----- Original Message ----- > From: "John Joseph" <jjk_s...@yahoo.com> > To: users@ovirt.org > Sent: Sunday, May 10, 2015 2:37:39 PM > Subject: [ovirt-users] My feedback on network setting after installing OVirt > > Hi All, > > Like to give my feedback about how the network interface behaved after OVirt > I have used > > CentOS 6.6 64 bit, updated > > Ovirt stable from the repo > > Now after the installation, and configuration you get "ovirtmgmt" interface > and "ovirtmgmt" interface gets the IP address and everything is fine . Now > reboot it > > result is that when you give ifconfig , eth0 is not displayed and "ovirtmgmt" > do not have IP address > > This stage solved by giving ifconfig eth0 up > > and restarting the network, it will give "ovirtmgmt" an IP now
So you have to do this on every reboot? > > > > I tested it using different installation, with DHCP or manual configuration > for eth0 , in both the case the same experience Sounds a bit like [1]. Adding Petr, this bug's owner. Can you please check/post relevant conf/log files (ifcfg*, vdsm/system logs etc)? [1] https://bugzilla.redhat.com/show_bug.cgi?id=1154399 > > Giving my feedback, Thanks, -- Didi _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users