F2 is your friend. If 'Advanced" was the last active tab you you will be right there. That's a single key stroke! What's so hard about that?
73 -Jim NU0C On Sun, 21 Apr 2019 13:38:24 -0400 Frank Kirschner <[email protected]> wrote: > On Sat, Apr 20, 2019 at 10:53 PM WB5JJJ <[email protected]> wrote: > > > F/H is not something you would normally select on a frequent basis, > > > > Yes it is. I mostly do DX hunting, and around 10 to 15% of my QSOs have > been in F/H mode. Normally, I never respond to CQs from band-entities that > I already have confirmed on LoTW. If someone calls me while I'm working DX, > I will respond, but that requires turning off F/H mode before doing so. A > checkbox would make that easier. I certainly select or unselect F/H mode > more often than Hold Tx Freq or Call 1st, and there are checkboxes for > those. > > > so a check box cluttering the main screen is not necessary. > > > > As I pointed out, it wouldn't clutter the screen. There is ample room for > several more checkboxes. > > > > > As previously suggested setting a Configuration for that mode (and others) > > are just 2 clicks away and totally customizable. This procedure is > > outlined in the User Manual. It's simple and effective. > > > > Yes, that's an adequate workaround. But there are several selections > available on the screen that I don't normally change, and these could be > accessed through different configurations. Yet, they are on the main > screen. It's just a difference in operating style. > > > > WB5JJJ - George > > > > It was just a suggestion. Some people are not open to suggestions. > > Thanks for your input. > > 73, > Frank > KF6E > > > > > On Sat, Apr 20, 2019 at 7:44 PM Frank Kirschner <[email protected]> > > wrote: > > > >> Good idea. I'm not familiar enough with the program to have thought of > >> that. Thanks. > >> > >> 73, > >> Frank > >> KF6E > >> > >> On Sat, Apr 20, 2019 at 6:16 PM N3SL <[email protected]> wrote: > >> > >>> Just a suggestion - works for me: Create a F/H "configuration" and > >>> toggle to it. Two mouse clicks. > >>> > >>> On Sat, Apr 20, 2019 at 4:50 PM Frank Kirschner < > >>> [email protected]> wrote: > >>> > >>>> Between the Hold Tx Freq checkbox and the Call 1st checkbox, there is > >>>> room for several more checkboxes. One I would suggest is Fox/Hound mode. > >>>> I > >>>> would also suggest this automatically set Split to either Rig or Fake It, > >>>> which could be selected somewhere else. > >>>> > >>>> If the menus are turned off, it takes a while to turn them on and > >>>> navigate to the correct spot to set fox/hound and split mode. This > >>>> sometimes is long enough to miss a weak one. A checkbox would not only > >>>> make > >>>> it faster, but it would encourage using that mode for those who are still > >>>> learning FT8 operation. > >>>> > >>>> 73, > >>>> Frank > >>>> KF6E > >>>> _______________________________________________ > >>>> wsjt-devel mailing list > >>>> [email protected] > >>>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel > >>>> > >>> _______________________________________________ > >> wsjt-devel mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel > >> > > _______________________________________________ > > wsjt-devel mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
