If by "package updating" you mean migrating to a newer release, I would suggest you consult the reference manual section on this:
http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#migration Cheers, Paul PS please keep replies on-list, thanks. On Friday 27 February 2015 17:05:18 you wrote: > ya thank you, i will switch to new version, but now i almost come to near > of end. most of the time i confuse with package updating in yocto project, > so please give you the steps for learning? > > On 27 February 2015 at 16:46, Paul Eggleton <paul.eggle...@linux.intel.com> > > wrote: > > On Friday 27 February 2015 13:20:28 Parthiban Kandasamy wrote: > > > i run yocto build on opensuse 12.3 which have version of make is 4.0 but > > > > my > > > > > yocto project has version of 3.82.so it shows "checking version of > > > > make... > > > > > 4.0, bad". > > > > > > and other error logs are: > > > > > > ERROR: Function failed: do_configure (log file is located at > > > > /home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagleboard-dora > > -1 > > > > 0.0.0/BeagleBuild/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/eglibc-initi > > al> > > > /2.18-r0/temp/log.do_configure.9059) ERROR: Logfile of failure stored in: > > /home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagleboard-dora > > -1 > > > > 0.0.0/BeagleBuild/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/eglibc-initi > > al> > > > /2.18-r0/temp/log.do_configure.9059 > > > > > > Log data follows: > > > | DEBUG: Executing python function sysroot_cleansstate > > > | DEBUG: Python function sysroot_cleansstate finished > > > | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', > > > > > > 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', > > > > 'common'] > > > > > | DEBUG: Executing shell function autotools_preconfigure > > > | DEBUG: Shell function autotools_preconfigure finished > > > | DEBUG: Executing shell function do_configure > > > | checking build system type... x86_64-pc-linux-gnu > > > | checking host system type... arm-poky-linux-gnueabi > > > | checking for arm-poky-linux-gnueabi-gcc... arm-poky-linux-gnueabi-gcc > > > > > > -march=armv7-a -mthumb-interwork -mfloat-abi=softfp -mfpu=neon > > > > --sysroot=/home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagle > > bo> > > > ard-dora-10.0.0/BeagleBuild/tmp/sysroots/beagleboard > > > > > > | checking for suffix of object files... o > > > | checking whether we are using the GNU C compiler... yes > > > | checking whether arm-poky-linux-gnueabi-gcc -march=armv7-a > > > > > > -mthumb-interwork -mfloat-abi=softfp -mfpu=neon > > > > --sysroot=/home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagle > > bo> > > > ard-dora-10.0.0/BeagleBuild/tmp/sysroots/beagleboard accepts -g... yes > > > > > > | checking for gcc... gcc > > > | checking whether we are using the GNU C++ compiler... no > > > | checking whether arm-poky-linux-gnueabi-g++ -march=armv7-a > > > > > > -mthumb-interwork -mfloat-abi=softfp -mfpu=neon > > > > --sysroot=/home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagle > > bo> > > > ard-dora-10.0.0/BeagleBuild/tmp/sysroots/beagleboard accepts -g... no > > > > > > | checking for arm-poky-linux-gnueabi-readelf... > > > > > > arm-poky-linux-gnueabi-readelf > > > > > > | checking for sysdeps preconfigure fragments... x86_64 > > > | configure: running configure fragment for add-on libidn > > > | configure: running configure fragment for add-on nptl > > > | checking add-on ports for preconfigure fragments... aarch64 alpha am33 > > > > > > arm configure: Found compiler is configured for armv7 > > > > > > | hppa ia64 m68k microblaze mips powerpc tile > > > | checking for assembler and linker STT_GNU_IFUNC support... yes > > > | checking whether .text pseudo-op must be used... yes > > > | checking sysdep dirs... ports/sysdeps/unix/sysv/linux/arm/nptl > > > > > > ports/sysdeps/unix/sysv/linux/arm nptl/sysdeps/unix/sysv/linux > > > nptl/sysdeps/pthread sysdeps/pthread ports/sysdeps/unix/sysv/linux > > > sysdeps/unix/sysv/linux sysdeps/gnu sysdeps/unix/inet > > > nptl/sysdeps/unix/sysv ports/sysdeps/unix/sysv sysdeps/unix/sysv > > > ports/sysdeps/unix/arm nptl/sysdeps/unix ports/sysdeps/unix sysdeps/unix > > > sysdeps/posix ports/sysdeps/arm/armv7/multiarch ports/sysdeps/arm/armv7 > > > ports/sysdeps/arm/armv6t2 ports/sysdeps/arm/armv6 ports/sysdeps/arm/nptl > > > ports/sysdeps/arm ports/sysdeps/arm/soft-fp sysdeps/wordsize-32 > > > sysdeps/ieee754/flt-32 sysdeps/ieee754/dbl-64 sysdeps/ieee754 > > > sysdeps/generic > > > > > > | checking for a BSD-compatible install... /usr/bin/install -c > > > | checking whether ln -s works... yes > > > | checking whether > > > > /home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagleboard-dora > > -1 > > > > 0.0.0/BeagleBuild/tmp/sysroots/x86_64-linux/usr/libexec/armv7a-vfp-neon-po > > ky> > > > -linux-gnueabi.gcc-cross-initial/gcc/arm-poky-linux-gnueabi/4.8.1/as is > > > > GNU > > > > > as... yes > > > > > > | checking whether > > > > /home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagleboard-dora > > -1 > > > > 0.0.0/BeagleBuild/tmp/sysroots/x86_64-linux/usr/libexec/armv7a-vfp-neon-po > > ky> > > > -linux-gnueabi.gcc-cross-initial/gcc/arm-poky-linux-gnueabi/4.8.1/ld