using the Local Pipeline Engine with run configuration 'local'
2025/02/23 17:00:01 - Ejecutor - Not running a unit test...
2025/02/23 17:00:01 - Ejecutor - Execution started for pipeline [Ejecutor]
2025/02/23 17:00:01 - Ejecutor - I found 2 different transforms to launch.
2025/02/23 17:00:01 - Ejecutor - Allocating rowsets...
2025/02/23 17:00:01 - Ejecutor -  Allocating rowsets for transform 0 --> Get rows from result
2025/02/23 17:00:01 - Ejecutor -   prevcopies = 1, nextcopies=1
2025/02/23 17:00:01 - Ejecutor - Pipeline allocated new rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - Ejecutor -  Allocated 1 rowsets for transform 0 --> Get rows from result  
2025/02/23 17:00:01 - Ejecutor -  Allocating rowsets for transform 1 --> MoveryBorrar.hwf
2025/02/23 17:00:01 - Ejecutor -  Allocated 1 rowsets for transform 1 --> MoveryBorrar.hwf  
2025/02/23 17:00:01 - Ejecutor - Allocating Transforms & TransformData...
2025/02/23 17:00:01 - Ejecutor -  Pipeline is about to allocate transform [Get rows from result] of type [RowsFromResult]
2025/02/23 17:00:01 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:01 - Get rows from result.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:01 - Get rows from result.0 - Transform info: nrinput=0 nroutput=1
2025/02/23 17:00:01 - Get rows from result.0 - output rel. is 1:1
2025/02/23 17:00:01 - Get rows from result.0 - Found output rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - Get rows from result.0 - Finished dispatching
2025/02/23 17:00:01 - Ejecutor -  Pipeline has allocated a new transform: [Get rows from result].0
2025/02/23 17:00:01 - Ejecutor -  Pipeline is about to allocate transform [MoveryBorrar.hwf] of type [WorkflowExecutor]
2025/02/23 17:00:01 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Transform info: nrinput=1 nroutput=0
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Got previous transform from [MoveryBorrar.hwf] #0 --> Get rows from result
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - input rel is 1:1
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Found input rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Finished dispatching
2025/02/23 17:00:01 - Ejecutor -  Pipeline has allocated a new transform: [MoveryBorrar.hwf].0
2025/02/23 17:00:01 - Ejecutor - Initialising 2 transforms...
2025/02/23 17:00:01 - Ejecutor - Transform [Get rows from result.0] initialized flawlessly.
2025/02/23 17:00:01 - Ejecutor - Transform [MoveryBorrar.hwf.0] initialized flawlessly.
2025/02/23 17:00:01 - Ejecutor - Data Set enabled? false
2025/02/23 17:00:01 - Ejecutor - Pipeline has allocated 2 threads and 1 rowsets.
2025/02/23 17:00:01 - Get rows from result.0 - Starting to run...
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Starting to run...
2025/02/23 17:00:01 - Get rows from result.0 - Signaling 'output done' to 1 output rowsets.
2025/02/23 17:00:01 - Get rows from result.0 - Finished processing (I=0, O=0, R=1, W=1, U=0, E=0)
2025/02/23 17:00:01 - MoveryBorrar - Start of workflow execution
2025/02/23 17:00:01 - MoveryBorrar - Set debug level information on workflow : MoveryBorrar
2025/02/23 17:00:01 - MoveryBorrar - Found debug level info for workflow actions : [Script Mover]
2025/02/23 17:00:01 - MoveryBorrar - exec(0, 0, Start)
2025/02/23 17:00:01 - Start - Starting action
2025/02/23 17:00:01 - MoveryBorrar - Starting action [Mover Archivos]
2025/02/23 17:00:01 - MoveryBorrar - exec(1, 0, Mover Archivos)
2025/02/23 17:00:01 - Mover Archivos - Starting action
2025/02/23 17:00:01 - Mover Archivos - Found 1 previous result rows
2025/02/23 17:00:01 - Mover Archivos - Running on platform : Linux
2025/02/23 17:00:01 - Mover Archivos - Executing command : /tmp/hop_227f2e38-f47e-47d6-9f5f-2802b3a931e9shell
2025/02/23 17:00:01 - Mover Archivos - ERROR: (stderr) cp: falta el operando archivo de destino después de '/media/tawa/LM21.3_2/Backup/Scribus/////'
2025/02/23 17:00:01 - Mover Archivos - ERROR: (stderr) Pruebe 'cp --help' para más información.
2025/02/23 17:00:01 - Mover Archivos - Command /tmp/hop_227f2e38-f47e-47d6-9f5f-2802b3a931e9shell has finished
2025/02/23 17:00:01 - Mover Archivos - Exit status of shell [null] was 1
2025/02/23 17:00:01 - MoveryBorrar - Finished action [Mover Archivos] (result=[false])
2025/02/23 17:00:01 - MoveryBorrar - Workflow execution finished
2025/02/23 17:00:01 - MoveryBorrar - Workflow duration : 0.042 seconds [  0.042" ]
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Signaling 'output done' to 0 output rowsets.
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Finished processing (I=0, O=0, R=1, W=0, U=0, E=0)
2025/02/23 17:00:01 - Ejecutor - Pipeline duration : 0.099 seconds [  0.099" ]
2025/02/23 17:00:01 - Ejecutor - Execution finished on a local pipeline engine with run configuration 'local'
2025/02/23 17:00:01 - Ejecutor.hpl - Using run configuration [local]
2025/02/23 17:00:01 - Ejecutor - nr of transforms to run : 2  , nr of hops : 1
2025/02/23 17:00:01 - Ejecutor - Executing this pipeline using the Local Pipeline Engine with run configuration 'local'
2025/02/23 17:00:01 - Ejecutor - Not running a unit test...
2025/02/23 17:00:01 - Ejecutor - Execution started for pipeline [Ejecutor]
2025/02/23 17:00:01 - Ejecutor - I found 2 different transforms to launch.
2025/02/23 17:00:01 - Ejecutor - Allocating rowsets...
2025/02/23 17:00:01 - Ejecutor -  Allocating rowsets for transform 0 --> Get rows from result
2025/02/23 17:00:01 - Ejecutor -   prevcopies = 1, nextcopies=1
2025/02/23 17:00:01 - Ejecutor - Pipeline allocated new rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - Ejecutor -  Allocated 1 rowsets for transform 0 --> Get rows from result  
2025/02/23 17:00:01 - Ejecutor -  Allocating rowsets for transform 1 --> MoveryBorrar.hwf
2025/02/23 17:00:01 - Ejecutor -  Allocated 1 rowsets for transform 1 --> MoveryBorrar.hwf  
2025/02/23 17:00:01 - Ejecutor - Allocating Transforms & TransformData...
2025/02/23 17:00:01 - Ejecutor -  Pipeline is about to allocate transform [Get rows from result] of type [RowsFromResult]
2025/02/23 17:00:01 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:01 - Get rows from result.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:01 - Get rows from result.0 - Transform info: nrinput=0 nroutput=1
2025/02/23 17:00:01 - Get rows from result.0 - output rel. is 1:1
2025/02/23 17:00:01 - Get rows from result.0 - Found output rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - Get rows from result.0 - Finished dispatching
2025/02/23 17:00:01 - Ejecutor -  Pipeline has allocated a new transform: [Get rows from result].0
2025/02/23 17:00:01 - Ejecutor -  Pipeline is about to allocate transform [MoveryBorrar.hwf] of type [WorkflowExecutor]
2025/02/23 17:00:01 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Transform info: nrinput=1 nroutput=0
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Got previous transform from [MoveryBorrar.hwf] #0 --> Get rows from result
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - input rel is 1:1
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Found input rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Finished dispatching
2025/02/23 17:00:01 - Ejecutor -  Pipeline has allocated a new transform: [MoveryBorrar.hwf].0
2025/02/23 17:00:01 - Ejecutor - Initialising 2 transforms...
2025/02/23 17:00:01 - Ejecutor - Transform [Get rows from result.0] initialized flawlessly.
