Hello! Am Mi, 12/05/2012 19:17, hat Philip Balister <phi...@balister.org> geschrieben: > On 12/05/2012 05:21 AM, Andreas Schweigstill wrote: > > meta-zynq/recipes-kernel-linux-zynq contains the following lines: > > LINUX_VERSION ?= "3.5" > > LINUX_VERSION_EXTENSION ?= "-xilinx" > > > > How can I force Yocto to build kernel 3.5-xilinx? > > Urg, I'll have to take a look at that.
After changing the order of BBLAYERS in build/conf/local.conf to meta, meta-zynq, meta-yocto, meta-yocto-bsp and using Hob to select MACHINE=zynq-zc702, base image=zc702-proto-image everything works fine. Now I get a proper toolchain for Cortex A9 and a kernel named zynq-zc702 3.5.0-14.3-build1-yocto-standard which is properly running on my ZC702 board. > Also, you'll need an updated fsbl in the BOOT.BIN file to work with the > later kernels. We should probably post one somewhere, although I wish > the fsbl license was a little less restrictive. I haven't built a BOOT.BIN file with Yocto based U-Boot yet. Instead I'm using U-Boot from Petalinux 12.9 which is configured to use the QSPI Flash to store its environment. Currently I boot from QSPI Flash, load kernel und DTB files via TFTP and use a root filesystem stored on a SD card. ;-) Regards, Andreas Schweigstill -- Dipl.-Phys. Andreas Schweigstill Schweigstill IT | Embedded Systems Schauenburgerstraße 116, D-24118 Kiel, Germany Phone: (+49) 431 530354-35, Fax: (+49) 431 530354-36 Mobile: (+49) 171 6921973, Web: http://www.schweigstill.de/ _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto