Many thanks for the tests today. I run in the test with v1.9.0-rc4 r8642
With the weak signals today I did notice a problem.
During the QSO with K1JT, I was still repeating Tx3 when Joe informed me by
pingjockey that I was in the log.
Normally I would restart from Tx1 when I time out and have not seen the
RR73.
The Tx3 msg is repeated 12 times before it times out. I now understand that
the Fox gives up after 3 RR73 messages.
Question: Should Tx3 not stop after 3 or maybe 6 attempts? That would
trigger me to restart with Tx1.
After my QSO with G4WJS I changed my call for a 2nd test and ended up
transmitting on 14.074 and missed on a 2nd QSO.
Cause: When the menu is exited via an OK button then the frequency is
changed to the default frequency.
A configurable color for decodes of FT8 messages in Fox mode would be very
useful so that DXpedition mode can be identified and Dog mode enabled.
An easier method to switch to Hound mode and back would be nice. Maybe a
checkbox on the main window or an FT8-Hound option in the Mode drop down
menu.
When I entered a frequency in the "band box" of WSJT-X the "Enable Tx"
button is triggered. I now see that it is triggered by the Enter button.
That came a bit unexpected and made me wonder why my transmitter was
running... This also happens in other modes.
Question: Is tis intentional and can it be configured to ignore the nEter
button?
73,
Ton PA0TBR
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