2025/02/23 17:00:01 - Ejecutor - Transform [MoveryBorrar.hwf.0] initialized flawlessly.
2025/02/23 17:00:01 - Ejecutor - Data Set enabled? false
2025/02/23 17:00:01 - Get rows from result.0 - Starting to run...
2025/02/23 17:00:01 - Ejecutor - Pipeline has allocated 2 threads and 1 rowsets.
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Starting to run...
2025/02/23 17:00:01 - Get rows from result.0 - Signaling 'output done' to 1 output rowsets.
2025/02/23 17:00:01 - Get rows from result.0 - Finished processing (I=0, O=0, R=1, W=1, U=0, E=0)
2025/02/23 17:00:01 - MoveryBorrar - Start of workflow execution
2025/02/23 17:00:01 - MoveryBorrar - Set debug level information on workflow : MoveryBorrar
2025/02/23 17:00:01 - MoveryBorrar - Found debug level info for workflow actions : [Script Mover]
2025/02/23 17:00:01 - MoveryBorrar - exec(0, 0, Start)
2025/02/23 17:00:01 - Start - Starting action
2025/02/23 17:00:01 - MoveryBorrar - Starting action [Mover Archivos]
2025/02/23 17:00:01 - MoveryBorrar - exec(1, 0, Mover Archivos)
2025/02/23 17:00:01 - Mover Archivos - Starting action
2025/02/23 17:00:01 - Mover Archivos - Found 1 previous result rows
2025/02/23 17:00:01 - Mover Archivos - Running on platform : Linux
2025/02/23 17:00:01 - Mover Archivos - Executing command : /tmp/hop_3c27b091-47a7-415d-936c-9e38d7e29e37shell
2025/02/23 17:00:01 - Mover Archivos - ERROR: (stderr) cp: falta el operando archivo de destino después de '/media/tawa/LM21.3_2/Backup/Scribus/////'
2025/02/23 17:00:01 - Mover Archivos - ERROR: (stderr) Pruebe 'cp --help' para más información.
2025/02/23 17:00:01 - Mover Archivos - Command /tmp/hop_3c27b091-47a7-415d-936c-9e38d7e29e37shell has finished
2025/02/23 17:00:01 - Mover Archivos - Exit status of shell [null] was 1
2025/02/23 17:00:01 - MoveryBorrar - Finished action [Mover Archivos] (result=[false])
2025/02/23 17:00:01 - MoveryBorrar - Workflow execution finished
2025/02/23 17:00:01 - MoveryBorrar - Workflow duration : 0.046 seconds [  0.046" ]
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Signaling 'output done' to 0 output rowsets.
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Finished processing (I=0, O=0, R=1, W=0, U=0, E=0)
2025/02/23 17:00:01 - Ejecutor - Pipeline duration : 0.103 seconds [  0.103" ]
2025/02/23 17:00:01 - Ejecutor - Execution finished on a local pipeline engine with run configuration 'local'
2025/02/23 17:00:01 - Ejecutor.hpl - Using run configuration [local]
2025/02/23 17:00:01 - Ejecutor - nr of transforms to run : 2  , nr of hops : 1
2025/02/23 17:00:01 - Ejecutor - Executing this pipeline using the Local Pipeline Engine with run configuration 'local'
2025/02/23 17:00:01 - Ejecutor - Not running a unit test...
2025/02/23 17:00:01 - Ejecutor - Execution started for pipeline [Ejecutor]
2025/02/23 17:00:01 - Ejecutor - I found 2 different transforms to launch.
2025/02/23 17:00:01 - Ejecutor - Allocating rowsets...
2025/02/23 17:00:01 - Ejecutor -  Allocating rowsets for transform 0 --> Get rows from result
2025/02/23 17:00:01 - Ejecutor -   prevcopies = 1, nextcopies=1
2025/02/23 17:00:01 - Ejecutor - Pipeline allocated new rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - Ejecutor -  Allocated 1 rowsets for transform 0 --> Get rows from result  
2025/02/23 17:00:01 - Ejecutor -  Allocating rowsets for transform 1 --> MoveryBorrar.hwf
2025/02/23 17:00:01 - Ejecutor -  Allocated 1 rowsets for transform 1 --> MoveryBorrar.hwf  
2025/02/23 17:00:01 - Ejecutor - Allocating Transforms & TransformData...
