On 01/06/2014 07:38 PM, David Li wrote:
Hi Itamar,
Happy New Year!
My host can actually be added manually. However it's status is "Non
Responsive". I put it into "Maintainence" and "Activate" it again
without any success. Any idea how to debug the problem with a stateless
host?
so adding it from the ui ends successfully?
is this with iptables/firewalld on the host off?
does 'vdsClient -s 0 getVdsCaps' on the host as root work?
David
------------------------------------------------------------------------
*From:* Itamar Heim <ih...@redhat.com>
*To:* David Li <david...@sbcglobal.net>; "users@ovirt.org"
<users@ovirt.org>
*Sent:* Tuesday, December 31, 2013 8:49 AM
*Subject:* Re: [Users] What parameters to use in automated node
install to enable engine CLI register?
On 12/20/2013 08:27 PM, David Li wrote:
> Hi Itamar,
>
>
> I logged into the admin portal but didn't see any pending host
approval.
> When I tried to add a new host (my stateless ovirt node), the install
> failed. I can ssh into my node from the machine running the
engine so
> the networking doesn't seem to be the problem. Is it because it
doesn't
> support stateless node? Can you suggest a few ways to debug this?
can you try to simply add the host from the webadmin (via hosts-->add
host dialog)
>
> David
>
>
>
------------------------------------------------------------------------
> *From:* Itamar Heim <ih...@redhat.com <mailto:ih...@redhat.com>>
> *To:* David Li <david...@sbcglobal.net
<mailto:david...@sbcglobal.net>>; "users@ovirt.org
<mailto:users@ovirt.org>"
> <users@ovirt.org <mailto:users@ovirt.org>>
> *Sent:* Thursday, December 19, 2013 1:32 PM
> *Subject:* Re: [Users] What parameters to use in automated node
> install to enable engine CLI register?
>
> On 12/19/2013 01:32 PM, David Li wrote:
> > Hi Itamar,
> >
> >
> > Unfortunately I am restricted to using CLI on the machine
running the
> > engine. Is there any way to use ovirt CLI to do this?
>
> you can't browse the engine from another machine to use its gui?
>
> yes, you can do everything from the cli, to begin with, try to
connect
> with it to the engine and get the list of hosts.
>
> >
> > David
> >
> >
>
------------------------------------------------------------------------
> > *From:* Itamar Heim <ih...@redhat.com
<mailto:ih...@redhat.com> <mailto:ih...@redhat.com
<mailto:ih...@redhat.com>>>
> > *To:* David Li <david...@sbcglobal.net
<mailto:david...@sbcglobal.net>
> <mailto:david...@sbcglobal.net
<mailto:david...@sbcglobal.net>>>; "users@ovirt.org
<mailto:users@ovirt.org>
> <mailto:users@ovirt.org <mailto:users@ovirt.org>>"
> > <users@ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>>
> > *Sent:* Wednesday, December 18, 2013 5:31 PM
> > *Subject:* Re: [Users] What parameters to use in
automated node
> > install to enable engine CLI register?
> >
> > On 12/18/2013 04:33 PM, David Li wrote:
> > > I am still confused. My ovirt shell cli is in
> "disconnected" mode
> > like this:
> > >
> > > [oVirt shell (disconnected)]#
> > > [oVirt shell (disconnected)]#
> > > [oVirt shell (disconnected)]#
> > >
> > >
> > > The only commands I can use are connect, exit and help.
> How do I
> > see my
> > > node? Or maybe the question is if the parameters I
> provided to the
> > > kernel boot options have indeed enabled the node to
> register with the
> > > engine. But again I have no way to know this. Is
there a
> log on
> > the node
> > > side that might give me some clues?
> >
> > well, to begin with, do you see the node in the engine
via the
> > webadmin gui?
> >
> > >
> > > David
> > >
> > >
> >
>
------------------------------------------------------------------------
> > > *From:* Itamar Heim <ih...@redhat.com
<mailto:ih...@redhat.com>
> <mailto:ih...@redhat.com <mailto:ih...@redhat.com>>
<mailto:ih...@redhat.com <mailto:ih...@redhat.com>
> <mailto:ih...@redhat.com <mailto:ih...@redhat.com>>>>
> > > *To:* David Li <david...@sbcglobal.net
<mailto:david...@sbcglobal.net>
> <mailto:david...@sbcglobal.net <mailto:david...@sbcglobal.net>>
> > <mailto:david...@sbcglobal.net
<mailto:david...@sbcglobal.net>
> <mailto:david...@sbcglobal.net
<mailto:david...@sbcglobal.net>>>>; "users@ovirt.org
<mailto:users@ovirt.org>
> <mailto:users@ovirt.org <mailto:users@ovirt.org>>
> > <mailto:users@ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>>"
> > > <users@ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>
> <mailto:users@ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>>>
> > > *Sent:* Wednesday, December 18, 2013 12:04 PM
> > > *Subject:* Re: [Users] What parameters to use in
> automated node
> > > install to enable engine CLI register?
