Thank you Peter! I did not know that.
David, AK2L From: Peter Sumner via wsjt-devel <[email protected]> Sent: Monday, January 10, 2022 17:22 To: WSJT software development <[email protected]> Cc: Peter Sumner <[email protected]> Subject: Re: [wsjt-devel] wsjt-x v2.5.4 (configurations) Hi David (AK2L), this does not have to be the case, if you tick enable the setting "Monitor returns to last used frequency" in each of your configs on the main settings page, you may get a pleasant surprise. :-) regards, Peter, vk5pj On Tue, Jan 11, 2022 at 10:21 AM david--- via wsjt-devel <[email protected] <mailto:[email protected]> > wrote: Roger, When you switch modes as you described, WSJT-X will read the radio's current frequency, but will not automatically switch it for you. I see this all the time when I switch between FT4 and FT8. It is normal behavior and you will have to select the frequency you want from the combo box. David, AK2L -----Original Message----- From: Martin Davies G0HDB via wsjt-devel <[email protected] <mailto:[email protected]> > Sent: Monday, January 10, 2022 15:54 To: WSJT software development <[email protected] <mailto:[email protected]> > Cc: Martin Davies G0HDB <[email protected] <mailto:[email protected]> > Subject: Re: [wsjt-devel] wsjt-x v2.5.4 (configurations) On 10 Jan 2022 at 22:26, roger stafford via wsjt-devel wrote: > Hi > I use both ft8 and 165 on six meters a lot and of late have to swap between > the to modes often while trying to work dx. > So I set up 2 configurations which works well apart from the freq (ft8 313 > and qt65 275 which I have to change each time the rest of the settings are > saved every time. > Is this a fault my end ? or could it be changed to save the freq in the > config. > > Many thanks stay SAFE > > De roger vk3fz Hi Roger, for each configuration you can edit the frequency list so that it includes only the frequencies appropriate for that configuration's mode, ie. when you're in the FT8 configuration you could edit the frequency list so that it contains only the 313 (and I'd suggest the 323) frequencies, and similarly for the Q65 config. When you edit the frequency list you can 'tag' each frequency with the mode to which it's appropriate, rather than having 'All' selected for the mode. HTH, -- Martin G0HDB -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ wsjt-devel mailing list [email protected] <mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list [email protected] <mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