2025/02/23 17:00:01 - Ejecutor -  Pipeline is about to allocate transform [Get rows from result] of type [RowsFromResult]
2025/02/23 17:00:01 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:01 - Get rows from result.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:01 - Get rows from result.0 - Transform info: nrinput=0 nroutput=1
2025/02/23 17:00:01 - Get rows from result.0 - output rel. is 1:1
2025/02/23 17:00:01 - Get rows from result.0 - Found output rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - Get rows from result.0 - Finished dispatching
2025/02/23 17:00:01 - Ejecutor -  Pipeline has allocated a new transform: [Get rows from result].0
2025/02/23 17:00:01 - Ejecutor -  Pipeline is about to allocate transform [MoveryBorrar.hwf] of type [WorkflowExecutor]
2025/02/23 17:00:01 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Transform info: nrinput=1 nroutput=0
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Got previous transform from [MoveryBorrar.hwf] #0 --> Get rows from result
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - input rel is 1:1
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Found input rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Finished dispatching
2025/02/23 17:00:01 - Ejecutor -  Pipeline has allocated a new transform: [MoveryBorrar.hwf].0
2025/02/23 17:00:01 - Ejecutor - Initialising 2 transforms...
2025/02/23 17:00:01 - Ejecutor - Transform [Get rows from result.0] initialized flawlessly.
2025/02/23 17:00:01 - Ejecutor - Transform [MoveryBorrar.hwf.0] initialized flawlessly.
2025/02/23 17:00:01 - Ejecutor - Data Set enabled? false
2025/02/23 17:00:01 - Ejecutor - Pipeline has allocated 2 threads and 1 rowsets.
2025/02/23 17:00:01 - Get rows from result.0 - Starting to run...
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Starting to run...
2025/02/23 17:00:01 - Get rows from result.0 - Signaling 'output done' to 1 output rowsets.
2025/02/23 17:00:01 - Get rows from result.0 - Finished processing (I=0, O=0, R=1, W=1, U=0, E=0)
2025/02/23 17:00:01 - MoveryBorrar - Start of workflow execution
2025/02/23 17:00:01 - MoveryBorrar - Set debug level information on workflow : MoveryBorrar
2025/02/23 17:00:01 - MoveryBorrar - Found debug level info for workflow actions : [Script Mover]
2025/02/23 17:00:01 - MoveryBorrar - exec(0, 0, Start)
2025/02/23 17:00:01 - Start - Starting action
2025/02/23 17:00:01 - MoveryBorrar - Starting action [Mover Archivos]
2025/02/23 17:00:01 - MoveryBorrar - exec(1, 0, Mover Archivos)
2025/02/23 17:00:01 - Mover Archivos - Starting action
2025/02/23 17:00:01 - Mover Archivos - Found 1 previous result rows
2025/02/23 17:00:01 - Mover Archivos - Running on platform : Linux
2025/02/23 17:00:01 - Mover Archivos - Executing command : /tmp/hop_b66b1569-f965-4609-8104-617f831b91d6shell
2025/02/23 17:00:01 - Mover Archivos - ERROR: (stderr) cp: falta el operando archivo de destino después de '/media/tawa/LM21.3_2/Backup/Scribus/////'
2025/02/23 17:00:01 - Mover Archivos - ERROR: (stderr) Pruebe 'cp --help' para más información.
2025/02/23 17:00:01 - Mover Archivos - Command /tmp/hop_b66b1569-f965-4609-8104-617f831b91d6shell has finished
2025/02/23 17:00:01 - Mover Archivos - Exit status of shell [null] was 1
2025/02/23 17:00:01 - MoveryBorrar - Finished action [Mover Archivos] (result=[false])
2025/02/23 17:00:01 - MoveryBorrar - Workflow execution finished
2025/02/23 17:00:01 - MoveryBorrar - Workflow duration : 0.055 seconds [  0.055" ]
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Signaling 'output done' to 0 output rowsets.
