The auto power on will change in the next release of WSJT-X.
If you want the rig to power on you'll have to provide a new switch
"--set-conf=auto_power_on=1
There is no auto power off yet but you can do that yourself by sending the
command "set_powerstat 0"
Mike W9MDB
On Friday, August 21, 2020, 11:05:58 AM CDT, [email protected]
<[email protected]> wrote:
Hello Everyone,
I use WSJT in command prompts so I can run multiple radios. It appears that
launching the software will actually turn the radio on. I have tried with the
IC-9700 and the IC-7610. Both radios turn on in the last state thy were used.
No complaints, I probably overlooked this somewhere. If this is new, I thought
I would share with everyone. Maybe a remote turn off as well someday?
73
Phil
N8LRG
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
