Op een grimmige winterdag (Friday 14 January 2005 02:49),schreef
[EMAIL PROTECTED]:
> Automated smoke report for 5.9.2 patch 23792
> FAFNER: VAX 7000-720 (VAX/2 cpu)
> on openvms - V7.2
> using CC/DECC version 60490005
> smoketime 3 hours 24 minutes (average 1 hour 42 minutes)
>
> Summary: FAIL(M)
>
> O = OK F = Failure(s), extended report at the bottom
> X = Failure(s) under TEST but not under harness
> ? = still running or test results not (yet) available
> Build failures during: - = unknown or N/A
> c = Configure, m = make, M = make (after miniperl), t = make test-prep
>
> 23792 Configuration (common) none
> ----------- ---------------------------------------------------------
> M - M - -Duser_c_flags=/FLOAT=G_FLOAT
A manual build on this machine shows:
Making attrs (dynamic)
Writing Descrip.MMS for attrs
cp attrs.pm [--.lib]attrs.pm
MCR [--]miniperl.exe "-I[--.lib]" "-I[--.lib]" -e "use ExtUtils::Mksymlists;"
-e "Mksymlists('NAME' => 'attrs', 'DL_FUNCS' => { }, 'DL_VARS' => [],
'FUNCLIST' => [])"
MCR [--]miniperl.exe -e "print ""[--.lib.auto.attrs]attrs.olb/Include=attrs
\n[--.lib.auto.attrs]attrs.olb/Library\n"";" >>ATTRS.OPT
MCR [--]miniperl.exe -e "print qq{[--]PerlShr.exe/Share\n}" >>ATTRS.OPT
Copy/NoConfirm ATTRS.OPT [--.LIB.AUTO.ATTRS]ATTRS.OPT
MCR [--]miniperl.exe "-I[--.lib]" "-I[--.lib]" [--.lib.ExtUtils]xsubpp
-noprototypes -typemap [--.lib.ExtUtils]typemap ATTRS.xs >ATTRS.C
CC/DECC /Include=[]/Standard=Relaxed_ANSI/Prefix=All/Obj=.obj FLOAT/G_FLOAT/
Define=("VERSION=""1.01""","XS_VERSION=""1.01""")/Include=([--])/NoList
ATTRS.c
%DCL-W-MAXPARM, too many parameters - reenter command with fewer parameters
\ATTRS\
%MMK-F-ERRUPD, error status %X00038098 occurred when updating target ATTRS.OBJ
%MMK-F-ERRUPD, error status %X1C14803C occurred when updating target DYNEXT
HTH +
Good luck,
Abe
--
Yitzchak> Or did the "Thanks, applied" autoresponder miss it :)
Autoresponder busy studying Bulgarian EBCDIC locales. No, I'm
not making this up. I wish.
-- Jarkko Hietaniemi on p5p @ 2002-01-30