is > > > > GNU > > > > > ld... yes > > > > > > | checking for > > > > /home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagleboard-dora > > -1 > > > > 0.0.0/BeagleBuild/tmp/sysroots/x86_64-linux/usr/libexec/armv7a-vfp-neon-po > > ky> > > > -linux-gnueabi.gcc-cross-initial/gcc/arm-poky-linux-gnueabi/4.8.1/as... > > > > /home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagleboard-dora > > - > > > > 10.0.0/BeagleBuild/tmp/sysroots/x86_64-linux/usr/libexec/armv7a-vfp-neon-p > > ok> > > > y-linux-gnueabi.gcc-cross-initial/gcc/arm-poky-linux-gnueabi/4.8.1/as > > > > > > | checking version of > > > > /home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagleboard-dora > > -1 > > > > 0.0.0/BeagleBuild/tmp/sysroots/x86_64-linux/usr/libexec/armv7a-vfp-neon-po > > ky> > > > -linux-gnueabi.gcc-cross-initial/gcc/arm-poky-linux-gnueabi/4.8.1/as... > > > 2.23.2, ok > > > > > > | checking for > > > > /home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagleboard-dora > > -1 > > > > 0.0.0/BeagleBuild/tmp/sysroots/x86_64-linux/usr/libexec/armv7a-vfp-neon-po > > ky> > > > -linux-gnueabi.gcc-cross-initial/gcc/arm-poky-linux-gnueabi/4.8.1/ld... > > > > /home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagleboard-dora > > - > > > > 10.0.0/BeagleBuild/tmp/sysroots/x86_64-linux/usr/libexec/armv7a-vfp-neon-p > > ok> > > > y-linux-gnueabi.gcc-cross-initial/gcc/arm-poky-linux-gnueabi/4.8.1/ld > > > > > > | checking version of > > > > /home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagleboard-dora > > -1 > > > > 0.0.0/BeagleBuild/tmp/sysroots/x86_64-linux/usr/libexec/armv7a-vfp-neon-po > > ky> > > > -linux-gnueabi.gcc-cross-initial/gcc/arm-poky-linux-gnueabi/4.8.1/ld... > > > 2.23.2, ok > > > > > > | checking for arm-poky-linux-gnueabi-gcc... (cached) > > > > > > arm-poky-linux-gnueabi-gcc -march=armv7-a -mthumb-interwork > > > -mfloat-abi=softfp -mfpu=neon > > > > --sysroot=/home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagle > > bo> > > > ard-dora-10.0.0/BeagleBuild/tmp/sysroots/beagleboard > > > > > > | checking version of arm-poky-linux-gnueabi-gcc -march=armv7-a > > > > > > -mthumb-interwork -mfloat-abi=softfp -mfpu=neon > > > > --sysroot=/home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagle > > bo> > > > ard-dora-10.0.0/BeagleBuild/tmp/sysroots/beagleboard... 4.8.1, ok > > > > > > | checking for gnumake... make > > > | checking version of make... 4.0, bad > > > | checking for gnumsgfmt... no > > > | checking for gmsgfmt... no > > > | checking for msgfmt... msgfmt > > > | checking version of msgfmt... 0.18.3, ok > > > | checking for makeinfo... makeinfo > > > | checking version of makeinfo... 4.13, ok > > > | checking for sed... sed > > > | checking version of sed... 4.2.2, ok > > > | checking for gawk... gawk > > > | checking version of gawk... 4.1.1, ok > > > | checking for arm-poky-linux-gnueabi-nm... arm-poky-linux-gnueabi-nm > > > | checking for autoconf... autoconf > > > | checking whether autoconf works... yes > > > | configure: error: > > > | *** These critical programs are missing or too old: make > > > | *** Check the INSTALL file for required versions. > > > > > | WARNING: > > /home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagleboard-dora > > -1 > > > > 0.0.0/BeagleBuild/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/eglibc-initi > > al> > > > /2.18-r0/temp/run.do_configure.9059:1 exit 1 from > > > > /home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagleboard-dora > > -1 > > > > 0.0.0/BeagleBuild/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/eglibc-initi > > al> > > > /2.18-r0/eglibc-2.18/libc/configure --host=arm-poky-linux-gnueabi > > > --build=x86_64-linux --prefix=/usr > > > --without-cvs --disable-sanity-checks > > > > --with-headers=/home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/b > > ea> > > > gleboard-dora-10.0.0/BeagleBuild/tmp/sysroots/beagleboard/usr/include > > > > --with-kconfig=/home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/b > > e > > > > > agleboard-dora-10.0.0/BeagleBuild/tmp/sysroots/x86_64-linux/usr/bin > > > --enable-hacker-mode --enable-addons > > > > > > | ERROR: Function failed: do_configure (log file is located at > > > > /home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagleboard-dora > > -1 > > > > 0.0.0/BeagleBuild/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/eglibc-initi > > al> > > > /2.18-r0/temp/log.do_configure.9059) ERROR: Task 568 > > > > (/home/parthiban/UliveSytems/Parthiban/CODE/OpenSource/BSP/beagleboard-dor > > a-> > > > 10.0.0/meta/recipes-core/eglibc/ eglibc-initial_2.18.bb, do_configure) > > > failed with exit code '1' > > > > > > how do i configure yocto project to overcome this error? > > > > No configuration will help you fix this. However you can install the > > buildtools > > as described in the manual if your host tools aren't compatible. > > > > As always, we strongly recommend a newer release since this one is no > > longer > > officially supported. > > > > Cheers, > > Paul > > > > -- > > > > Paul Eggleton > > Intel Open Source Technology Centre -- Paul Eggleton Intel Open Source Technology Centre -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto