On Wed, 2014-05-14 at 20:06 -0400, Bob Doolittle wrote: > Thanks John. > > When hosted-engine aborts, it uninstalls everything. > So there is no webadmin available. > > I've tried modifying the VDSM python code (e.g. > /usr/share/vdsm/storage/multipath.py and > /usr/lib64/python2.7/site-packages/vdsm/tool/service.py) to see/work > around what's going wrong, but oddly VDSM does not seem to be affected. > I suspect the original code (or bytecodes) are cached somewhere. > Restarting vdsmd service has no effect. I'd really appreciate some > insight there so I can work around it. > > Does oVirt 3.4.1 work more smoothly with F20? I chose F19 because it's > more stable at this point, thinking that things would be more likely to > work smoothly. It's not turning out that way... I'm willing to start > over with F20 if there's no path forward.
If stable´s what you want, why not start over with CentOS instead? /K > > -Bob > > On 05/14/2014 07:25 PM, John Taylor wrote: > > Bob, > > I remember something like this with an all-in-one install a while back > > where that error showed up, but it was kind of red herring with > > multipath because the real problem was ovirtmgmt bridge didn't get > > created. And that was a known problem I think with f19 see > > http://www.ovirt.org/OVirt_3.4_TestDay > > "Important Note: Known Fedora 19 bug: If the ovirtmgmt bridge is not > > successfully installed during initial host-setup, manually click on > > the host, setup networks, and add the ovirtmgmt bridge. " > > > > If you can get to webadmin could you try to setup ovirtmgmt manually > > on the host. > > > > -John > > > > On Wed, May 14, 2014 at 6:58 AM, Bob Doolittle <b...@doolittle.us.com> > > wrote: > >> I could really use some help on this one. My efforts to debug VDSM via > >> instrumenting the python code are not working - the compiled code must be > >> cached somehow. > >> > >> Something is wrong with the way the multipathd service is being restarted. > >> It doesn't look too me that systemctl is even being called for it. > >> > >> Thanks, > >> Bob > >> > >> On May 13, 2014 1:12 PM, "Bob Doolittle" <b...@doolittle.us.com> wrote: > >>> Maybe this isn't the actual problem after all. > >>> > >>> I replaced /sbin/multipath with a script runs the old version, but the > >>> suppresses those errors and returns exit status 0. > >>> But "vdsm-tool service-reload multipathd" is still failing and I don't > >>> know why. > >>> > >>> I have attached my vdsm.log file. > >>> > >>> Any guidance appreciated. I'll try digging through the python code for > >>> service.py and see if I can catch it when the multipath configuration is > >>> in > >>> place to see the exact issue. > >>> > >>> -Bob > >>> > >>> On 05/13/2014 12:27 PM, Bob Doolittle wrote: > >>> > >>> Hi, > >>> > >>> I have started a new installation as specified in the 3.4.1 release notes > >>> (fresh Fedora 19 install, yum localinstall > >>> http://resources.ovirt.org/pub/yum-repo/ovirt-release34.rpm). > >>> > >>> This is failing in the step "Configuring the management bridge". > >>> > >>> Based on the vdsm.log, it appears I am hitting: > >>> Bug 988995 - vdsm multipath.py restarts mutipathd, cutting the branch vdsm > >>> sits on > >>> > >>> "multipath -F" is returning "invalid keyword: getuid_callout" and it > >>> appears that this is causing vdsm-tool to abort (although the command exit > >>> status is 0 and the bug report says that those are only harmless > >>> warnings). > >>> > >>> There is no workaround stated in that bug report. > >>> > >>> Help? > >>> > >>> -Bob > >>> > >>> > >> _______________________________________________ > >> Users mailing list > >> Users@ovirt.org > >> http://lists.ovirt.org/mailman/listinfo/users > >> > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users -- Med Vänliga Hälsningar ------------------------------------------------------------------------------- Karli Sjöberg Swedish University of Agricultural Sciences Box 7079 (Visiting Address Kronåsvägen 8) S-750 07 Uppsala, Sweden Phone: +46-(0)18-67 15 66 karli.sjob...@slu.se _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users