Red Hat Linux release 7.1k (JinDo) Kernel 2.4.3-12 on an i686 login: root Password: Last login: Mon Mar 24 17:51:59 from 172.22.9.114 You have mail. bash: PATH: command not found [root@oocbd /root]# startx XFree86 Version 4.0.3 / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 16 March 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Operating System: Linux 2.2.17-8smp i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Tue Mar 25 09:17:59 2003 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (??) unknown. (==) ServerLayout "Anaconda Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "ATI Mach64" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) XKB: rules: "xfree86" (**) XKB: model: "pc105" (**) XKB: layout: "us" (**) FontPath set to "unix/:7100,/usr/X11R6/lib/X11/fonts/TrueType/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.0.3, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.0.3, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI:*(0:7:0) ATI Mach64 GR rev 39, Mem @ 0xfc000000/24, 0xfd101000/12, I/O @ 0x1400/8 (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="The XFree86 Project" compiled for 4.0.3, module version = 0.0.2 (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a (II) Module pex5: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.13.0 (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a (II) Module xie: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libxtt.a (II) Module xtt: vendor="X-TrueType Server Project" compiled for 4.0.3, module version = 1.3.0 (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o (II) Module ati: vendor="The XFree86 Project" compiled for 4.0.3, module version = 6.2.3 (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) ATI: ATI driver (version 6.2.3) for chipsets: ati, ativga (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI), ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI), ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (AGP), ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI), ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP), ATI Rage 128 Mobility ML (AGP) (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP) (II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o (II) Module ati: vendor="The XFree86 Project" compiled for 4.0.3, module version = 6.2.3 (==) ATI(0): Chipset: "ati". (**) ATI(0): Depth 16, (--) framebuffer bpp 16 (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) ATI(0): Primary V_BIOS segment is: 0xc000 (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) ATI(0): VESA BIOS detected (II) ATI(0): VESA VBE DDC supported (II) ATI(0): Manufacturer: HWP Model: 166d Serial#: 90901798 (II) ATI(0): Year: 1999 Week: 9 (II) ATI(0): EDID Version: 1.1 (II) ATI(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) ATI(0): Sync: Separate (II) ATI(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24 (II) ATI(0): Gamma: 2.28 (II) ATI(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) ATI(0): redX: 0.640 redY: 0.323 greenX: 0.295 greenY: 0.594 (II) ATI(0): blueX: 0.142 blueY: 0.066 whiteX: 0.283 whiteY: 0.298 (II) ATI(0): Supported VESA Video Modes: (II) ATI(0): 720x400@70Hz (II) ATI(0): 640x480@75Hz (II) ATI(0): 800x600@75Hz (II) ATI(0): 1024x768@75Hz (II) ATI(0): Manufacturer's mask: 0 (II) ATI(0): Supported Future Video Modes: (II) ATI(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) ATI(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) ATI(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) ATI(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) ATI(0): Supported additional Video Mode: (II) ATI(0): clock: 94.5 MHz Image Size: 306 x 230 mm (II) ATI(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_bo rder: 0 (II) ATI(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border : 0 (II) ATI(0): Monitor name: HP D5741A (II) ATI(0): Serial No: KR90901798 (II) ATI(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 70 kHz, PixCloc k max 110 kHz (--) ATI(0): ATI 3D Rage XL or XC graphics controller detected. (--) ATI(0): Chip type 4752 "GR", version 7, foundry TSMC, class 0, revision 0x0 0. (--) ATI(0): PCI bus interface detected; block I/O base is 0x1400. (--) ATI(0): ATI Mach64 adapter detected. (--) ATI(0): Internal RAMDAC (subtype 1) detected. (==) ATI(0): RGB weight 565 (==) ATI(0): Default visual is TrueColor (==) ATI(0): Using gamma correction (1.0, 1.0, 1.0) (II) ATI(0): Using Mach64 accelerator CRTC. (II) ATI(0): Using 8 MB linear aperture at 0xFC000000. (II) ATI(0): Using Block 0 MMIO aperture at 0xFD101400. (II) ATI(0): Using Block 1 MMIO aperture at 0xFD101000. (WW) ATI(0): Failed to set up write-combining range (0xfc000000,0x400000) (II) ATI(0): MMIO write caching enabled. (--) ATI(0): 4096 kB of SGRAM (2:1) 32-bit detected. (WW) ATI(0): Cannot shadow an accelerated frame buffer. (--) ATI(0): Internal programmable clock generator detected. (--) ATI(0): Reference clock 157.5/11 (14.318) MHz. (II) ATI(0): Monitor0: Using hsync range of 30.00-70.00 kHz (II) ATI(0): Monitor0: Using vrefresh range of 50.00-120.00 Hz (II) ATI(0): Maximum clock: 230.00 MHz (WW) ATI(0): Mode "1400x1050" deleted (hsync out of range) (WW) ATI(0): Mode "1400x1050" deleted (hsync out of range) (WW) ATI(0): Mode "1400x1050" deleted (hsync out of range) (WW) ATI(0): Default mode "1280x960" deleted (hsync out of range) (WW) ATI(0): Default mode "1280x1024" deleted (hsync out of range) (WW) ATI(0): Default mode "1280x1024" deleted (hsync out of range) (WW) ATI(0): Default mode "1600x1200" deleted (hsync out of range) (WW) ATI(0): Default mode "1600x1200" deleted (hsync out of range) (WW) ATI(0): Default mode "1600x1200" deleted (hsync out of range) (WW) ATI(0): Default mode "1600x1200" deleted (hsync out of range) (WW) ATI(0): Default mode "1600x1200" deleted (hsync out of range) (WW) ATI(0): Default mode "1792x1344" deleted (insufficient memory for mode) (WW) ATI(0): Default mode "1792x1344" deleted (insufficient memory for mode) (WW) ATI(0): Default mode "1856x1392" deleted (insufficient memory for mode) (WW) ATI(0): Default mode "1856x1392" deleted (insufficient memory for mode) (WW) ATI(0): Default mode "1920x1440" deleted (insufficient memory for mode) (WW) ATI(0): Default mode "1920x1440" deleted (insufficient memory for mode) (--) ATI(0): Virtual size is 1024x768 (pitch 1024) (**) ATI(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (--) ATI(0): Display dimensions: (32, 24) cm (--) ATI(0): DPI set to (81, 81) (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libcfb16.a (II) Module cfb16: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libcfb.a (II) Module cfb: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libmfb.a (II) Module mfb: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (WW) ATI(0): Failed to set up write-combining range (0xfc000000,0x400000) (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 12 256x256 slots (==) ATI(0): Backing store disabled (**) Mouse0: Protocol: "PS/2" (**) Mouse0: Core Pointer (==) Mouse0: Buttons: 3 (**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 (**) Mouse0: ZAxisMapping: buttons 4 and 5 (II) Keyboard "Keyboard0" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) Could not init font path element unix/:7100, removing from list! Fatal server error: could not open default font 'fixed' When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to xfree86@xfree86.org. XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining. [root@oocbd /root]#