A CD drive, or a Floppy drive? The Quadra or Centris 610 should have both. Are the original disks on floppy, or CD? The SCSI id is set on the hard drive itself, usually by jumpers on the back or bottom. It's in binary, and I have always found it confuzing... No jumpers on it means ID 0. If your 610 still has the factory settings, the HD in it should be set to ID 0.
Cyrus Griffin -------------------- Hobbittech.com Mac Specialist - Low Cost Mac Services in AZ On Mar 20, 2009, at 2:54 PM, Doug wrote: > I have all the original disks that came with the computer but my > problem is I don’t have a drive to use with the computer. > > Doug > > From: [email protected] [mailto:[email protected] > ] On Behalf Of Brad McCartney > Sent: March 20, 2009 2:35 PM > To: [email protected] > Subject: Re: My Mac 610 has problemms > > Do you have an OS Disk/Floppy with disk tools, try verifying and > repairing the HDD, If this don't work you may need to re-install the > OS via re-formatting the HDD. If you are in need of another HDD, I > have a 250Mb SCSI HDD i'm not using. I also have a centris 610 on my > web site www.wizardtechs.com. > > On Fri, Mar 20, 2009 at 12:05 PM, Duggie <[email protected]> wrote: > > Having got my Mac running again after a layoff of eight years my Mac > is now having issues. When I turn it on it comes up with a disk in the > middle of the screen with a question mark blinking. I have triggered > the switch in the back and I get a sad Mac face with 0000000F and > under this a 0000000D. Does this mean that it is now just garbage or > is there something I can do. I did put in a new battery, and I did > start it up a few days ago and i actually had my hard drive from my > Mac Plus hooked in and going. I also had a CD Drive hooked in and > running but nada now. Any help ? > > Doug > > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.0.238 / Virus Database: 270.11.20/2013 - Release Date: > 03/20/09 06:59:00 > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
