On Tue, 2012-06-19 at 10:13 -0500, Dallas Clement wrote: > Hi Tom, > > The first thing I tried is building a minimal distro with "bitbake > core-image-minimal". That completed successfully and I was able to > execute it with qemu. > > Then I tried to build a bsp for ARM, which failed with errors shown > earlier. I just tried now for x86_64. It failed too with the same > errors. > > I am using the latest poky tarball - poky-denzil-7.0.tar.bz2 >
OK, so what you did was successfully build a minimal image from the BSP tarball for x86-64, but that wasn't using a BSP generated from yocto-bsp, since you haven't been able to successfully generate a BSP using yocto-bsp yet. If that's not the case please clarify, otherwise I'll try what you're doing using the denzil tarball... Tom > Thanks, > > Dallas > > On Tue, Jun 19, 2012 at 10:03 AM, Tom Zanussi <tom.zanu...@intel.com> wrote: > > On Tue, 2012-06-19 at 09:37 -0500, Dallas Clement wrote: > >> Hi all, Please bear with me as I am a newb to both yocto and building > >> bsp's. I was able to run bitbake core-image-minimal for x86-64, just > >> fine and > >> run it in qemu. > >> > >> Then I got gutsy and tried to build a bsp for ARM. Didn't go so well. > >> I must be missing something. > >> > > > > Hi, > > > > So if I read the above correctly, you were able to create a new x86-64 > > bsp using yocto-bsp and build and boot the minimal image? > > > > If so, then the below should also work - at the point you are in the > > creation script, there's nothing arm-specific yet. > > > > If not, did you source oe-init-build-env first? Or do you have some > > kind of network problem? > > > > I can't think of anything else - I just tried the same thing here and it > > worked fine. Let me also try the same thing but using the denzil > > tarball (using git denzil branch), which is what I assume your using? > > > > Thanks, > > > > Tom > > > >> dallasc ~/development/yocto/poky-denzil-7.0] scripts/yocto-bsp create > >> marvell-armada-xp-mv78260 qemu > >> Which qemu architecture would you like to use? [default: i386] > >> 1) i386 (32-bit) > >> 2) x86_64 (64-bit) > >> 3) ARM (32-bit) > >> 4) PowerPC (32-bit) > >> 5) MIPS (32-bit) > >> 3 > >> Would you like to use the default (3.2) kernel? (y/n) [default: y] > >> Do you need a new machine branch for this BSP (the alternative is to > >> re-use an existing branch)? [y/n] [default: y] > >> Getting branches from remote repo None... > >> Traceback (most recent call last): > >> File "scripts/yocto-bsp", line 137, in <module> > >> ret = main() > >> File "scripts/yocto-bsp", line 132, in main > >> invoke_subcommand(args, parser, yocto_bsp_help_usage, subcommands) > >> File "/development/dallasc/yocto/poky-denzil-7.0/scripts/lib/bsp/help.py", > >> line 73, in invoke_subcommand > >> subcommands.get(args[0], subcommand_error)[0](args[1:], usage) > >> File "scripts/yocto-bsp", line 76, in yocto_bsp_create_subcommand > >> yocto_bsp_create(machine, karch, scripts_path, bsp_output_dir, > >> options.codedump, options.properties_file) > >> File > >> "/development/dallasc/yocto/poky-denzil-7.0/scripts/lib/bsp/engine.py", > >> line 1243, in yocto_bsp_create > >> run_program_lines(program_lines, codedump) > >> SyntaxError: function specified for 'gen' property returned nothing : > >> input type:"choicelist" name:"new_kbranch" > >> gen:"bsp.kernel.all_branches" prio:"20" msg:"Please choose a machine > >> branch to base this BSP on:" default:"standard/default" > >> > >> Can anyone recommend what I should do to get past this? > >> > >> Thanks, > >> > >> Dallas > >> _______________________________________________ > >> yocto mailing list > >> yocto@yoctoproject.org > >> https://lists.yoctoproject.org/listinfo/yocto > > > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto