On Fri, Apr 2, 2010 at 9:57 PM, Nilesh Govindarajan <li...@itech7.com>wrote:
> On 04/02/10 21:52, Ravi Roy wrote: > >> Hi >> I installed Apache/2.2.13 (Unix) on CentOS 5.4. My prolbem is that when >> I try to start and stop it using "sudo /etc/rc.d/init.d/httpd start / >> stop / restart" >> It gives me the following, I googgled a lot but could not really find a >> solution. >> 1.Command : $ sudo /etc/rc.d/init.d/httpd start >> Error Message : >> Starting httpd: (98)Address already in use: make_sock: could not bind to >> address 0.0.0.0:80 <http://0.0.0.0/> <http://0.0.0.0:80 <http://0.0.0.0/>> >> >> >> no listening sockets available, shutting down >> Unable to open logs >> [FAILED] >> 2. Command : $ sudo /etc/rc.d/init.d/httpd stop >> Error message : >> Stopping httpd: [FAILED] >> 3.Command : $sudo /etc/rc.d/init.d/httpd restart >> Error message : >> Stopping httpd: [FAILED] >> Starting httpd: (98)Address already in use: make_sock: could not bind to >> address 0.0.0.0:80 <http://0.0.0.0/> <http://0.0.0.0:80 <http://0.0.0.0/>> >> >> >> no listening sockets available, shutting down >> Unable to open logs >> [FAILED] >> Can sombody help me on this please? >> Thanks! >> -RR >> > > Some other process is already running at port number 80. Use netstat -ltnp > | grep ':80' to get the process name and pid. > Thanks Nilesh, netstat reveals the following : tcp 0 0 :::80 :::* LISTEN 2056/httpd Strange thing I notice is that start / stop / restart fails, but service is still started, I am just curious if service is failed to start (as error message explains) how come it is started at the first place? To my view a command 'stop / restart' should kill a started process and free the port '80' and next initialization should get the port without any error. My http configuration have 'Listen 80' Not much into linux stuff. Forgive me if I am wrong somehere and correct me please. Thanks for your help. - RR
