According to hamspots.net and pskreporter you are being seen.
Mike W9MDB
On Thursday, September 30, 2021, 10:39:29 AM CDT, Marco Calistri via
wsjt-devel <[email protected]> wrote:
Il 30/09/21 10:58, Bill Somerville via wsjt-devel ha scritto:
On 30/09/2021 14:36, Marco Calistri via wsjt-devel wrote:
CQRLOG now has been compiled with the chkvfo feature, settings adjusted as
suggested but again no AFSK going to radio rear data connector if I select mode
USB in WSJT-X, in order to transmit an FT8 signal I need to select DIG mode.
Then, the only possible solution IMHO should be that Hamlib being modified
accordingly in order to permits AFSK being usable for rear data connector in
SSB too and not just in DIG mode.
Marco,
DIG mode is the correct rig mode setting for AFSK digimodes when using the
FT-100.
There is no facility to select the Tx audio source other than the rig mode
settings with the FT-100.
73
Bill
G4WJS.
Hey Bill!
I've not doubts about what you say, but unluckily, due some reasons I'm not
aware of, if I select Mode Data/Pkt in WSJT-X, it looks like nobody station
being able to listen and consequently to answer to my calls.
Probably when I set Data/Pkt my radio transmit on a little shifted frequency
out of the center of the standard transmission FT8 frequency and this unallow
my signal to be heard.
---
73 de Marco, PY1ZRJ (former IK5BCU)
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
