Hi guys I hope someone can make sense of this as I've completely lost all decode on FT4.
During WWDIGI my log contained 250 odd QSO's all bands, most of those were on FT4. On Monday 1st sept, I set up N1MM + WSJT-X for the RSGB trial FT4 contest on 80m. I did some tests with a friend on the south coast and decoded ok with 100w. However afterward others called in and I could not decode them. During the RSGB trial FT4 contest (one hour duration) the waterfall was full of stations. I actually worked G4OGB early on but no other Stn was decoded though I could see plenty were calling me on the waterfall. I've reloaded 64bit software on an i7 Nuc, with Microham keyer, K3, with this setup I've worked a few Thousand QSO's. Please note Running just WSJT-X and FT8 decodes great. I tried this yesterday on 20m, switching to FT4 14080.00 lots of stn's active ....no decode!!! Regards Ken.. G0ORH Sent from my iPad _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