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Finished processing (I=0, O=0, R=1, W=0, U=0, E=0)
2025/02/23 17:00:01 - Ejecutor - Pipeline duration : 0.117 seconds [  0.117" ]
2025/02/23 17:00:01 - Ejecutor - Execution finished on a local pipeline engine with run configuration 'local'
2025/02/23 17:00:01 - Ejecutor.hpl - Using run configuration [local]
2025/02/23 17:00:01 - Ejecutor - nr of transforms to run : 2  , nr of hops : 1
2025/02/23 17:00:01 - Ejecutor - Executing this pipeline using the Local Pipeline Engine with run configuration 'local'
2025/02/23 17:00:01 - Ejecutor - Not running a unit test...
2025/02/23 17:00:01 - Ejecutor - Execution started for pipeline [Ejecutor]
2025/02/23 17:00:01 - Ejecutor - I found 2 different transforms to launch.
2025/02/23 17:00:01 - Ejecutor - Allocating rowsets...
2025/02/23 17:00:01 - Ejecutor -  Allocating rowsets for transform 0 --> Get rows from result
2025/02/23 17:00:01 - Ejecutor -   prevcopies = 1, nextcopies=1
2025/02/23 17:00:01 - Ejecutor - Pipeline allocated new rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - Ejecutor -  Allocated 1 rowsets for transform 0 --> Get rows from result  
2025/02/23 17:00:01 - Ejecutor -  Allocating rowsets for transform 1 --> MoveryBorrar.hwf
2025/02/23 17:00:01 - Ejecutor -  Allocated 1 rowsets for transform 1 --> MoveryBorrar.hwf  
2025/02/23 17:00:01 - Ejecutor - Allocating Transforms & TransformData...
2025/02/23 17:00:01 - Ejecutor -  Pipeline is about to allocate transform [Get rows from result] of type [RowsFromResult]
2025/02/23 17:00:01 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:01 - Get rows from result.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:01 - Get rows from result.0 - Transform info: nrinput=0 nroutput=1
2025/02/23 17:00:01 - Get rows from result.0 - output rel. is 1:1
2025/02/23 17:00:01 - Get rows from result.0 - Found output rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - Get rows from result.0 - Finished dispatching
2025/02/23 17:00:01 - Ejecutor -  Pipeline has allocated a new transform: [Get rows from result].0
2025/02/23 17:00:01 - Ejecutor -  Pipeline is about to allocate transform [MoveryBorrar.hwf] of type [WorkflowExecutor]
2025/02/23 17:00:01 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Transform info: nrinput=1 nroutput=0
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Got previous transform from [MoveryBorrar.hwf] #0 --> Get rows from result
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - input rel is 1:1
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Found input rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Finished dispatching
2025/02/23 17:00:01 - Ejecutor -  Pipeline has allocated a new transform: [MoveryBorrar.hwf].0
2025/02/23 17:00:01 - Ejecutor - Initialising 2 transforms...
2025/02/23 17:00:01 - Ejecutor - Transform [Get rows from result.0] initialized flawlessly.
2025/02/23 17:00:01 - Ejecutor - Transform [MoveryBorrar.hwf.0] initialized flawlessly.
2025/02/23 17:00:01 - Ejecutor - Data Set enabled? false
2025/02/23 17:00:01 - Ejecutor - Pipeline has allocated 2 threads and 1 rowsets.
2025/02/23 17:00:01 - Get rows from result.0 - Starting to run...
2025/02/23 17:00:01 - Get rows from result.0 - Signaling 'output done' to 1 output rowsets.
2025/02/23 17:00:01 - Get rows from result.0 - Finished processing (I=0, O=0, R=1, W=1, U=0, E=0)
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Starting to run...
2025/02/23 17:00:01 - MoveryBorrar - Start of workflow execution
2025/02/23 17:00:01 - MoveryBorrar - Set debug level information on workflow : MoveryBorrar
2025/02/23 17:00:01 - MoveryBorrar - Found debug level info for workflow actions : [Script Mover]
2025/02/23 17:00:01 - MoveryBorrar - exec(0, 0, Start)
2025/02/23 17:00:01 - Start - Starting action
2025/02/23 17:00:01 - MoveryBorrar - Starting action [Mover Archivos]
2025/02/23 17:00:01 - MoveryBorrar - exec(1, 0, Mover Archivos)
2025/02/23 17:00:01 - Mover Archivos - Starting action
2025/02/23 17:00:01 - Mover Archivos - Found 1 previous result rows
2025/02/23 17:00:01 - Mover Archivos - Running on platform : Linux
2025/02/23 17:00:01 - Mover Archivos - Executing command : /tmp/hop_e488a67f-f83a-4c24-9731-77830a976395shell
2025/02/23 17:00:01 - Mover Archivos - ERROR: (stderr) cp: falta el operando archivo de destino después de '/media/tawa/LM21.3_2/Backup/Scribus/////'
2025/02/23 17:00:01 - Mover Archivos - ERROR: (stderr) Pruebe 'cp --help' para más información.
2025/02/23 17:00:01 - Mover Archivos - Command /tmp/hop_e488a67f-f83a-4c24-9731-77830a976395shell has finished
2025/02/23 17:00:01 - Mover Archivos - Exit status of shell [null] was 1
2025/02/23 17:00:01 - MoveryBorrar - Finished action [Mover Archivos] (result=[false])
2025/02/23 17:00:01 - MoveryBorrar - Workflow execution finished
2025/02/23 17:00:01 - MoveryBorrar - Workflow duration : 0.068 seconds [  0.068" ]
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Signaling 'output done' to 0 output rowsets.
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Finished processing (I=0, O=0, R=1, W=0, U=0, E=0)
2025/02/23 17:00:01 - Ejecutor - Pipeline duration : 0.143 seconds [  0.143" ]
2025/02/23 17:00:01 - Ejecutor - Execution finished on a local pipeline engine with run configuration 'local'
2025/02/23 17:00:01 - Ejecutor.hpl - Using run configuration [local]
2025/02/23 17:00:01 - Ejecutor - nr of transforms to run : 2  , nr of hops : 1
2025/02/23 17:00:01 - Ejecutor - Executing this pipeline using the Local Pipeline Engine with run configuration 'local'
2025/02/23 17:00:01 - Ejecutor - Not running a unit test...
2025/02/23 17:00:01 - Ejecutor - Execution started for pipeline [Ejecutor]
2025/02/23 17:00:01 - Ejecutor - I found 2 different transforms to launch.
2025/02/23 17:00:01 - Ejecutor - Allocating rowsets...
2025/02/23 17:00:01 - Ejecutor -  Allocating rowsets for transform 0 --> Get rows from result
2025/02/23 17:00:01 - Ejecutor -   prevcopies = 1, nextcopies=1
2025/02/23 17:00:01 - Ejecutor - Pipeline allocated new rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - Ejecutor -  Allocated 1 rowsets for transform 0 --> Get rows from result  
2025/02/23 17:00:01 - Ejecutor -  Allocating rowsets for transform 1 --> MoveryBorrar.hwf
2025/02/23 17:00:01 - Ejecutor -  Allocated 1 rowsets for transform 1 --> MoveryBorrar.hwf  
2025/02/23 17:00:01 - Ejecutor - Allocating Transforms & TransformData...
2025/02/23 17:00:01 - Ejecutor -  Pipeline is about to allocate transform [Get rows from result] of type [RowsFromResult]
2025/02/23 17:00:01 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:01 - Get rows from result.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:01 - Get rows from result.0 - Transform info: nrinput=0 nroutput=1
2025/02/23 17:00:01 - Get rows from result.0 - output rel. is 1:1
2025/02/23 17:00:01 - Get rows from result.0 - Found output rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - Get rows from result.0 - Finished dispatching
2025/02/23 17:00:01 - Ejecutor -  Pipeline has allocated a new transform: [Get rows from result].0
2025/02/23 17:00:01 - Ejecutor -  Pipeline is about to allocate transform [MoveryBorrar.hwf] of type [WorkflowExecutor]
2025/02/23 17:00:01 - Ejecutor -   Transform has nrcopies=1
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Starting allocation of buffers & new threads...
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Transform info: nrinput=1 nroutput=0
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Got previous transform from [MoveryBorrar.hwf] #0 --> Get rows from result
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - input rel is 1:1
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Found input rowset [Get rows from result.0 - MoveryBorrar.hwf.0]
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Finished dispatching
2025/02/23 17:00:01 - Ejecutor -  Pipeline has allocated a new transform: [MoveryBorrar.hwf].0
2025/02/23 17:00:01 - Ejecutor - Initialising 2 transforms...
2025/02/23 17:00:01 - Ejecutor - Transform [Get rows from result.0] initialized flawlessly.
2025/02/23 17:00:01 - Ejecutor - Transform [MoveryBorrar.hwf.0] initialized flawlessly.
2025/02/23 17:00:01 - Ejecutor - Data Set enabled? false
2025/02/23 17:00:01 - Get rows from result.0 - Starting to run...
2025/02/23 17:00:01 - Get rows from result.0 - Signaling 'output done' to 1 output rowsets.
2025/02/23 17:00:01 - Get rows from result.0 - Finished processing (I=0, O=0, R=1, W=1, U=0, E=0)
2025/02/23 17:00:01 - MoveryBorrar.hwf.0 - Starting to run...
2025/02/23 17:00:01 - Ejecutor - Pipeline has allocated 2 threads and 1 rowsets.
2025/02/23 17:00:02 - MoveryBorrar - Start of workflow execution
2025/02/23 17:00:02 - MoveryBorrar - Set debug level information on workflow : MoveryBorrar
2025/02/23 17:00:02 - MoveryBorrar - Found debug level info for workflow actions : [Script Mover]
2025/02/23 17:00:02 - MoveryBorrar - exec(0, 0, Start)
2025/02/23 17:00:02 - Start - Starting action
2025/02/23 17:00:02 - MoveryBorrar - Starting action [Mover Archivos]
2025/02/23 17:00:02 - MoveryBorrar - exec(1, 0, Mover Archivos)
2025/02/23 17:00:02 - Mover Archivos - Starting action
2025/02/23 17:00:02 - Mover Archivos - Found 1 previous result rows
2025/02/23 17:00:02 - Mover Archivos - Running on platform : Linux
2025/02/23 17:00:02 - Mover Archivos - Executing command : /tmp/hop_3a6409f4-1681-48f1-8382-f8734a2150b1shell
2025/02/23 17:00:02 - Mover Archivos - ERROR: (stderr) cp: falta el operando archivo de destino después de '/media/tawa/LM21.3_2/Backup/Scribus/////'
2025/02/23 17:00:02 - Mover Archivos - ERROR: (stderr) Pruebe 'cp --help' para más información.
2025/02/23 17:00:02 - Mover Archivos - Command /tmp/hop_3a6409f4-1681-48f1-8382-f8734a2150b1shell has finished
2025/02/23 17:00:02 - Mover Archivos - Exit status of shell [null] was 1
2025/02/23 17:00:02 - MoveryBorrar - Finished action [Mover Archivos] (result=[false])
2025/02/23 17:00:02 - MoveryBorrar - Workflow execution finished
2025/02/23 17:00:02 - MoveryBorrar - Workflow duration : 0.061 seconds [  0.061" ]
2025/02/23 17:00:02 - MoveryBorrar.hwf.0 - Signaling 'output done' to 0 output rowsets.
2025/02/23 17:00:02 - MoveryBorrar.hwf.0 - Finished processing (I=0, O=0, R=1, W=0, U=0, E=0)
2025/02/23 17:00:02 - Ejecutor - Pipeline duration : 0.137 seconds [  0.137" ]
2025/02/23 17:00:02 - Ejecutor - Execution finished on a local pipeline engine with run configuration 'local'
