On Mon, Jun 19, 2017 at 8:46 PM, Riko Ho <antonius.r...@gmail.com> wrote: > I got all the files needed, but now I get no response from the dongle when I > plug it,
you might want to check logs and see if there are udev events generated on insertion. > > Here's the files on the board : > root@beaglebone:/lib/firmware/rtlwifi# ls > rtl8188efw.bin rtl8192eu_ap_wowlan.bin rtl8723bs_bt.bin > rtl8188eufw.bin rtl8192eu_nic.bin rtl8723bs_nic.bin > rtl8192cfw.bin rtl8192eu_wowlan.bin rtl8723bs_wowlan.bin > rtl8192cfwU.bin rtl8192sefw.bin rtl8723bu_ap_wowlan.bin > rtl8192cfwU_B.bin rtl8712u.bin rtl8723bu_nic.bin > rtl8192cufw.bin rtl8723aufw_A.bin rtl8723bu_wowlan.bin > rtl8192cufw_A.bin rtl8723aufw_B.bin rtl8723fw.bin > rtl8192cufw_B.bin rtl8723aufw_B_NoBT.bin rtl8723fw_B.bin > rtl8192cufw_TMSC.bin rtl8723befw.bin rtl8821aefw.bin > rtl8192defw.bin rtl8723befw_36.bin rtl8821aefw_29.bin > rtl8192eefw.bin rtl8723bs_ap_wowlan.bin rtl8821aefw_wowlan.bin > > > On 20/06/17 03:57, Khem Raj wrote: > > On Sun, Jun 18, 2017 at 8:00 PM, Riko Ho <antonius.r...@gmail.com> wrote: > > Hello Everyone, > > How can I obtain : rtl8192eu_nic.bin? > > I got this message : > > RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 > usb 1-1: RTL8192EU MAC: 00:0b:81:a2:a5:60 > usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin > usb 1-1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with > error -2 > usb 1-1: request_firmware(rtlwifi/rtl8192eu_nic.bin) failed > > you probably need to add the nonfree firmware bits something like this > > https://github.com/resin-os/meta-resin/blob/master/meta-resin-common/recipes-kernel/linux-firmware/linux-firmware_git.bbappend > > and > > https://github.com/resin-os/meta-resin/blob/master/meta-resin-common/recipes-kernel/rtl8192cu/rtl8192cu_4.0.2_9000.bb > > might help > > Thanks, > > On 18/06/17 15:49, Martin Jansa wrote: > > You didn't say which versions you're using. > > If you're using latest oe-core with gcc7 then you will need v3 version of > this change: > http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html > I'll send it later today. > > And how can I clean after building it ? It took about 70Gb of my drive > > Like any other recipe: > bitbake -c clean foo > > On Sun, Jun 18, 2017 at 1:41 AM, Riko Ho <antonius.r...@gmail.com> wrote: > > Hello Everyone, > > I tried to compile chromium but never succeeded, took me already 12 hours > and stopped on 99%, > I used bitbake for doing it, > > Is chromium not compatible with arm CPU ? it was working with X86_64 > before. > And how can I clean after building it ? It took about 70Gb of my drive > > Thanks > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > > > -- > > /*******/ > Sent by Ubuntu LTS 16.04, > 谢谢, > Regards, > Riko Ho > /*******/ > > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > > > -- > > /*******/ > Sent by Ubuntu LTS 16.04, > 谢谢, > Regards, > Riko Ho > /*******/ -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto