Hi Ted, I've lost the beggining of the thread so excuse me if I'm wrong about the topic. Do you want to get all the vms and host in the same subnet as the rest of your lan or the hole collision domain? When you create the logical networks (LN) in ovirt you can check if they are required or not. If you decide that all your hosts must give access to some subnet for vm use, you can create a LN, mark it as required in your data center (DC) and configure it in every host you have in the dc. Then you have two choices, if you just want the vms to access that subnet, add it to the host without configuring the ip on the host and you'll just get a bridge for vm use. If you want the host to use the bridge also, configure the ip and you'll get both, vms and host to be in the subnet. If what you need is to get every vm access to the hole collision domain, then I don't think you can do it in ovirt as you get a bridge for every logical network and if you have both, tagged and untagged vlan traffic, you won't be able use the same nic (or bond) to place mixed LNs (a limitation I've rised but yet haven't been resolved). Hope this helps. Regards,
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users