What? Huh? ryan
On Mon, May 3, 2010 at 2:38 PM, Mark Dueck <m...@netking.bz> wrote: > Which CPE do you have? the SL2? You need to be on firmware 5.0.4. If > you are not, you will get this same issue, at least if your hardware > revision is v2. In v3 they upgraded the memory on the units. The > memory is too low and cannot accommodate the routing table - or > something like that. > > > On 05/03/2010 03:14 PM, Kosinet Wireless wrote: > > Well, kinda' > > > > It's ME -> UBNT 5.8 Bridge -> Switch -> Tranzeo AP ->Tranzeo CPE > > > > Client @ POP connected to switch with Router Works perfectly - Clent @ > > Tranzeo CPE with Router has problems. > > > > -Gary- > > > > ----- Original Message ----- > > From: "Ryan Spott" <rsp...@cspott.com> > > To: "WISPA General List" <wireless@wispa.org> > > Sent: Monday, May 03, 2010 5:09 PM > > Subject: Re: [WISPA] Tranzeo - Again..... > > > > > > > >> This smells of a layer 2.5 issue. > >> > >> Let me guess, the path looks like this: > >> > >> You -> AP -> CPE "acting like uplink" -> AP -> client. > >> > >> yeah.. Very well explained here: > >> < > >> > http://support.tranzeo.com/knowledgebase/users/kb.php?id=10038&category_id=0&sid2= > >> > >>> > >> I am looking through the 802.11-2007 spec from IEEE as this is a WLAN > >> issue, > >> not a Tranzeo Issue. (my wife calls it the > >> > "G**-D*****-ryan-these-customers-are-calling-because-you-used-the-poor-mans-repeater-again-go-put-a-freakin'-router-out-there-quit-being-so-cheap!!!!!) > >> > >> ryan > >> > >> > >> On Mon, May 3, 2010 at 1:49 PM, Kosinet Wireless > >> <wirel...@kosinet.com>wrote: > >> > >> > >>> Hey all, > >>> > >>> I've got what appears to me to be a dumb question, but I'm all out of > >>> good > >>> answers right now..... > >>> > >>> We've got mostly all Alvarion stuff on our WISP Network - All bridged, > >>> including the backhauls. The entire network is addressed @ 10.0.100.x > for > >>> management / monitoring purposes, and has been running fine. (Our > Public > >>> IP > >>> address space is 98.100.x.x) > >>> > >>> We recently added a Tranzeo AP, and (1) client at a new POP - Addressed > >>> them > >>> into our 10.0.100.x Network and set the client up. Signal is great, but > >>> we've had nothing but problems at this location. It will run for a > short > >>> while, then drop off, then come back, etc. (And on, and on......) While > >>> testing we discovered we can ping the 10.0.100.x address, and / or stay > >>> logged onto the radio consistently, but the Router on the Public IP > drops > >>> off. We've swapped Radios / Routers / Switches / Etc. - The only > constant > >>> is > >>> the Tranzeo link. (The Client at the POP that we're broadcasting from > >>> work > >>> flawlessly - It's a Ubiquity Bridge Link.) There's the scenario, here's > >>> the > >>> question. > >>> > >>> Is there a problem with me addressing the Tranzeo Radios in the > >>> 10.0.100.x????? Arp Table problems? > >>> > >>> -Gary- > >>> > >>> > >>> > >>> > >>> > -------------------------------------------------------------------------------- > >>> WISPA Wants You! Join today! > >>> http://signup.wispa.org/ > >>> > >>> > -------------------------------------------------------------------------------- > >>> > >>> WISPA Wireless List: wireless@wispa.org > >>> > >>> Subscribe/Unsubscribe: > >>> http://lists.wispa.org/mailman/listinfo/wireless > >>> > >>> Archives: http://lists.wispa.org/pipermail/wireless/ > >>> > >>> > >> > >> > -------------------------------------------------------------------------------- > >> WISPA Wants You! Join today! > >> http://signup.wispa.org/ > >> > -------------------------------------------------------------------------------- > >> > >> WISPA Wireless List: wireless@wispa.org > >> > >> Subscribe/Unsubscribe: > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > >> > >> > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
