The FRI2 does not require R8169 or PATA support. It does not need SFF or GENERIC ATA options either.
The FRI2 does require IEEE802154 (Zigbee), BT (Bluetooth), and IWLWIFI. The latter is compiled as a module to avoid the need for an initrd containing the firmware blobs. Signed-off-by: Darren Hart <dvh...@linux.intel.com> --- meta/cfg/kernel-cache/bsp/fri2/fri2.cfg | 16 ++++++++++++---- 1 files changed, 12 insertions(+), 4 deletions(-) diff --git a/meta/cfg/kernel-cache/bsp/fri2/fri2.cfg b/meta/cfg/kernel-cache/bsp/fri2/fri2.cfg index b101419..97ceecd 100644 --- a/meta/cfg/kernel-cache/bsp/fri2/fri2.cfg +++ b/meta/cfg/kernel-cache/bsp/fri2/fri2.cfg @@ -5,16 +5,12 @@ CONFIG_PRINTK=y # Basic hardware support for the box - network, USB, PCI, sound CONFIG_NETDEVICES=y CONFIG_ATA=y -CONFIG_ATA_GENERIC=y -CONFIG_ATA_SFF=y CONFIG_PCI=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_USB_SUPPORT=y CONFIG_USB=y CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_R8169=y -CONFIG_PATA_SCH=y CONFIG_MMC_SDHCI_PCI=y CONFIG_USB_EHCI_HCD=y CONFIG_PCIEPORTBUS=y @@ -42,3 +38,15 @@ CONFIG_MODULES=y CONFIG_SHMEM=y CONFIG_TMPFS=y CONFIG_PACKET=y + +# Enable FRI2 Specific Hardware +# Zigbee 802.15.4 Support +CONFIG_IEEE802154=y +# CONFIG_IEEE802154_6LOWPAN is not set + +# Bluetooth Support +CONFIG_BT=y + +# Intel 6205 ABGN +# Build as a module to avoid having to install the firmware into the initrd +CONFIG_IWLWIFI=m -- 1.7.5.4 _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
