hi all, I am trying to compile the correlator of tutorial 4 but i changed the adc to the acd083000x1. I have an error in the "Starting program map". i went to gen_xps_files (line 636) and there is an error with the system(['xps -nw -scr run_xps.tcl system.xmp']) command. I do not know what this command do, any ideas?
this is the matlab log #----------------------------------------------# > # Starting program map > # map -timing -detail -ol high -xe n -register_duplication -o > system_map.ncd -w > -pr b system.ngd system.pcf > #----------------------------------------------# > Release 14.2 - Map P.28xd (lin64) > Copyright (c) 1995-2012 Xilinx, Inc. All rights reserved. > PMSPEC -- Overriding Xilinx file > </home/arturo/xilinx/14.2/ISE_DS/EDK/data/Xdh_PrimTypeLib.xda> with local > file > </home/arturo/xilinx/14.2/ISE_DS/ISE/data/Xdh_PrimTypeLib.xda> > Using target part "5vsx95tff1136-1". > Mapping design into LUTs... > WARNING:MapLib:701 - Signal epb_addr_gp<5> connected to top level port > epb_addr_gp<5> has been removed. > WARNING:MapLib:701 - Signal epb_addr_gp<4> connected to top level port > epb_addr_gp<4> has been removed. > WARNING:MapLib:701 - Signal epb_addr_gp<3> connected to top level port > epb_addr_gp<3> has been removed. > WARNING:MapLib:701 - Signal aux0_clk_n connected to top level port > aux0_clk_n > has been removed. > WARNING:MapLib:701 - Signal aux0_clk_p connected to top level port > aux0_clk_p > has been removed. > WARNING:MapLib:701 - Signal aux1_clk_n connected to top level port > aux1_clk_n > has been removed. > WARNING:MapLib:701 - Signal aux1_clk_p connected to top level port > aux1_clk_p > has been removed. > WARNING:MapLib:41 - All members of TNM group > "infrastructure_inst_infrastructure_inst_sys_clk2x_int" have been > optimized > out of the design. > WARNING:MapLib:50 - The period specification > "TS_infrastructure_inst_infrastructure_inst_sys_clk2x_int" has been > discarded > because the group > "infrastructure_inst_infrastructure_inst_sys_clk2x_int" has > been optimized away. > *ERROR:Xflow - map: application received signal 9 > ERROR:Xflow:42 - Aborting flow execution... * > gmake: *** [__xps/system_routed] Error 1 > ERROR:EDK - > Error while running "gmake -f system.make bits". > Error using gen_xps_files (line 636) > XPS failed. > -- Atte. Arturo
