I bitbaked core-image-sato-sdk It did not produce a tar.gz of the file system
I improvised and (-o loop) mounted the core-image-sato-sdk-atom-pc.ext3 at /home/autif/data/dev/projects/yocto/sysroot autif@hp8440w:~/data/dev/projects/yocto/sysroot$ ls bin dev home lost+found mnt sbin tmp var boot etc lib media proc sys usr I changed the environment file as follows (notice how sysroot is updated for all variables): export PATH=/opt/poky/1.1/sysroots/x86_64-pokysdk-linux/usr/bin:/opt/poky/1.1/sysroots/x86_64-pokysdk-linux/usr/bin/i586-poky-linux:$PATH export PKG_CONFIG_SYSROOT_DIR=/home/autif/data/dev/projects/yocto/sysroot export PKG_CONFIG_PATH=/home/autif/data/dev/projects/yocto/sysroot/usr/lib/pkgconfig export CONFIG_SITE=/opt/poky/1.1/site-config-i586-poky-linux export CC=i586-poky-linux-gcc export CXX=i586-poky-linux-g++ export GDB=i586-poky-linux-gdb export TARGET_PREFIX=i586-poky-linux- export CONFIGURE_FLAGS="--target=i586-poky-linux --host=i586-poky-linux --build=x86_64-linux --with-libtool-sysroot=/home/autif/data/dev/projects/yocto/sysroot" export CFLAGS=" -m32 -march=i586 --sysroot=/home/autif/data/dev/projects/yocto/sysroot" export CXXFLAGS=" -m32 -march=i586 --sysroot=/home/autif/data/dev/projects/yocto/sysroot" export LDFLAGS=" --sysroot=/home/autif/data/dev/projects/yocto/sysroot" export CPPFLAGS=" -m32 -march=i586 --sysroot=/home/autif/data/dev/projects/yocto/sysroot" export OECORE_NATIVE_SYSROOT="/opt/poky/1.1/sysroots/x86_64-pokysdk-linux" export OECORE_TARGET_SYSROOT="/home/autif/data/dev/projects/yocto/sysroot" export OECORE_ACLOCAL_OPTS="-I /opt/poky/1.1/sysroots/x86_64-pokysdk-linux/usr/share/aclocal" export OECORE_DISTRO_VERSION="1.1" export OECORE_SDK_VERSION="1.1" And I am still getting the same error. LD test-glib libtool: link: warning: library `/opt/poky/1.1/sysroots/i586-poky-linux/usr/lib/libgmodule-2.0.la' was moved. libtool: link: cannot find the library `=/usr/lib/libglib-2.0.la' or unhandled argument `=/usr/lib/libglib-2.0.la' make[4]: *** [test-glib] Error 1 make[4]: Leaving directory `/home/autif/data/dev/projects/yocto/mono-2.10.6/eglib/test' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home/autif/data/dev/projects/yocto/mono-2.10.6/eglib' make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/autif/data/dev/projects/yocto/mono-2.10.6/eglib' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/autif/data/dev/projects/yocto/mono-2.10.6' make: *** [all] Error 2 Command exited with non-zero status 2 7.05user 1.36system 0:12.62elapsed 66%CPU (0avgtext+0avgdata 60832maxresident)k 0inputs+37504outputs (0major+1185664minor)pagefaults 0swaps autif@hp8440w:~/data/dev/projects/yocto/mono-2.10.6$ set | grep FLAGS CFLAGS=' -m32 -march=i586 --sysroot=/home/autif/data/dev/projects/yocto/sysroot' CONFIGURE_FLAGS='--target=i586-poky-linux --host=i586-poky-linux --build=x86_64-linux --with-libtool-sysroot=/home/autif/data/dev/projects/yocto/sysroot' CPPFLAGS=' -m32 -march=i586 --sysroot=/home/autif/data/dev/projects/yocto/sysroot' CXXFLAGS=' -m32 -march=i586 --sysroot=/home/autif/data/dev/projects/yocto/sysroot' LDFLAGS=' --sysroot=/home/autif/data/dev/projects/yocto/sysroot' autif@hp8440w:~/data/dev/projects/yocto/mono-2.10.6$ set | grep CXX CXX=i586-poky-linux-g++ CXXFLAGS=' -m32 -march=i586 --sysroot=/home/autif/data/dev/projects/yocto/sysroot' autif@hp8440w:~/data/dev/projects/yocto/mono-2.10.6$ set | grep CC CC=i586-poky-linux-gcc SLAVE NONE ACCEPT' -- "$cur" )); COMPREPLY=($( compgen -W 'ACCEPT DROP LOG ULOG REJECT \ COMPREPLY=($( compgen -W 'ACCEPT DROP LOG ULOG REJECT \ COMPREPLY=($( compgen -W 'ACCEPT DROP LOG ULOG REJECT \ autif@hp8440w:~/data/dev/projects/yocto/mono-2.10.6$ ls /home/autif/data/dev/projects/yocto/sysroot Please advise. Did I set the environment correctly? Thanks Autif On Thu, Nov 10, 2011 at 11:24 PM, Zhang, Jessica <jessica.zh...