> > >
> > > On 12/18/2013 10:39 AM, David Li wrote:
> > > > Hi Itamar,
> > > >
> > > > I am not sure I understand the question.
> > > > How can I see the node from over-shell CLI
if it's not
> > connected
> > > to it?
> > > > Are you refering to some CLI cmd that
allows me to
> do this?
> > >
> > >
> > > if you PXE boot the node to register to the
engine, it will
> > register
> > > itself in the engine, so the ovirt-shell can
"see it" and
> > approve it.
> > >
> > > note you can also just add the ovirt-node
directly from the
> > engine (via
> > > the gui/cli/api/sdk without the node registering
(you would
> > need to
> > > know
> > > set in the node the root password (for ssh) or the
> engine ssh
> > key for
> > > this to be able to add the node without registering it
> first.
> > > if you register it, it will also get the engine
ssh key
> as part of
> > > registration)
> > >
> > > >
> > > > David
> > > >
> > > >
> > >
> >
>
------------------------------------------------------------------------
> > > > *From:* Itamar Heim <ih...@redhat.com
<mailto:ih...@redhat.com>
> <mailto:ih...@redhat.com <mailto:ih...@redhat.com>>
> > <mailto:ih...@redhat.com <mailto:ih...@redhat.com>
<mailto:ih...@redhat.com <mailto:ih...@redhat.com>>>
> <mailto:ih...@redhat.com <mailto:ih...@redhat.com>
<mailto:ih...@redhat.com <mailto:ih...@redhat.com>>
> > <mailto:ih...@redhat.com <mailto:ih...@redhat.com>
<mailto:ih...@redhat.com <mailto:ih...@redhat.com>>>>>
> > > > *To:* David Li <david...@sbcglobal.net
<mailto:david...@sbcglobal.net>
> <mailto:david...@sbcglobal.net <mailto:david...@sbcglobal.net>>
> > <mailto:david...@sbcglobal.net
<mailto:david...@sbcglobal.net> <mailto:david...@sbcglobal.net
<mailto:david...@sbcglobal.net>>>
> > > <mailto:david...@sbcglobal.net
<mailto:david...@sbcglobal.net>
> <mailto:david...@sbcglobal.net <mailto:david...@sbcglobal.net>>
> > <mailto:david...@sbcglobal.net
<mailto:david...@sbcglobal.net>
> <mailto:david...@sbcglobal.net
<mailto:david...@sbcglobal.net>>>>>; "users@ovirt.org
<mailto:users@ovirt.org>
> <mailto:users@ovirt.org <mailto:users@ovirt.org>>
> > <mailto:users@ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>>
> > > <mailto:users@ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>
> <mailto:users@ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>>>"
> > > > <users@ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>
> <mailto:users@ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>>
> > <mailto:users@ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>
> <mailto:users@ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>>>>
> > > > *Sent:* Wednesday, December 18, 2013 1:17 AM
> > > > *Subject:* Re: [Users] What parameters to
use in
> > automated node
> > > > install to enable engine CLI register?
> > > >
> > > > On 12/17/2013 05:59 PM, David Li wrote:
> > > > > Hi,
> > > > >
> > > > >
> > > > > My node install followed the
automatic install
> > instructions in
> > > > >
> > > > >
> > > >
> > >
> >
>
https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Virtualization/3.0/html/Hypervisor_Deployment_Guide/sect-Deployment_Guide-Installing_Red_Hat_Enterprise_Virtualization_Hypervisors-RHEV_Hypervisor_Kernel_Parameters_and_Automated_Installation.html
> > > > >
> > > > >
> > > > > For the kernel boot parameters, I used
> > > > >
> > > > > management_server=<my machine IP running
ovirt-shell
> > CLI>
> > > > > rhevm_admin_password=xyz
> > > > >
> > > >
> > > > do you see the node in pending approval
state in the
> > engine?'
> > > >
> > > >
> > > > > However I see a few problems when I
tried to use
> > > ovirt-shell CLI to
> > > > > connect to the engine.
> > > > >
> > > > > [oVirt shell (disconnected)]# connect
--url
> > > > "http://<node-IP>:8080/api"
> > > > > --username "admin" --password "xyz"
> > > >
> > > > ovirt-shell is to engine to approve the node,
> not to node
> > > directly.
> > > >
> > > > >
> > > > >
> > > > > 1. Though I can ping the node, but this
cmd gave
> > errors:
> > > error:
> > > > [Errno
> > > > > 113] No route to host
> > > > > 2. What should I use for "--username"
argument?
> > What is
> > > "@domain"?
> > > > >
> > > > > David
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
_______________________________________________
> > > > > Users mailing list
> > > > > Users@ovirt.org
<mailto:Users@ovirt.org> <mailto:Users@ovirt.org
<mailto:Users@ovirt.org>>
> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>
> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>>
> > > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>
> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>>>
> > > > >
http://lists.ovirt.org/mailman/listinfo/users
> > > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> >
> >
> >
>
>
>
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
