overlapdial=yes in zapata.conf/chan_dahdi.conf google it out Martin
On Fri, Oct 30, 2009 at 6:54 AM, Vieri <rentor...@yahoo.com> wrote: > Hi, > > I have a PRI euroisdn link between an Alcatel PBX and Asterisk. > > I'm having some trouble with overlap dialing. > > Suppose I dial '874053' from an Alcatel extension ('7034') where '87' is an > Alcatel prefix of type "ARS Prof.Trg Grp Seiz.with overlap". > > I'm expecting Asterisk to receive '1004053' (where '100' is a prefix which > always shows up in the euroisdn setup). > > However, Asterisk is only receiving '1004' which means that it's not reading > the digits that follow. > > Are there issues with "receiving" overlap dials from zap channels? > > According to the Alcatel trace below, it looks like Asterisk is accepting the > call before a "Sending complete" is released by Alcatel. > > I'm using libpri 1.2.8 and Asterisk 1.2.31.1. > > Alcatel trace: > >> t3 > --> Cleaning mtracer... > --> Positionning t3 filters... > +--------+-------+--------+--------+---------+---------+----------+------+ > | filter | desti | src_id | cr_nbr | cpl_nbr | us_term | term_nbr | type | > +--------+-------+--------+--------+---------+---------+----------+------+ > | 0 | ** | ** | * | ** | * | *** | 165 | > | 1 | ** | ** | * | ** | * | *** | 166 | > | 2 | ** | ** | * | ** | * | *** | 167 | > | 3 | | | | | | | | > | 4 | | | | | | | | > | 5 | | | | | | | | > | 6 | | | | | | | | > | 7 | | | | | | | | > +--------+-------+--------+--------+---------+---------+----------+------+ > Traces Analyser activated > > mtracer started ... > (476142:000001) MTRACER ♠©, version: R9.0-h1.301-31-d-es-c7s2 > (476142:000001) MTRACER num: 007, time: 2009/10/30 11:53:02, loss: 0% > ______________________________________________________________________________ > | (476157:000002) 1095: Send_IO1 (link-nbr=19, sapi=0, tei=0) : > | long: 51 desti: 0 source: 15 cryst: 0 cpl: 19 us: 8 term: 0 type a5 > | tei: 0 <<<< message sent : SETUP [05] Call ref : 32 a8 > |______________________________________________________________________________ > | > | IE:[04] BEARER_CAPABILITY (l=3) 80 90 a3 > | IE:[18] CHANNEL (l=3) a9 83 9b -> T2 : B channel 27 exclusive > | IE:[1e] PROGRESS_ID (l=2) 80 83 > | IE:[6c] CALLING_NUMBER (l=6) -> 00 81 Num : 7034 > | IE:[70] CALLED_NUMBER (l=5) -> 80 Num : 1004 > | IE:[7d] HLC (l=2) 91 81 > |______________________________________________________________________________ > > ______________________________________________________________________________ > | (476157:000003) Concatenated-Physical-Event : > | long: 24 desti: 0 source: 0 cryst: 0 cpl: 19 us: 0 term: 0 type a5 > | tei: 0 >>>> message received : CALL PROC (02) Call ref : b2 a8 > |______________________________________________________________________________ > | > | IE:[18] CHANNEL (l=4) e9 81 83 9b > |______________________________________________________________________________ > > ______________________________________________________________________________ > | (476157:000004) Concatenated-Physical-Event : > | long: 28 desti: 0 source: 0 cryst: 0 cpl: 19 us: 0 term: 0 type a5 > | tei: 0 >>>> message received : CONNECT (07) Call ref : b2 a8 > |______________________________________________________________________________ > | > | IE:[18] CHANNEL (l=4) e9 81 83 9b > | IE:[1e] PROGRESS_ID (l=2) 81 82 > |______________________________________________________________________________ > > ______________________________________________________________________________ > | (476158:000005) 1095: Send_IO1 (link-nbr=19, sapi=0, tei=0) : > | long: 23 desti: 0 source: 15 cryst: 0 cpl: 19 us: 8 term: 0 type a5 > | tei: 0 <<<< message sent : CONNECT ACK (0f) Call ref : 32 a8 > |______________________________________________________________________________ > | > | IE:[18] CHANNEL (l=3) a9 83 9b -> T2 : B channel 27 exclusive > |______________________________________________________________________________ > > > In Asterisk I see: > > Oct 30 11:48:02 VERBOSE[11329] logger.c: -- Accepting call from '7034' to > '1004' on channel 1/27, span 1 > > If I change the Alcatel 87 prefix to use "ARS Prof.Trg Grp Seizure" (without > overlap) then I get the following trace: > > ______________________________________________________________________________ > | (488410:000060) 1093: Send_IO1 (link-nbr=19, sapi=0, tei=0) : > | long: 55 desti: 0 source: 15 cryst: 0 cpl: 19 us: 8 term: 0 type a5 > | tei: 0 <<<< message sent : SETUP [05] Call ref : 33 52 > |______________________________________________________________________________ > | > | IE:[04] BEARER_CAPABILITY (l=3) 80 90 a3 > | IE:[18] CHANNEL (l=3) a9 83 8a -> T2 : B channel 10 exclusive > | IE:[1e] PROGRESS_ID (l=2) 80 83 > | IE:[6c] CALLING_NUMBER (l=6) -> 00 81 Num : 7034 > | IE:[70] CALLED_NUMBER (l=8) -> 80 Num : 1004053 > | IE:[7d] HLC (l=2) 91 81 > | [a1] Sending complete > |______________________________________________________________________________ > > This time Asterisk gets what I expect but I prefer to use overlap dialing. > > Are there known issues with this? > > Thanks, > > Vieri > > > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users