@intel.com> wrote: > Hi Autif, > > It seems the libgmodule-2.0.la is missing from the 1.1 tarball sysroot but > I've checked it does exist under the sysroot that extracted from the > core-image-sato-sdk image. So, you have to do the following steps: > 1. bitbake core-image-sato-sdk > 2. source the environment-setup script under /opt/poky/1.1 > 3. Run runqemu-extract-sdk against the built out image file, it should be > under your .../build/tmp/deploy/image/core-image-sato-sdk.tar.bz2 and the > directory you want the sysroot to be extracted to e.g. $HOME/qemux86 > 4. change your sysroot setting to point to the newly created sysroot > directory. > > Or, you can following the ADT manual and using the part that use > adt-installer to setup your cross development environment. > > Hope these can get you going. > > Jessica > > -----Original Message----- > From: yocto-boun...@yoctoproject.org [mailto:yocto-boun...@yoctoproject.org] > On Behalf Of autif khan > Sent: Thursday, November 10, 2011 6:44 PM > To: yocto@yoctoproject.org > Subject: [yocto] Trying to cross compile Mono - glib link error > > I followed the instructions and installed the ADT from the 1.1 tarball > as outlined in documentation. And tested a few simple GTK apps. > Everything worked well. > > After that I am trying to cross compile mono and I am getting the > following error: > > LD test-glib > libtool: link: warning: library > `/opt/poky/1.1/sysroots/i586-poky-linux/usr/lib/libgmodule-2.0.la' was > moved. > libtool: link: cannot find the library `=/usr/lib/libglib-2.0.la' or > unhandled argument `=/usr/lib/libglib-2.0.la' > make[4]: *** [test-glib] Error 1 > make[4]: Leaving directory > `/home/autif/data/dev/projects/yocto/mono-2.10.6/eglib/test' > make[3]: *** [all-recursive] Error 1 > make[3]: Leaving directory > `/home/autif/data/dev/projects/yocto/mono-2.10.6/eglib' > make[2]: *** [all] Error 2 > make[2]: Leaving directory > `/home/autif/data/dev/projects/yocto/mono-2.10.6/eglib' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory `/home/autif/data/dev/projects/yocto/mono-2.10.6' > make: *** [all] Error 2 > > compiler flags seem to look fine > > autif@hp8440w:~/data/dev/projects/yocto/mono-2.10.6$ set | grep LD > BUILDDIR=/home/autif/data/dev/projects/yocto/poky-edison-6.0/build > LDFLAGS=' --sysroot=/opt/poky/1.1/sysroots/i586-poky-linux' > OLDPWD=/home/autif/data/dev/projects/yocto > > autif@hp8440w:~/data/dev/projects/yocto/mono-2.10.6$ set | grep CPP > CPPFLAGS=' -m32 -march=i586 > --sysroot=/opt/poky/1.1/sysroots/i586-poky-linux' > > autif@hp8440w:~/data/dev/projects/yocto/mono-2.10.6$ set | grep CXX > CXX=i586-poky-linux-g++ > CXXFLAGS=' -m32 -march=i586 > --sysroot=/opt/poky/1.1/sysroots/i586-poky-linux' > > autif@hp8440w:~/data/dev/projects/yocto/mono-2.10.6$ set | grep FLAGS > CFLAGS=' -m32 -march=i586 --sysroot=/opt/poky/1.1/sysroots/i586-poky-linux' > CONFIGURE_FLAGS='--target=i586-poky-linux --host=i586-poky-linux > --build=x86_64-linux > --with-libtool-sysroot=/opt/poky/1.1/sysroots/i586-poky-linux' > CPPFLAGS=' -m32 -march=i586 > --sysroot=/opt/poky/1.1/sysroots/i586-poky-linux' > CXXFLAGS=' -m32 -march=i586 > --sysroot=/opt/poky/1.1/sysroots/i586-poky-linux' > LDFLAGS=' --sysroot=/opt/poky/1.1/sysroots/i586-poky-linux' > > Please advise. > > Thanks! > > Autif > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto