Dear Sir, In my Xcos diagram file, I am not using any simulation functions. Basically I just want to retrieve stored data from all the blocks (using the scs_m and scs_m.objs). The "Solver" is setup on a block. I coded the block in such a way that when one clicks on the block, it executes a file (which runs some instructions and functions). So i would like the block, on clicking it, to be able to tell which file is in use (if many files are opened in xcos) so it can retrieve the data from that specified xcos file and then carry out the calculations. <http://mailinglists.scilab.org/file/n4033084/Capture.jpg> My files are shown above. As you can see, the same Solver block ("Solve Power Flow") is in both files. I would like the function of the block to importXcosDiagraam("desired xcos file"). So i would like to retrieve the scs_m of one file when many are opened. Regards, Nazreen.
-- View this message in context: http://mailinglists.scilab.org/Scilab-users-Reading-an-xcos-diagram-with-scs-m-tp4032802p4033084.html Sent from the Scilab users - Mailing Lists Archives mailing list archive at Nabble.com. _______________________________________________ users mailing list users@lists.scilab.org http://lists.scilab.org/mailman/listinfo/users